On Sun, 30 Jul 2000, Bill & Chris Shell wrote about, RE: KPC-9612:
> Richard,
>
> Thank you for your reply.
>
> I was really not very clear when I asked my question. I'm sorry.
I understood the question ok ;-) so it was clear.
>
> I had this working ok, but then I upgraded the kernel to 2.2.14, and changed
> to the new AX25 apps, tools, and libs. When I did this, I of course, got
> the errors from the changes in mkiss and kissattach. I made the changes to
> get rid of the errors, but it still didn't work on the 9600 baud port.
>
> It is working now. During this testing phase I have the system do a reboot
> at 3 a.m. local time. When I logged in this morning it was working. I'm
> not sure why it wasn't working, but after two days of trying I wanted to
> find out if anyone else was having a similar problem.
Now i am very interested to hear "why" a linux machine needs to be rebooted
at "anytime".????
>
> Thanks to all that responded.
Anyway glad to hear it now works.
>
> 73, Bill
> N6WS
> [EMAIL PROTECTED]
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Richard Adams
> Sent: Sunday, July 30, 2000 2:40 AM
> To: [EMAIL PROTECTED]
> Subject: Re: KPC-9612
>
>
> On Sun, 30 Jul 2000, Bill & Chris Shell wrote about, KPC-9612:
> > Hello,
> > Is there any information available for setting up a KPC-9612 TNC?
> > I'm using kernel v2.2.14 and the latest AX25 tools, apps and lib.
>
> Read section 6.1.1.1 of the AX25-HOWTO found in your /usr/doc/*HOWTO*
> directory(s).
>
> > 73, Bill
> > N6WS
> > [EMAIL PROTECTED]
> --
> Regards Richard
> [EMAIL PROTECTED]
> http://people.zeelandnet.nl/pa3gcu/
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
