I'm all set now.
I'd set my serial port to 9600 but my bios had it at 115200.
I've reset it to 115200 and it works.
73,
Peter email: [EMAIL PROTECTED]
AX25:[EMAIL PROTECTED]
web: http://www.gracefamily.net
Tomi Manninen wrote:
>
> On Sun, 23 Jan 2000, Peter Grace wrote:
>
> > Thanks to Hans-Peter,
> > I cleaned out my old /etc/ax25 directory and removed the lines from my
> > rc.local
> > and used his method (http://1409.org/papers/ax25-config-howto.html) to
> > resetup ax25. I'm not getting any better results.
> > Packet seem to make it to the ax25 socket but don't make it out the
> > serial port - they aren't being shown on my tnc our going out my radio
> > (or incoming packets heard by my ax25d).
>
> Just a wild guess in case you haven't checked already. Is your TNC serial
> connection bitrate correct in both ends? The "speed" field in axports file
> is the serial bitrate, not the radio baud rate. I've made that mistake a
> couple of times in the past...
>
> --
> Tomi Manninen Internet: [EMAIL PROTECTED]
> OH2BNS AX.25: [EMAIL PROTECTED]
> KP20ME04 Amprnet: [EMAIL PROTECTED]
