Hi all, its me again, and before anyone says so I've read the manuals and
the Howto's and axutils installed from a rpm
For some reason I still hav'nt sussed I cant get the node to do a nodes
broadcast. It wiil acept incoming on on port , ie the local one but not on
ports 2,3 or 7.
Every else works OK the netrom layer seems to perform as desired, including
outgoing and incoming addressed to the netrom alias.
Any ideas as to what I've missed in the setup, mine is identical apart from
callsigns to that used on gb7mip, which works .
<<nrports>> <<axports>> <<nrbroadcst>>
Ive include the axport ,nrport and nrbroadcst files incoming node broadcasts
from port 1 are added to /proc/net/nr_nodes , broadcasts received on ports
2,3 & 7 are ignored,
the axutils start ok without complaint <<rc.ax25>>
If some tolerant person could point to the mistake in the configuration I'd
be very gratefull,
Second question
are ther any docs on the set up of TPP as I'd like to move the converse
server away from TNOS ?
TIA
Regards
G8JVM sysop GB7IPT
Richard Bown RF Engineer
Anite
127 Fleet road
Fleet
GU13 8PD
cc important mail to me at "[EMAIL PROTECTED]"
Please note my views are not always the same as Anites
> Anite Systems Limited Registered in England No. 1721900 Registered
> Office: 353 Buckingham Avenue, Slough, Berkshire, SL1 4PF
>
>
nrports
axports
nrbroadcst
rc.ax25
