Hi, Thanks all for reading. I have problems to connect a Telephone Modem under LinFBB. Version 7.00g26, compiled from source, or some older versions. I First tried the g26 Version on my SuSE 6.1, glibc2 Based system I got everything working just fine, exept the Telephone Modem ! I have tried it with a 2.0 Kernel, and a 2.2 Kernel, because I thought that /dev/cua would not work with 2.2 I also tried to change the source to change cua in ttyS, but no succes there. I tried it with 2.0.35 and 2.2.13, both ended up with the same result. When doing so with a 2.2.13 kernel, I get a Kernel message that /dev/cua2 is obsolete, I should upgrade software to use /dev/ttyS2. That makes normal sense, but doesn't seem to be the root of my problem. When FBB starts, the Recieve Data and Send Data leds light up, but the AT Commands in my inittncx.sys ( 6 ) don't get send to the Modem .. When I use echo atz >/dev/cua2 without FBB running, the modem gets initialised OK. Somehow the Modem doesn't get initialised properly and cannot be accesed by Xfbb. I get almost the same result If I switch to Slackware 3.6, with a 2.0 kernel. The only thing that differs is that there are some cua Overrun lines printed on my screen. But still no sign off live as far as the Telephone Modem is concerned. I did everything according to the DOCs found on F6FBB's Site. I tried different Modems, Internal and External, and checked the cable wiring of the External Modems. They were OK. Normally I can get everything working properly under Linux, but this puzzles me. /dev/cua2 (and /dev/ttyS2) in my case have the right permissions (rw-rw-rw), Modem works properly with Minicom or a connection to my ISP. I used the correct parameters in port.sys for this Modem, again according to the DOCs. The thing thats bugging me, that when FBB starts, deamon, the modem shows signs of live, some LEDS go on and off.. but I cannot seem to call this modem, though inittncx.sys (6 in my case) has ATZ, and ATS0=1 mentioned. Outgoing doesn't work either.. If I set up a forward on the telephone Modem port. Please, can anyone help me ?! I don't think that I am the only one that wants to use a Telephone Modem with Xfbb ? Maybe someone can send me some working configs, although I think I've got everything right ? Many thanks in advance, 73 de PE1PXN Berry, PE1PXN Email [EMAIL PROTECTED]
