On Fri, 07 Apr 2000, Manos Chalaris (SV1DAY) wrote about, How to Enable/Disable KISS
mode in a TNC-2 with Linux?:
> Hello everybody,
>
> I am wondering whether there is a "nice" way to enable/ disable KISS mode on
> a TNC-2 with Linux.
> (I am using an MFJ 1270C, but I think the same is for all the TNC-2 type
> TNCs...)
>
> According to the manual of MFJ, it says the way to enable and disable KISS
> mode if you are using the JNOS program (Enable: KISS ON and RESTART and
> Disable: param <interface_name> 255 from the command prompt of JNOS).
> It does not mention anything about other software or operating system.
> Also, there is another method, according to MFJ manual, in order to disable
> KISS mode. To remove jumper JMP5, and wait 5 few minutes, then reinstall
> it.......!!!!!!!!
>
> Does anyone knows and nice way, like the one in JNOS?
kissparms -x
Never used it but according to the man page it should work.
>
> Thanks.
>
> 73 de SV1DAY
> Manos
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
