There are rpm's for these packages available on the mirror sites.
Wilson, WJ3G
[EMAIL PROTECTED]
[EMAIL PROTECTED]
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Richard Adams
> Sent: Friday, May 26, 2000 5:39 AM
> To: [EMAIL PROTECTED]
> Subject: Re: TCP/IP over AX.25
>
>
> On Fri, 26 May 2000, Christopher K. George wrote about,
> TCP/IP over AX.25:
> > New to this list, but here's my question:
> >
> > I cannot get the AX25-utils-2.1.42 to compile properly on
> my Linux system
> > with
> > out making considerable modifications to the headers
> included in a number
> > of the source files. When I finally got it to compile I
> couldn't get my
> > kiss device attached. I am using kernel version 2.2.5-15.
> I am using Red
> > Hat Linux 6.0. I have net tools ver 1.51 and also tried ver 1.34.
> >
> > "kissattach /dev/ttyS0 1" returned "AX.25 prot 1 bound to device
> > ax0" which looks good, but "kissparms -p 1 -t 100 -s 100 -r
> 25" returns:
> >
> > axconfig: port 1 not active
> > kissparms: no AX.25 ports configured
> >
> > Wuz up? Should I just revert to Kernel 2.0? I've been
> using linux for
> > only maybe four months, but have 5+ years expierence with C
> at hardware
> > level--what ever that's worth.
> >
>
> Redhat 6.0 is a glibc system, there for ax25-utils-2.1.42 is not the
> correct archive to use.
>
> You need to use the new set of ax25 tools, apps and node which can be
> found on most linux mirror sites.
>
> Another palce to look is;
>
ftp://hes.iki.fi/pub/ham/linux/ax25
> Thanks for any help,
>
> Christopher George, KE4KUK/DU1
> Brooke's Point
> Palawan
> Philippines
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
