Hello All,
Merry Christmas
I would like some advice on how to get the <CR) added back to my Convers
server when my users connect in to my Linux_node via the AX25 network.
They are using a non TCP/IP programs as their terminal program.
Use to work fine on my previous set-up.
Not noticed the problem when using TCP/IP end to end connections.
User connects to Linux_node-.0.3.0
Select CONV alias using the updated syntax example in the distribution
~etc directory.
The alias calls telnet host 3600 {plus options}
to connect to Convers http-1.2.2
The only thing I can think of. Are there in flight options to Telnet
to force line mode. Or am I on the wrong track.
I have spent a few hours looking around for the answer, even not
mentions on linux_archives
Also on the linux_node prompt line, I have Telnet Connect and at the
end of the prompt ZConnect ZTelnet
Has anyone else seen this and know how to remove these erroneous
commands
I have carried out a total rebuild of my system and made live.
Slakware 7.0
ax25-apps-0.0.4
libax25-0.0.7
node-0.3.0
http-1.22
I would be grateful for any feedback or ideas to follow up.
regards
Paul g4apl (gb7cip.ampr.org)
--
[EMAIL PROTECTED]
