Yes. if you type ifconfig without arguments you will see if sm0 is there or
not. If not you may have to edit modules.conf/conf.modules as shown in
AX25-HOWTO
> -----Original Message-----
> From: David Nesting [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, 24 July 2000 8:24 am
> To: [EMAIL PROTECTED]
> Subject: Re: Soundmodem problem
>
> As I'm sure you'll get dozens of messages saying, networking devices are
> not "devices" in the sense that they have /dev entries. They're entirely
> in the kernel and visible only via things like ifconfig.
>
> David
>
> On Sun, Jul 23, 2000 at 05:16:41PM -0700, Rich Hall wrote:
> :
> :
> : Hello,
> :
> : I am new to the list and I have a question. After about a week now of
> major
> : digging into this I am still no further along than I was a week ago (but
> I
> : sure have a good handle on how to build all of the AX 25 support into
> Linux
> : in any way that you could imagine). I can not get the /dev/sm0 devices
> to
> : create. There seems to be no information on how to create them anyplace
> : other than the statement that the soundmodem driver creates them when it
> is
> : inited. Well it has not done this on my system.. ever.. There is no
> info
> : on MAJOR/MINOR device node values or anything anywhere that I have seen
> : either.
> :
> : Any help would be greatly accepted.
> :
> : -Rich
> : ------------------------------------------------------------------------
> : Rich Hall - http://www.netlynx.com/rich
> : E-Mailto:[EMAIL PROTECTED]
> : Amateur Radio: KF6ARX
> : DX Cluster Server: telnet kf6arx.netlynx.com port 4242
> : ------------------------------------------------------------------------
> :
