On Tue, 21 Sep 1999, you wrote:
> Hi Richard,
>
> On Tue, Sep 21, 1999 at 12:36:32PM +0000, Richard Adams wrote:
>
> > I am trying to get tunneling (ipip) working again like i had it
> > working with an old 2.0.xx kernel, then i had to use 2 modules, ipip
> > and new_tunnel, now there only seems to be one module ipip.o, i can
> > bring up the interface tunl0 with no problem but as soon as i try to
> > add routes, the old "munge" way, all i get is network is unrachable.
> > I've tryed adding routes one by one differnet ways, but nothing seems
> > to work for me, i hope at least someone can say read this or that
> > file.
>
> For new kernel You need the "iproute" or "iproute2" package from
> ANK except standart route tools, it can be found at:
> ftp://ftp.inr.ac.ru/ip-routing/iproute2-current.tar.gz
>
> And for make tunnel device You can make Ptp tunnel:
> "ip tunnel add T3 mode ipip local xxx remote yyy"
>
> Or don't set the mask for this device, for example:
> "ifconfig tunl0 <You address> netmask 255.255.255.255"
> and for route additional:
> "ip route add XXXXXX/XX via DDDDD dev tunl0 proto static onlink
Thanks i could not get to your URL but i did a net search and found a
closer URL, 10 minutes later i had tunneling working thanks for the
tip and examples, that made life easy..
73's and yours.
> Also, in this case, gated can't touch these route entry. >
> For example, this is my simple setup script for tunneling device:
>
> /sbin/insmod ipip
> /sbin/ifconfig tunl0 44.178.16.1 netmask 255.255.255.255 mtu 1024 up
> /sbin/ip route add 44/8 via 194.87.1.92 dev tunl0 proto static onlink
>
> --
> Best 73, Yuri
> E-mail:[EMAIL PROTECTED]
> AMPR: rz1awt.ampr.org
--
Regards Richard
[EMAIL PROTECTED]
