On Wed, 24 May 2000, Stordeur Franck 785966045 wrote about, Serial communication
with TNC using minicom:
> Hello,
>
> I try to establish a serial communication with a TNC2 using the minicom
> programm (1.82-3) without any success.
> I run debian 2.1
> Does anybody having success with minicom and tnc could help me and give me the
> parameters necessary to establish communication ?
> Regards.
Providing the TNC is in working order and minicom is confgured properly,
then minicom should see the TNC without any commands.
Quite possably you need to send a certain character to the TNC, for example
a PK232 needs a few * asterisks, it should then return its checksum to
minicom.
After that you can use the TNC commands, or set the TNC into kiss mode with
what ever init string(s) it needs.
> ON4LCN
>
>
>
> ___________________________________
> Franck Stordeur Ing
> SNCB - CS Informatique IN.211 sec 45
> Interconnexion de r�seaux
> 85, Rue de France, 1060 Bruxelles
> e-mail: [EMAIL PROTECTED]
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
