On Mon, 27 Sep 1999 [EMAIL PROTECTED] wrote:
Hi,
> Hi all !
> I use the baycom_ser_hdx driver for baycom modem with the 2.2.6 kernel. Time to time
> the driver stops receiving and sending packets (the outgoing packets are visible in
>the monitor but they're not sent, the TX packets number shown by 'ifconfig' doesn't
>increase). When switch the bcsh0 interface down and up, the driver starts to work
>again - for some time.
This is the same beaviour of scc driver!! Joerg, Thomas may be both
drivers have the same problem??
Luca
--------------------------------------------------------
Luca Palazzo -------------------------------------------
Ingegneria Civile - Universita' di Catania -------------
Email address : [EMAIL PROTECTED] --------------
--------------- [EMAIL PROTECTED] -----------------------
Ham addresses : [EMAIL PROTECTED] --------------
--------------- [EMAIL PROTECTED] --------------
--------------------------------------------------------
Home Page ------> http://genius.cdc.unict.it/~lpala ----
- Under Construction ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ----
--------------------------------------------------------
------- Visit our local Ham Association Web Site -------
------- http://www.ham.cdc.unict.it/~lpala/arical ------
--------------------------------------------------------
