Hello Krzysztof,

On 12/12/23 14:26, Krzysztof Kozlowski wrote:
On 12/12/2023 17:40, Ninad Palsule wrote:
This drop adds following devices in the device tree.
- EEPROM/VPD
- Power supplies
- Humidity, pressure and temperature sensors.
- Trusted platform module(TPM) chip

Tested:
     This board is tested using the simics simulator.

Signed-off-by: Ninad Palsule <ni...@linux.ibm.com>
---
Don't mix DTS with drivers. DTS and drivers go via different subsystems
and cannot have dependencies, so why DTS is patch #6, then driver #7 and
now again DTS #7?
I have sent a driver patch as a separate patchset and removed it from this patchset.


  .../dts/aspeed/aspeed-bmc-ibm-system1.dts     | 76 +++++++++++++++++++
  1 file changed, 76 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts 
b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
index 75562aa63701..d960b938fe8d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -461,6 +461,11 @@ &kcs3 {
  &i2c0 {
        status = "okay";
+ eeprom@50 {
+               compatible = "atmel,24c64";
+               reg = <0x50>;
+       };
+
        regulator@60 {
                compatible = "maxim,max8952";
                reg = <0x60>;
@@ -655,6 +660,25 @@ pca0: pca9539@74 {
&i2c2 {
        status = "okay";
+
+       power-supply@58 {
+               compatible = "ibm,cffps";
+               reg = <0x58>;
+       };
+
+       power-supply@59 {
+               compatible = "ibm,cffps";
+               reg = <0x59>;
+       };
+
+       power-supply@5a {
+               compatible = "ibm,cffps";
+               reg = <0x5a>;
+       };
Missing blank line

Fixed it.

Thanks for the review.

Regards,

Ninad


+       power-supply@5b {
+               compatible = "ibm,cffps";
+               reg = <0x5b>;
+       };

Best regards,
Krzysztof


Reply via email to