First, you need to use kissattach. If you already knew that, you need to
add something to it. You need to add the -i command (internet address).
If you don't have a static IP, just use a local IP like 192.168.1.0.
That will work. So, when you want to use kissattach for a port called
"radio" type:
kissattach /dev/ttyS# radio -i 192.168.1.0
That should get it going. I also had the same problem...
- KE4PSD ( Dustin McIntyre )
[EMAIL PROTECTED] wrote:
>
> Hi,
>
> I'm very new to this list, as I have only just started to incorporate
> AX.25 in my Linux box.
> I am having a problem in getting started, working through the ax25 HOWTO.
>
> I get to Section 6, Configuring an AX.25 port, and I find the kissparms
> command does not work for me. I get:
>
> #kissparms -p radio -t 100 -s 100 -r 25
> axconfig: port radio not active
> kissparms: no AX.25 ports configured
>
> I have entered the default values into the files of /proc/sys/net/ax25/ax0/*,
> I do have a reasonable /etc/ax25/axports file, and I have a Paccomm modem
> in kiss mode sitting on /dev/ttyS0.
>
> If anyone can offer insight, I would be most grateful.
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Eric Darnel
> Electrical Engineering Graduate Student
> University of Alaska, Fairbanks
> Duckering Building, Room 147
> Fairbanks, Alaska 99775
> [EMAIL PROTECTED]
> (907) 474-5265
> KL0RS
