I have set up a sound card using afsk1200. This is working quite well so far
using
a suck it and see method of setting up the card.
The problem is that I do not seem to be able to get "smdiag" to work, if
some one could send me a simple script to set up smdiag then I may be able
to fine tune the card.
It is hoped to progress to higher speeds after initial testing on 1200 baud.
The sound card used is an intergrated card on a Cyrix media GX main board
and proved quite simple to set up as a sound blaster.
Mike
VK2MJ@VK2MJ.#SYD.NSW.AUS.OC
[EMAIL PROTECTED]
[EMAIL PROTECTED]
