This is the same problem that I have with my installation. And my settings
for the card are correct. It is a SB PCI 128 and it works when configured
with the sound drivers installed which is where I got the settings from to
start with.
-Rich
At 11:21 AM 8/7/2000 +0400, you wrote:
>I compiled the Kernel with care of ax25 inside.
>After #setcristall, #sethdlc, #ifconfig and #smmixer commands
>I print: ifconfig sm0
>Reseive:
>sm0 Link encap:AMPR AX.25 HWaddr OH2BNS-1
> inet addr:192.168.1.3 Mask:255.255.255.0
> RUNNING MTU:256 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> Interrupt:7 Base address:0x534 DMA chan:1
>(Simpl ifconfig show me only eth0 and loopback. But sm0 is absent.)
>
>Then I print: smdiag -i sm0
>smdiag: Version 0.2; (C) 1996-1997 by Thomas Sailer HB9JNX/AE4WA
>interface sm0 down
>
>If I print: /sbin/ifconfig sm0 up
> Result:
> SIOCSIFFLAGS: No such device
>Where there can be a mistake?
------------------------------------------------------------------------
Rich Hall - http://www.netlynx.com/rich
emailto:[EMAIL PROTECTED]
amateur radio: KF6ARX
------------------------------------------------------------------------
