Season's greetings to all list subscribers..
I learned a lot about linux in this last few months, but obviously not
enough.
I have missed something! for some reason fhe SCC's don't work properly.
I used the example info in the docs that came with the latest scc drivers
from dl1bke.
When the 1200baud SCC transmits, all that comes out seems to be a very long
tone, with a tiny 'bip' of something in the middle. I checked the settings
against the docs, and I can't see anything wrong. I guess the 9600baud ports
are doing the same thing too.
None of the scc's rx anything, even though there is valid data on the
channels.
The two scc cards are : BAYCOM USCC, and PacComm PC100. I use all the ports,
so that's a total of 6 scc devices.
My two kiss tnc's seem to be working ok, at least I got something right!
The SCC cards worked fine under DOS with BPQ.
I have already re-compiled the driver with the scc_delay's defined just in
case the bus speed is too fast for them. And they both have Zilog Z8530's
fitted.
Kernel is 2.2.13, latest ax25utils, ax25tools, and libax25.
Anyone got any ideas, or a few pointers of where to start looking for the
trouble?
Rob G1ZPU
===================================================================
Get paid to surf the web, tell your friends, and get paid while they surf
too!
Check out: http://www.teamdangerous.com
Links, Motorsport, A look a the lighter side of Amateur Radio, Homebrewing
and more
===================================================================
