Hello Krzysztof,
On 12/12/23 14:20, Krzysztof Kozlowski wrote:
On 12/12/2023 17:39, Ninad Palsule wrote:From: Andrew Geissler <geissona...@yahoo.com> Add a device tree for IBM system1 BMC board. It uses AST2600 SOC. Tested: This board is tested using the simics simulator. Signed-off-by: Andrew Geissler <geissona...@yahoo.com> Signed-off-by: Ninad Palsule <ni...@linux.ibm.com> --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 188 ++++++++++++++++++ 2 files changed, 189 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index 3e3e6b96cb79..6f7ed11978ff 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-ibm-rainier-1s4u.dtb \ aspeed-bmc-ibm-rainier-4u.dtb \ + aspeed-bmc-ibm-system1.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-inspur-nf5280m6.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts new file mode 100644 index 000000000000..01291b407f59 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2023 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "System1"; + compatible = "ibm,system1-bmc", "aspeed,ast2600"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8 earlycon";Drop early con, debugging feature not release. Then use stdout path alone, so drop console as well.
Fixed as per your suggestion.
+ }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + event_log: tcg_event_log@b3d00000 {No underscores in node names.
Fixed. Thanks for the review. Regards, Ninad
Best regards, Krzysztof
