Thanks!
I shall try it out.
Stefan
-----Ursprungligt meddelande-----
Fr�n: f5ibh <[EMAIL PROTECTED]>
Till: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Datum: den 27 september 1999 14:41
�mne: Re:linux & baycom modem
>Hi!
>
>SM7TIX wrote :
>>device is defered. In the /dev/ i cant find any device that is like bc0.
>
>Please read /usr/src/Documentation/networking/baycom.txt. You will see that
>the device /dev/bc0 dooesnt exist anymore.
>The name of the driver is : baycom_ser_fdx and the associated device is
>dynamically creatd with the name 'bcsf0'.
>
>First of all, configure your kernel with ax25 support and the correct baycom
>driver ;
> [*] Amateur Radio support
> --- Packet Radio protocols
> <M> Amateur Radio AX.25 Level 2 protocol (NEW)
> [*] AX.25 DAMA Slave support (NEW)
> < > Amateur Radio NET/ROM protocol (NEW)
> < > Amateur Radio X.25 PLP (Rose) (NEW)
> AX.25 network device drivers --->
>
>Yout don't NEED dama, this depends how is yu local digi working.
>You can add NET/ROM and ROSE if needed on your particular place.
>You can use modules : <M> or not : <*>
>
> --- AX.25 network device drivers
> < > Serial port KISS driver (NEW)
> .....
> .....
> <M> BAYCOM ser12 fullduplex driver for AX.25 (NEW)
> < > BAYCOM ser12 halfduplex driver for AX.25 (NEW)
> ...
>
>Use fullduplex driver even if (obviously), your modem is half duplex. For more
>information .. please, READ THE DOC !!
>
>After you have a new kernel running, maybe you have to install tfkiss too
>depending of what you want to do with your system.
>
>73 - regards
>
>Jean-Luc
>
