> On Sat, Apr 22, 2000 at 05:01:07PM -0300, Jose R. Marte A. wrote:
> > Hamish I have made the patch to the aprsd 2.1.1
> > for the support of the ax.25 tools in RedHat 6.1
> > and in a same way I made it with the APRSD 2.1.0,
>
> I will bring out a new version of the aprsd mods for 2.1.1.
> But it should work OK just patching them as you did.
>
> > socket: Invalid argument
> >
> > and it exit, I was looking in the file sockets.ccp
> > in the following line:
> >
> > / * Create the receive socket * /
> > if ((rx_socket = socket(AF_PACKET, SOCKET_PACKET, htons(proto))) == -1)
> >
> > if I change the AF_PACKET for the AF_INET, the program works in TX
> > via RF Link but non RX in the RF Link, in RedHat 6.1 as AF_PACKET yes
> > it works using the ax25 tools in RX
> >
> > My main Question is your patch works for the RedHat 5.2 ??
>
> AF_INET is for TCP/IP and not for AX.25 though. I think the problem
> is that you are not running aprsd as root -- it must be run as root
> to create the AF_PACKET socket if I recall correctly? (Just as
> "listen" must be run as root -- and listen is where I got the above
> code from originally.)
>
>
> Hamish
> --
> Hamish Moffatt VK3SB <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
Ok Hamish thanks for the Reply
the aprsd210 and the aprsd211 both working very nice on RedHat 6.1 with
the ax25 sopport without problem
my problem is on the RedHat 5.2 and always I run it as root not user
ok btw thanks again
73's Jose (hi8gn)
[EMAIL PROTECTED]
