Rob,
Are you using modules for the SCC or direct. If modules please send the
config file . z8530drv.conf ??
Perhaps then we can see more !@
Martin
On Sun, 26 Dec 1999, Rob Compton wrote:
>
> Season's greetings to all list subscribers..
>
> I learned a lot about linux in this last few months, but obviously not
> enough.
>
> I have missed something! for some reason fhe SCC's don't work properly.
> I used the example info in the docs that came with the latest scc drivers
> from dl1bke.
>
> When the 1200baud SCC transmits, all that comes out seems to be a very long
> tone, with a tiny 'bip' of something in the middle. I checked the settings
> against the docs, and I can't see anything wrong. I guess the 9600baud ports
> are doing the same thing too.
>
> None of the scc's rx anything, even though there is valid data on the
> channels.
>
> The two scc cards are : BAYCOM USCC, and PacComm PC100. I use all the ports,
> so that's a total of 6 scc devices.
>
> My two kiss tnc's seem to be working ok, at least I got something right!
>
> The SCC cards worked fine under DOS with BPQ.
>
> I have already re-compiled the driver with the scc_delay's defined just in
> case the bus speed is too fast for them. And they both have Zilog Z8530's
> fitted.
>
> Kernel is 2.2.13, latest ax25utils, ax25tools, and libax25.
>
> Anyone got any ideas, or a few pointers of where to start looking for the
> trouble?
>
> Rob G1ZPU
>
>
> ===================================================================
> Get paid to surf the web, tell your friends, and get paid while they surf
> too!
> Check out: http://www.teamdangerous.com
> Links, Motorsport, A look a the lighter side of Amateur Radio, Homebrewing
> and more
> ===================================================================
>
>
