Thanks to Hans-Peter,
I cleaned out my old /etc/ax25 directory and removed the lines from my
rc.local
and used his method (http://1409.org/papers/ax25-config-howto.html) to
resetup ax25. I'm not getting any better results.
Packet seem to make it to the ax25 socket but don't make it out the
serial port - they aren't being shown on my tnc our going out my radio
(or incoming packets heard by my ax25d).
I'm wondering if it's a routing problem.
perhaps someone can shed some light -
Here's what the output of route looks like:
(this machine is on a lan as well as having a tnc on /dev/ttyS0)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.1.5 * 255.255.255.255 UH 0 0 0
eth0
192.168.1.0 * 255.255.255.0 U 0 0 0
eth0
127.0.0.0 * 255.0.0.0 U 0 0 0
lo
44.0.0.0 * 255.0.0.0 U 0 0 0
ax0
default majel.gracefami 0.0.0.0 UG 0 0 0
eth0
--
Peter Grace [EMAIL PROTECTED]
http://www.gracefamily.net/
(remove the obvious to reply)
