I am using RedHat6.0 and a SCC card and it works well. You
just have to load the ax25 and scc module and run the sccinit app
that comes with the tar you have. Befor running sccinit, verify the
z8530.conf. It must match the irq/io of your board.
After that, if you isse a ifconfig -a, you should be able to see all
the scc interfaces. If your card has 4 ports, you should see scc0,
scc1, scc2 and scc4. Then just put the interface up like this
ifconfig scc0 44.xx.xx.xx hx ax25 CALLSIGN up.
Now, you must create the axports file, as described in the
AX25-HOWTO and then you will bw able to test the card with the
listen app.
I hope that�s what you were in need.
[]s,
Date sent: Sun, 31 Oct 1999 22:19:38 +0000 (GMT)
From: Stephen Kitchener <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: SCC and RedHat 6.x
Send reply to: [EMAIL PROTECTED]
> Hi Guys,
>
> Has anyone gone down this route with RedHat 6 and running an scc card.
> Is the latest one compatible and would I have to recompile it, or use
> the ones that are precomiled and come with the package.
>
> The only scc package that I can find that is at all current is
>
> z8530drv-utils-3.0-1.dl1bke.tar.
>
> Any help would be appriciated.
>
Alessandro Ren
[EMAIL PROTECTED]
"You can not save the world, but you can help to"
"The world is what you make of it"
