On Sun, 09 Jan 2000, Ted Wager wrote about, Re: telnet??:
> > A normal stn, would have routes defined to all "reachable hosts" on each
> > interface, then all hosts which are reachable VIA a gateway would have
> > for example;
> >
> > route add -net 44.137.28.0 netmask 255.255.255 gw 44.137.28.27 scc3
> >
> > The above routes all unknown Dutch 44.137.28 (Zeeland subnet) from my
> > machine to 44.137.28.27 (pi1goe.ampr.org).
> >
> > Route all unknown IP# world wide to pi1goe.ampr.org
> >
> > route add -net 44.0.0.0 netmask 255.0.0.0 gw 44.137.28.27 scc3
> >
> Hi ...
> The station in question is directly reachable...Only a couple of miles
> away and we are both trying to set up the ax25 system...The result of the route
> query....
> bash-2.03# route -ne
> Kernel IP routing table
> Destination Gateway Genmask Flags MSS Window irtt Iface
> 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
> bash-2.03#
You dont have any routes, only loopback.
route add g3zzz ax0
will set the route for g3zzz however if kissattach was succesfull there
should be a default route attached by kissattach, make sure you have the
interface up before doing the above.
You might also want to set the window size mss and irtt via the route
command, a typical line would be.
route add g3zzz window 512 mss 256 irtt 4000 ax0
man route will explain.
>
>
>
>
> Regards Ted
>
> Ted Wager.......SuSe Linux 6.3
> g3tpi.ampr.org 44.131.147.8
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
Happy New Year
