Hi
I use a small program called axdigi written
by Craig Small to do that. It still works well.
The tar file is only about 12k if you'd like
a copy by email. Details are in the HAM-HOWTO
document.
73
Phil vk6ad
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Ralph Aichinger
> Sent: Wednesday, 11 August 1999 1:59
> To: [EMAIL PROTECTED]
> Subject: AX25-Routing question
>
>
> Hello!
>
> I hope this question sounds not too stupid, but after trying to figure
> it out for two days I thougt I might as well ask somebody who knows ..
>
> How can I get two ports on my machine to digipeat AX25 packets to each-
> other?
>
> I have connected 2 machines and want "orange" to be able to call out
> through port oe5arp-1 on "purpur".
>
> orange bpq-ethernet purpur
> oe5arp-4 ------------ oe5arp-2 (bpq0 on "ether")
> oe5arp-1 (bc0 on "tr2500")
>
> /proc/net/ax25_route on purpur:
>
> callsign dev mode digipeaters
> OE5ARP-4 bpq0 *
> OE3XSR-10 bc0 dg OE5XBR-0
>
> and on orange:
>
> callsign dev mode digipeaters
> OE5XBR-0 bpq0 * OE5ARP-2 OE5ARP-1
> OE5ARP-1 bpq0 * OE5ARP-2
>
> I don't know whether that makes any difference, but I have compiled the
> kernel on purpur with ip-forwarding enabled.
>
> I can connect from oe5arp-4 to oe5arp-2 but not from oe5arp-4 to oe5arp-1.
> If I try, I see packets both in tcpdump and in "listen -a".
>
> TIA and vy 73 de ralph oe5arp
>
>
