The current pinctrl properties apply only to the pxav1 controller.
Adding one default pinctrl node to a pxav3 controller therefore causes
a schema warning.
Check the existing properties only on pxav1. pxav2 and pxav3 may add
their own set of pinctrl properties if and when needed.
Signed-off-by: Duje Mihanović <d...@dujemihanovic.xyz>
---
Changes in v16:
- New patch
---
.../devicetree/bindings/mmc/sdhci-pxa.yaml | 36 ++++++++++++----------
1 file changed, 20 insertions(+), 16 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
index
4869ddef36fd89265a1bfe96bb9663b553ac5084..e7c06032048a3a73eb3eb67a887e75db273ffa92
100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -30,6 +30,26 @@ allOf:
maxItems: 1
reg-names:
maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mrvl,pxav1-mmc
+ then:
+ properties:
+ pinctrl-names:
+ description:
+ Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin
between
+ SDIO CMD and GPIO mode.
+ items:
+ - const: default
+ - const: state_cmd_gpio
+ pinctrl-0:
+ description:
+ Should contain default pinctrl.
+ pinctrl-1:
+ description:
+ Should switch CMD pin to GPIO mode as a high output.
properties:
compatible:
@@ -62,22 +82,6 @@ properties:
- const: io
- const: core
- pinctrl-names:
- description:
- Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between
- SDIO CMD and GPIO mode.
- items:
- - const: default
- - const: state_cmd_gpio
-
- pinctrl-0:
- description:
- Should contain default pinctrl.
-
- pinctrl-1:
- description:
- Should switch CMD pin to GPIO mode as a high output.
-
mrvl,clk-delay-cycles:
description: Specify a number of cycles to delay for tuning.
$ref: /schemas/types.yaml#/definitions/uint32
--
2.50.0
