Is it to all stations or just to one station? Or is one station the only
thing you can hear or get a response from?
It has been a few years since I used my baycom and don't know much about
the soundcard TNC software. but from what it sounds like... You have
either a filter turned on or something else.
Check for
CONect List
this will determine who may use your station for any purpose.
when on only those stations in the list can connect... when off anyone
can use it.
CONOK make sure it is on. it takes connect requests from other TNCs
but that will tell you someone was trying to connect to you.
DIGipeat make sure this is on. allow others to digipeat through you.
FIlter should be off
LList check this .. its another thing that will not let someone connect.
those are the only thing I can think of right now...
What kinda software are you running under widows? and what kinda software
are you running under linux?
Jess
On Thu, 11 Nov 1999 14:45:06 -0200 "Alessandro Ren" <[EMAIL PROTECTED]>
writes:
>
> Hello all,
>
> I�ve had the following happening when doinbg packet. I can
> monitor all the traffic pretty well, so I issue a connect request
> and I
> can see that my request is sent and I can hear on the traffic
> monitor window, that the station I am trying to connect answers my
> request, but the software simple ignores this answer. although it
> listens to the it.
> This has happend under DOS and Linux, using a Baycom
> modem and a SoundBlaster as a modem.
> Any idea??
>
> Thanks a lot.
>
> Alessandro Ren
> [EMAIL PROTECTED]
> "You can not save the world, but you can help to"
> "The world is what you make of it"
___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
