On Fri, 14 Jul 2000, Brian Wilde wrote about, Tiny2 & STA led:
> Hi All
>
> When I reboot Linux having left the Tiny2 in kiss mode the STA led remains on
> when I try to connect to a station. The PTT led does try to send packets but no
> connect results. If I reset the Tiny2 by switching on-off then the STA led
> goes out but I can not receive any packets. If I try a connect again then the
> STA light remains on as above.
>
> When I first set up from the TNC being in the command mode I do the following
> and its OK.
>
> Boot Linux (Debian 2.1) kernel 2.2.14
> Put TNC in kiss mode with Minicom.
> start Kissattach
> start LinPac
>
> Linpac is working fine!
> Shut down Linux leaving TNC in kiss mode
> reboot Linux
> start Kissattach
> start LinPac
>
> Then the above problem occurs
> I have cleared out the TTY lock file in /var/lock with no effect.
I had a tiny 2 once, it would NOT stay in kiss mode, could it be you have
the same problem.???
>
> Help please
>
> CU 73's Brian
> G3VWH
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
