I am using baycom +PSK 1 on 7.030 Mhz 1200 bps, kernel 2.1.131
and it works fine.
for module baycom_ser_fdx use bcsf0-n
for module baycom_ser_hdx use bcsh0-n
73 de Jos - yb2sv
-----Original Message-----
From: Bill Nolte <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, December 22, 1998 02:21
Subject: Re: LINUX+BAYCOM - baycom_ser_hdx
>I am using a BayCom BP-1 modem with kernel 2.0.35 and baycom works fine.
>However if I boot kernel 2.1.127 baycom_ser_hdx loads but does not attach
>to the port properly. The only difference in the setup is the kernel
>I boot from (and therefore the baycom module loaded). Both drivers are
>configured as modules.
>
>What are the differences in the driver that might explain this? Is anyone
>else having this problem?
>
>This is my /etc/rc.ax25 file:
>
>/bin/setserial /dev/ttyS1 uart none baud_base 1200
>[ -s /lib/modules/`uname -r`/net/hdlcdrv.o ] && /sbin/modprobe hdlcdrv
>#[ -s /lib/modules/`uname -r`/net/baycom.o ] && /sbin/modprobe baycom
>[ -s /lib/modules/`uname -r`/net/baycom.o ] && /sbin/modprobe baycom
mode=ser12* iobase=0x2f8 irq=3
>#[ -s /lib/modules/`uname -r`/net/baycom_ser_hdx.o ] && /sbin/modprobe
baycom_ser_hdx
>[ -s /lib/modules/`uname -r`/net/baycom_ser_hdx.o ] && /sbin/modprobe
baycom_ser_hdx mode=ser12* iobase=0x2f8 irq=3 options=1
>#/sbin/sethdlc -p -i bc0 mode ser12* io 0x2f8 irq 3 half >/dev/null 2>&1
>/sbin/sethdlc -p -i bc0 half >/dev/null 2>&1
>/sbin/ifconfig bc0 hw ax25 KG6OL
>/sbin/ifconfig bc0 inet 44.253.253.1 up # bogus ip
>/sbin/route add -net 44.0.0.0 netmask 255.0.0.0 bc0
>/sbin/mheardd >/dev/null 2>&1 &
>
>Thanks
>
>Bill
>
>--
>[EMAIL PROTECTED] -- Public Access User -- Not affiliated with Teleport
>[EMAIL PROTECTED] -- Public Access User -- Not affiliated with Pacifier
>finger -l [EMAIL PROTECTED] for public key
