On Sat, 03 Jun 2000, Marco Calistri wrote about, ?NETWORK?:
> Hello the following question may be should be posted on the nos-bbs@hydra,
> but I think it isn't a full "off-topic".
In view of the Linux ax25 NET/ROM capablitys i would say yes its off topic,
however i belive your problem(s) are in the linux configuratrion, (i could
be wrong) but here goes.
> The problem I wonder overcome is abot how to reach by local area network
> (lan) the JNOS/LINUX machine using a WINDOWS machine.
> If I issue a TELNET toward linux machine I can only reach the linux side of
> servers,
> not the JNOS.[telnet 44.134.210.33 & telnet 192.168.2.1]
> All the N.I.C. are full operational and from linux terminal window I can
> ping
> to all the private address,the same from the windows (ms-dos prompt) to
> linux.
> System description:
> machine1- 486DX2 WIN'95 - i.p.a.192.168.2.2 & 192.168.2.3 (2 NIC)
> machine2- 586MMX LINUX RH6 - i.p.a.192.168.2.1
> On the linux machine I have JNOS 1.11e that (thanks to many of you!)
> works perfectly also as client/server with Netscape/linux (browser-mailer).
> Here the /etc/rc.d/rc.local
> ---
> echo "Inizializzo la connessione SLIP col JNOS/linux..."
> /sbin/slattach -s 38400 -p slip ptype &
> /bin/echo "Attendi che il processo slattach sia finito"
> /bin/sleep 3
> /sbin/ifconfig sl0 broadcast 44.255.255.255 pointopoint 44.134.210.32 mtu
> 1500 44.134.210.33
I belive if you look carefully at your screen when you run the above you
will see a few errors, meaning your command line above is no good, or it
seems that way.
I get
SIOCSIFBRDADDR: Cannot assign requested address
SIOCSIFDSTADDR: Cannot assign requested address
When trying your example above,
What happens if you try;
/sbin/ifconfig sl0 linux-machineIP# pointopoint jnosIP# mtu 1500
> /sbin/route add 192.168.2.1 sl0
> /sbin/route add -host 44.134.210.32 dev sl0 metric 1
> /sbin/route add -net 44.0.0.0 netmask 255.0.0.0 irtt 60000 gateway
> 44.134.210.32 dev sl0 mss 951 window 1902
I would think the above will fail also considering the interface is not
configured properly because ifconfig failed to interpret your command.
> /usr/sbin/arp -Ds 44.134.210.32 eth0 pub
> /usr/sbin/arp -Ds 192.168.2.1 eth0 pub
Possably the above are not even nessasary, i never use staic arps or any
other form of arp.
> ---
> My JNOS i.p.a. is 44.134.210.32 (ik5bcu.ampr.org) the 44.134.210.33 its used
> by linux
> from JNOS screen I can ping only toward amprnet,44.134.210.32,44.134.210.33
> and 192.168.2.1;
> I cannot toward win machine addresses:192.168.2.3 nor 192.168.2.2.
> I wonder know if should I insert some statements on this file or the problem
> can be solved
> adapting the autoexec.nos itself.
You problem lies in the syntax of ifconfig for sl0 i belive, what does
ifconfig sl0 and route reveal for sl0 ??.
>
> TNX!
> --------------
> 73's! da/from:
>
> Marco Calistri QTH Montecatini Terme (Pistoia) LOC:JN53JV
> ik5bcu.ampr.org [44.134.210.32] Tcp/Ip JNOS v.1.11e
> AMPRNET: [EMAIL PROTECTED]
> WWW: [EMAIL PROTECTED] WWW pages http://www.qsl.net/ik5bcu/
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
