> -----Original Message-----
> From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, 18 July 2000 6:01 am
> To: '[EMAIL PROTECTED]'
> Subject: RE: Dual Soundmodems
>
> Hi Peter,
> I run 2 soundmodems under Red Hat 6.1 on a P233 with 64 MB of RAM. One
> runs 9600 on 70cm
Can you tell me what breed of card it is?
> and the other runs 1200 on 2m for the DX cluster.
and this one?
> I just found enough free IRQs to run both,
this is the interesting bit. I've tried the ESS card at irq 5 and
the PnP at irq 7 but no go.
> and installed them as SM0 and SM1 just as you would a single one.
When I try sethdlc on the second card it prepares the resources but
when ifconfig time comes the 2.2.14-12 kernel says something like "WSS: no
card configured at
0x534, IO: 0xff" trying it at 0xff gives "operation not permitted."
trying it with 2.0.36 and setcrystal and I get "operation not
supported by device".
Also if I put the two cards in the 2.0.36 machine and run my usual
(single ESS card) startup script it no longer works correctly.
I'm wondering now if I should rewrite it so it configures that card
first (using only sethdlc) and then setcrystal the other card?
> No problem, via our local node, I can connect to myself cross band and
> cross speed (sad eh! :-)
Your never alone with packet! ;-)
> 73
>
> John G4BAO
> [EMAIL PROTECTED]
>
>
>
