Re: SCC Card + Baycom 1k2 Modem ???

[ron jochems]

Cyril,   off course you can connect it, just make sure the rx/tx/ptt leads are connected to the correct pins on the scc kart... They differ from com-port pins. also a problem which i found was that the opto-couplers which are on my (original) scc card messed up my ptt... I guess that you don't have opto-couplers on your self-build card and you don't have this problem.   After all all is working fine and lot's better than on com-ports ..   Grtz,   PD1ACf ron   -----Original Message----- From: Cyril Moriarty <[EMAIL PROTECTED]> To: Linux Hams Mailing List <[EMAIL PROTECTED]> Date: Sunday, July 02, 2000 2:47 AM Subject: SCC Card + Baycom 1k2 Modem ??? Hi,     I have just built an SCC card and want to check if it is working. The only packet modem that I have available is a Baycom 1200 baud. Can I connect the Baycom modem directly to the SCC card?   Thanks in advance, Cyril EI4AGB