Linux-Hardware Digest #729, Volume #13 Sat, 14 Oct 00 23:13:05 EDT
Contents:
Re: TV Tuner/Video Capture cards that support Win2K or Linux? ("Eric Vey")
Re: canon bjc 250 (Steve White)
Canon BJ-30 printer (Peter Greenwood)
Re: EverGreen Spectra 400 MHz ("Carl S. Isgro")
Re: ati rage PRO compatibility (Gary Sandine)
Re: XFree86 4.0.1/nvidia driver Modeline rejection problem (Gary Sandine)
Re: TV Tuner/Video Capture cards that support Win2K or Linux? (Lou Abney)
Re: ATI Rage 128 Pro & Redhat 6.2 - Help (Gary Sandine)
Re: 10base2 hubs, where can I find one? ("Da FaNToM")
Re: looking for terabit ethernet cards for linux (John)
Billion PCI ISDN CARD causes system-halt when driver loaded. ("FreeX")
Re: Problems with SB Live! ("Paul Kuliniewicz")
Re: Which distribution? (John)
Help setting up printer. (Casey Henderson)
Re: TV Tuner/Video Capture cards that support Win2K or Linux? (Igor)
----------------------------------------------------------------------------
From: "Eric Vey" <[EMAIL PROTECTED]>
Crossposted-To: rec.video.desktop,comp.os.linux.misc
Subject: Re: TV Tuner/Video Capture cards that support Win2K or Linux?
Date: Sat, 14 Oct 2000 20:16:30 -0400
I like the Hauppauge card. It runs fine in Windows 2000.
Not many bells and whistles in the software as in no scheduled digital
recordings, though. And you have to bring your own codec (I like PicVideo's
MJPEG free for registering one).
640x480 is the maximum I can get out of it, but the drivers are rock solid on
either an Intel chipset MB or a VIA based one.
"Igor" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> If you know of any decent TV/Video Capture card that supports EITHER
> Win2k or Linux, please let me know. (I expect that most people would not
> know a card that supports both just because they do not deal with the
> two operating systems. So please let me know the cards that support
> one of them).
>
> --
> ***********************************************************************
> Do your algebra homework at http://www.algebra.com
> Solve: x^2+4x+3=0 Plot: y=3*sin(x^2) Ask Questions Word Problems
> http://www.algebra.com
> ***********************************************************************
------------------------------
From: [EMAIL PROTECTED] (Steve White)
Subject: Re: canon bjc 250
Date: Sat, 14 Oct 2000 17:54:40 -0700
I use the Canon BJC 600 filter to print in color on a BJC-250
with RedHat Linux.
With a B&W cartridge and "Fast text printing" turned on, it prints
ascii text pretty fast, too.
It's a pretty good printer for occasional use, and if you don't need
high photo quality. I've found it fine for my needs.
In article <[EMAIL PROTECTED]>, "Tage V. Madsen"
<[EMAIL PROTECTED]> wrote:
>It works with the 100/200/210/240 filter available from printtool
>(printtool is RedHat only, I think), _except_ that I haven't found a way
>to make it print in color, does anyone know how to do that?????
>
>Other than that, I think it is a pretty good printer, at least considering
>the price.
>
>-Tage V. Madsen
>
>Christophe Beljouani wrote:
>
>> Hi,
>>
>> Does anyone know if the canon bjc 250 works fine with linux ? also, is
>> it a good printer ?
>>
>> Thanks for any help,
>> Christophe
--
Remove "_nospam" from my name to reply by e-mail.
------------------------------
From: [EMAIL PROTECTED] (Peter Greenwood)
Subject: Canon BJ-30 printer
Date: 15 Oct 2000 01:11:46 GMT
Has anyone got a Canon BJ-30 printer to run with ghostscript? If so, how?
In case the answer is no, does anyone know where I could lay hands on
a programmer's manual for it?
--
Peter Greenwood [EMAIL PROTECTED]
If /everyone/ used Unix/Linux, there'd be nothing to laugh at.
------------------------------
From: "Carl S. Isgro" <[EMAIL PROTECTED]>
Subject: Re: EverGreen Spectra 400 MHz
Date: Sun, 15 Oct 2000 01:31:05 GMT
sdemers wrote:
>
> Anybody knows if Linux can be installed on a box equiped with an Evergreen
> Spectra 400 Mhz processor? I'm thinking of upgrading but I can't seem to
> find if this would work under Linux.
>
> Thanks
I have that processor running 24/7 for over two months in one of my
machines. It is an AMD and is pretty peppy.
------------------------------
From: Gary Sandine <[EMAIL PROTECTED]>
Subject: Re: ati rage PRO compatibility
Date: Sun, 15 Oct 2000 01:38:05 GMT
Ben Goble <[EMAIL PROTECTED]> wrote:
> I am running RedHat ver 7.0 which has XFree 4.01 and it does not
> work with my ATI Rage Fury Pro 128....
We sell Linux boxes with ATI Rage Fury Pro 128 chipset video cards
(ATI Xpert2000 Pro) - X works fine with Red Hat 7.0 using the
SVGA server. I recommend trying to use XF86Setup (you will need
to have VGA16 X server installed). Be careful with your video timings!
http://www.lanm-pc.com (Cheap Linux boxes)
------------------------------
From: Gary Sandine <[EMAIL PROTECTED]>
Subject: Re: XFree86 4.0.1/nvidia driver Modeline rejection problem
Date: Sun, 15 Oct 2000 01:41:51 GMT
Cameron Miller <[EMAIL PROTECTED]> wrote:
> Sounds like I just wait until some versions get upgraded (nVidia/XFree)
> and give it another shot some other time.
We sell Linux boxes with nVidia RIVA TNT2 M64 chipset video cards
(PowerColor Sniper2), and they work "out of the box" using "XFree86"
X server. I recommend using XF86Setup to get things going (you need
to have the VGA16 server installed to use this program).
http://www.lanm-pc.com (Cheap Linux boxes)
------------------------------
Date: Sat, 14 Oct 2000 20:55:10 -0500
From: Lou Abney <[EMAIL PROTECTED]>
Crossposted-To: rec.video.desktop,comp.os.linux.misc
Subject: Re: TV Tuner/Video Capture cards that support Win2K or Linux?
I bought an ATI Wonder VE and it has a bt848 chip which bttv knows.
The tuner works and the video input works after I fiddled with the module.conf
file. But no sound yet. Search www.freshmeat.net for bttv and xawtv and then
find their supported card lists.
[EMAIL PROTECTED] wrote:
> Jem Berkes <[EMAIL PROTECTED]> writes:
>
> > > If you know of any decent TV/Video Capture card that supports EITHER
> > > Win2k or Linux, please let me know. (I expect that most people would not
> > > know a card that supports both just because they do not deal with the
> > > two operating systems. So please let me know the cards that support
> > > one of them).
>
> > Check out
> > http://www.ati.com/na/pages/resource_centre/dev_rel/linux.html
>
> Stay away from ATI. The "ATI-TV Wonder" is the single worst expansion
> card I have _ever_ used. There were no Windows 2000 or NT drivers;
> the Windows 95/98 drivers were literally buggy to the point of being
> unusable; the "fixed drivers" ATI released over a year and a half
> later were actually _worse_; for some inexplicable reason, the Linux
> bt848 (or whatever) drivers don't work with the card, even though it
> actually is a bt848.
>
> That dismal experience has guaranteed that I will never, ever buy
> another ATI product. I sold the card for $50, and the only good thing
> I can say about the card is that it has pretty good resale value.
>
> --
> Eric McCoy <[EMAIL PROTECTED]>
------------------------------
From: Gary Sandine <[EMAIL PROTECTED]>
Subject: Re: ATI Rage 128 Pro & Redhat 6.2 - Help
Date: Sun, 15 Oct 2000 01:47:02 GMT
The 128 Pro and the 128 are not the same chipset. To make the
128 Pro work with XFree86 < 4.0, you must insert the line
ChipID 0x5246
in the "Device" section pertaining to your 128 Pro card - believe
it or not. I think we were running the 128 Pro with the SVGA server
(or vice versa...). Upgrading to XF86 4.0 made everything work
"out of the box". The nicest tool for exploring X configuration,
in my opinion, is XF86Setup (you need to have the VGA16 server
installed to use this program).
http://www.lanm-pc.com (Cheap Linux boxes)
------------------------------
From: "Da FaNToM" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.networking
Subject: Re: 10base2 hubs, where can I find one?
Date: Sun, 15 Oct 2000 01:59:52 GMT
Speaking from my experience of dragging Cat5 through buildings and Coax. I
would have to say that Cat5 is MUCH easier to work with as it is more
flexible and as the previous reply stated its upgradable/easily
expandable/can be more secure/ and just plain tidier than Coax ;)
B'ichela <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> My Landlord and I are talking about retrofiting all of the
> apartments in our six unit dwelling with TCP/IP and Internet access. I
> have looked at the current Modular (10baseT) config and due to the
> cost (he wants to as inexpensive as possible.) and the labor involved in
> dragging cables through pre-existing walls and the cost of the cat-5 wire
> and the required use of hubs. I would like to use the less expensive
> 10base2 system or perhaps 10base5! I was wondering if anyone knows who
> would be selling refurbished or used working 10base2 hubs? I want to
> wire each apartment to its own segment to avoid the traditional lan-crash
> if some nimmrod pulls the plugs off the computer improperly. Being I
rather
> wire a BNC than a RJ45 anyday a inexpensive source of hardware would
> be a blessing.
> If I went 10base5 where do I GET that wire? is that RG-8? if
> so where do I get the N connectors and how do I wire that as a star
> topoligy? I can get lots of PL259s and add terminators to this (I know
> that BOTH thick and thin are terminated with 50 ohm terminators. I
> really do Need to know a supplier. I also know that computers connected
> via transievers with vampire taps. WWW addresses and/or telephone
> numbers are needed.
> Now for the Linux related question. I run Slackware Linux 3.9
> here (its the last of the 2.0.x kernal releases with libc5). Again I
> don't want Libc6 (aka glibc2). I also would like to distribute the
> processing load amoung 3 computers. one for the file server, Internet
> gateway, NFS and NIS as well as FTP support. (486DX2/66
> with 20mb ram and 1.5gb of storage),This computer already is
> configured and setup this way. and has worked flawlessly for several
> years. And two similar 8mb computers that get their files via NFS from
> the big one. They only have 120mb IDE hard drives. These I want to setup
as
> terminal servers for a computer workshop. these would be also connected
> via a seperate card (10base2) to the file server to lessen the load on the
> building wide TCP/IP cables. One would have 4 port serial card. where 4
> Vt100 would be connected. the other would be mainly my workstation in the
> "core room". Can I expect a computer with 8mb of
> ram to run 4 Vt100s? I am thinking of limiting the number of agettys
> running on the console to 3 (as it is now).
>
>
>
> --
>
> B'ichela
>
------------------------------
From: John <[EMAIL PROTECTED]>
Subject: Re: looking for terabit ethernet cards for linux
Crossposted-To: comp.os.linux.networking
Date: 15 Oct 2000 09:19:12 +0800
In comp.os.linux.hardware jtnews <[EMAIL PROTECTED]> wrote:
> hello,
> I'm wondering if there are any terabit ethernet cards for linux.
> Yes, terabit, not gigabit.
While you're waiting, you can play with
1) SCSI networking - someone was asking about that on linux-scsi the other day
2) Put two Gb NICs in both boxes, configure Linux to hande them as one.
--
------------------------------
From: "FreeX" <[EMAIL PROTECTED]>
Subject: Billion PCI ISDN CARD causes system-halt when driver loaded.
Date: Sun, 15 Oct 2000 10:08:20 +0800
I'm using the HiSax common driver for it, but the system halted
when the driver being loaded, and I have to reset the system
then.
I'm doing the test refering to the guide provide from
http://www.billion.com.tw , anybody succeeds in doing that?
------------------------------
From: "Paul Kuliniewicz" <[EMAIL PROTECTED]>
Subject: Re: Problems with SB Live!
Date: Sat, 14 Oct 2000 21:15:14 -0500
> Hi I have a SBLive!, so i recommend the Alsa player, work better and
> sound quality, se at the url : www.alsa-project.org download the drivers
> libs and utils , compile and install first the drivers, libs..... so, in
the file
> README and INSTALL it will explain you how to do, makes the steps
> there described and WOW it works!
>
> PS.: The ALSA drivers are compatible with the OSS, that mean that the
> programs compiled for OSS will work with these, one thing you must do,
> enable sound in your kernel, and only enable soundcard compatible
> OSS as module nothing more, dont select some cards only mark as mo
> dule the compatible OSS.
>
> For more info or explanation, here I am
You asked for it. <g>
I downloaded the ALSA drivers and compiled them as per the instructions on
the web site. However, when I try to load the modules, I get this:
[root@holly /sbin]# ./modprobe snd-card-sb16
/lib/modules/2.2.16-22/misc/snd-card-sb16.o: init_module: Device or
resource busy
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.2.16-22/misc/snd-card-sb16.o: insmod
/lib/modules/2.2.16-22/misc/snd-card-sb16.o failed
/lib/modules/2.2.16-22/misc/snd-card-sb16.o: insmod snd-card-sb16 failed
[root@holly /sbin]# ./lsmod
Module Size Used by
ide-cd 23628 0 (autoclean)
3c90x 22224 1 (autoclean)
nls_cp437 3876 4 (autoclean)
vfat 9404 2 (autoclean)
fat 30688 2 (autoclean) [vfat]
usb-uhci 19052 0 (unused)
usbcore 42088 1 [usb-uhci]
It complains that init_module is busy, but I don't see what would be using
it. Is there a different (better or correct) way to load the ALSA driver
module?
(In case it matters, when make-ing the ALSA drivers, the makefile spit out a
*lot* of warnings, although it finished with a success message. Neither the
lib nor utils makefiles did this. Could this be a part of the problem?
I've got Red Hat 7.0 and whatever version of gcc comes with it.)
------------------------------
From: John <[EMAIL PROTECTED]>
Subject: Re: Which distribution?
Date: 15 Oct 2000 09:37:49 +0800
Gary Atkinson <[EMAIL PROTECTED]> wrote:
> I have an old 486 machine with a small (230mb) hard drive that I want to use
> as a firewall on my network. Could anyone suggest which is the best
> distribution for an older PC like this?
First, try whatever you have already. Doa custom install, install as little as
it will let you.
I think you should go for a recent distro so you pickup the numerous bugfixes
incorporated in the latest releases.
I presume you have another system where you can compile kernels?
You should use 2.2.17; configure the firewall with ipchains.
Of course, you do not HAVE to use any distro; I recently makde a recovery
system on a MO disk by copying files onto it from a running RHL 6.2 system.
Once I had it bootable, I booted and then ran various programs to ensure the
worked and could read tapes. The whole system occupies 29 Mbytes.
Here are the files:
/misc/mo/boot/initrd-2.2.16-3.img
/misc/mo/boot/kernel.h-2.2.16
/misc/mo/boot/module-info-2.2.16-3
/misc/mo/boot/System.map-2.2.16-3
/misc/mo/boot/vmlinux-2.2.16-3
/misc/mo/boot/vmlinuz-2.2.16-3
/misc/mo/boot/boot.b
/misc/mo/boot/boot.0800
/misc/mo/boot/map
/misc/mo/lib/modules/2.2.16-3/block/loop.o
/misc/mo/lib/modules/2.2.16-3/net/ppp.o
/misc/mo/lib/modules/2.2.16-3/net/syncppp.o
/misc/mo/lib/modules/2.2.16-3/net/slhc.o
/misc/mo/lib/modules/2.2.16-3/net/ppp_deflate.o
/misc/mo/lib/modules/2.2.16-3/net/8390.o
/misc/mo/lib/modules/2.2.16-3/net/shaper.o
/misc/mo/lib/modules/2.2.16-3/net/ne.o
/misc/mo/lib/modules/2.2.16-3/net/bsd_comp.o
/misc/mo/lib/modules/2.2.16-3/net/dummy.o
/misc/mo/lib/modules/2.2.16-3/net/pcnet32.o
/misc/mo/lib/modules/2.2.16-3/net/rtl8139.o
/misc/mo/lib/modules/2.2.16-3/net/ac3200.o
/misc/mo/lib/modules/2.2.16-3/net/tulip.o
/misc/mo/lib/modules/2.2.16-3/net/epic100.o
/misc/mo/lib/modules/2.2.16-3/net/hdlc.o
/misc/mo/lib/modules/2.2.16-3/net/n2.o
/misc/mo/lib/modules/2.2.16-3/net/wanxl.o
/misc/mo/lib/modules/2.2.16-3/net/82596.o
/misc/mo/lib/modules/2.2.16-3/net/sdla.o
/misc/mo/lib/modules/2.2.16-3/net/dlci.o
/misc/mo/lib/modules/2.2.16-3/net/cs89x0.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ipip.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_gre.o
/misc/mo/lib/modules/2.2.16-3/ipv4/rarp.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_autofw.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_portfw.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_mfw.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_vs_rr.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_vs_wrr.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_vs_lc.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_vs_wlc.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_user.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_ftp.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_irc.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_raudio.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_quake.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_vdolive.o
/misc/mo/lib/modules/2.2.16-3/ipv4/ip_masq_cuseeme.o
/misc/mo/lib/modules/2.2.16-3/scsi/sg.o
/misc/mo/lib/modules/2.2.16-3/scsi/ppa.o
/misc/mo/lib/modules/2.2.16-3/scsi/tmscsim.o
/misc/mo/lib/modules/2.2.16-3/fs/fat.o
/misc/mo/lib/modules/2.2.16-3/fs/msdos.o
/misc/mo/lib/modules/2.2.16-3/fs/vfat.o
/misc/mo/lib/modules/2.2.16-3/fs/isofs.o
/misc/mo/lib/modules/2.2.16-3/fs/umsdos.o
/misc/mo/lib/modules/2.2.16-3/fs/sysv.o
/misc/mo/lib/modules/2.2.16-3/fs/ufs.o
/misc/mo/lib/modules/2.2.16-3/fs/autofs.o
/misc/mo/lib/modules/2.2.16-3/fs/binfmt_misc.o
/misc/mo/lib/modules/2.2.16-3/fs/nls_cp437.o
/misc/mo/lib/modules/2.2.16-3/fs/nls_cp850.o
/misc/mo/lib/modules/2.2.16-3/fs/nls_iso8859-1.o
/misc/mo/lib/modules/2.2.16-3/cdrom/aztcd.o
/misc/mo/lib/modules/2.2.16-3/cdrom/cdu31a.o
/misc/mo/lib/modules/2.2.16-3/cdrom/cm206.o
/misc/mo/lib/modules/2.2.16-3/cdrom/gscd.o
/misc/mo/lib/modules/2.2.16-3/cdrom/isp16.o
/misc/mo/lib/modules/2.2.16-3/cdrom/mcd.o
/misc/mo/lib/modules/2.2.16-3/cdrom/mcdx.o
/misc/mo/lib/modules/2.2.16-3/cdrom/optcd.o
/misc/mo/lib/modules/2.2.16-3/cdrom/sbpcd.o
/misc/mo/lib/modules/2.2.16-3/cdrom/sjcd.o
/misc/mo/lib/modules/2.2.16-3/cdrom/sonycd535.o
/misc/mo/lib/modules/2.2.16-3/modules.dep
/misc/mo/lib/modules/2.2.16-3/misc/agpgart.o
/misc/mo/lib/modules/2.2.16-3/misc/lp.o
/misc/mo/lib/modules/2.2.16-3/misc/parport.o
/misc/mo/lib/modules/2.2.16-3/misc/parport_pc.o
/misc/mo/lib/modules/2.2.16-3/misc/parport_probe.o
/misc/mo/lib/modules/2.2.16-3/modules.pcimap
/misc/mo/lib/ld.so
/misc/mo/lib/ld-2.1.3.so
/misc/mo/lib/libc-2.1.3.so
/misc/mo/lib/libcom_err.so.2
/misc/mo/lib/libcom_err.so.2.0
/misc/mo/lib/libcrypt-2.1.3.so
/misc/mo/lib/libcrypt.so.1
/misc/mo/lib/libc.so.6
/misc/mo/lib/libtermcap.so.2
/misc/mo/lib/libdl.so.2
/misc/mo/lib/ld-linux.so.2
/misc/mo/lib/libpam_misc.a
/misc/mo/lib/libpam_misc.so
/misc/mo/lib/libpam_misc.so.0
/misc/mo/lib/libpam_misc.so.0.72
/misc/mo/lib/libpam.so
/misc/mo/lib/libpam.so.0
/misc/mo/lib/libpam.so.0.72
/misc/mo/lib/security/pam_access.so
/misc/mo/lib/security/pam_console.so
/misc/mo/lib/security/pam_cracklib.so
/misc/mo/lib/security/pam_deny.so
/misc/mo/lib/security/pam_env.so
/misc/mo/lib/security/pam_filter.so
/misc/mo/lib/security/pam_ftp.so
/misc/mo/lib/security/pam_group.so
/misc/mo/lib/security/pam_issue.so
/misc/mo/lib/security/pam_lastlog.so
/misc/mo/lib/security/pam_limits.so
/misc/mo/lib/security/pam_listfile.so
/misc/mo/lib/security/pam_localuser.so
/misc/mo/lib/security/pam_mail.so
/misc/mo/lib/security/pam_mkhomedir.so
/misc/mo/lib/security/pam_motd.so
/misc/mo/lib/security/pam_nologin.so
/misc/mo/lib/security/pam_permit.so
/misc/mo/lib/security/pam_pwdb.so
/misc/mo/lib/security/pam_radius.so
/misc/mo/lib/security/pam_rhosts_auth.so
/misc/mo/lib/security/pam_rootok.so
/misc/mo/lib/security/pam_securetty.so
/misc/mo/lib/security/pam_shells.so
/misc/mo/lib/security/pam_stack.so
/misc/mo/lib/security/pam_stress.so
/misc/mo/lib/security/pam_tally.so
/misc/mo/lib/security/pam_time.so
/misc/mo/lib/security/pam_unix_acct.so
/misc/mo/lib/security/pam_unix_auth.so
/misc/mo/lib/security/pam_unix_passwd.so
/misc/mo/lib/security/pam_unix_session.so
/misc/mo/lib/security/pam_unix.so
/misc/mo/lib/security/pam_userdb.so
/misc/mo/lib/security/pam_warn.so
/misc/mo/lib/security/pam_wheel.so
/misc/mo/lib/security/pam_xauth.so
/misc/mo/lib/libnsl.so.1
/misc/mo/lib/libm.so.6
/misc/mo/lib/libext2fs.so.2
/misc/mo/lib/libe2p.so.2
/misc/mo/lib/libuuid.so.1
/misc/mo/lib/libproc.so.2.0.6
/misc/mo/lib/libpthread.so.0
/misc/mo/lib/libresolv.so.2
/misc/mo/lib/libnsl-2.1.3.so
/misc/mo/lib/libnss1_compat-2.1.3.so
/misc/mo/lib/libnss1_compat.so.1
/misc/mo/lib/libnss1_db-2.1.3.so
/misc/mo/lib/libnss1_db.so.1
/misc/mo/lib/libnss1_dns-2.1.3.so
/misc/mo/lib/libnss1_dns.so.1
/misc/mo/lib/libnss1_files-2.1.3.so
/misc/mo/lib/libnss1_files.so.1
/misc/mo/lib/libnss1_nis-2.1.3.so
/misc/mo/lib/libnss1_nis.so.1
/misc/mo/lib/libnss_compat-2.1.3.so
/misc/mo/lib/libnss_compat.so.1
/misc/mo/lib/libnss_compat.so.2
/misc/mo/lib/libnss_db-2.1.3.so
/misc/mo/lib/libnss_db.so.1
/misc/mo/lib/libnss_db.so.2
/misc/mo/lib/libnss_dns-2.1.3.so
/misc/mo/lib/libnss_dns.so.1
/misc/mo/lib/libnss_dns.so.2
/misc/mo/lib/libnss_files-2.1.3.so
/misc/mo/lib/libnss_files.so.1
/misc/mo/lib/libnss_files.so.2
/misc/mo/lib/libnss_hesiod-2.1.3.so
/misc/mo/lib/libnss_hesiod.so.2
/misc/mo/lib/libnss_nis-2.1.3.so
/misc/mo/lib/libnss_nis.so.1
/misc/mo/lib/libnss_nis.so.2
/misc/mo/lib/libnss_nisplus-2.1.3.so
/misc/mo/lib/libnss_nisplus.so.2
/misc/mo/etc/inittab
/misc/mo/etc/lilo.conf
/misc/mo/etc/ld.so.conf
/misc/mo/etc/modules.conf
/misc/mo/etc/fstab
/misc/mo/etc/passwd
/misc/mo/etc/shadow
/misc/mo/etc/pam.d/other
/misc/mo/etc/pam.d/su
/misc/mo/etc/pam.d/gdm
/misc/mo/etc/pam.d/passwd
/misc/mo/etc/pam.d/ppp
/misc/mo/etc/pam.d/rp3-config
/misc/mo/etc/pam.d/halt
/misc/mo/etc/pam.d/poweroff
/misc/mo/etc/pam.d/reboot
/misc/mo/etc/pam.d/ftp
/misc/mo/etc/pam.d/chfn
/misc/mo/etc/pam.d/chsh
/misc/mo/etc/pam.d/kbdrate
/misc/mo/etc/pam.d/login
/misc/mo/etc/pam.d/system-auth
/misc/mo/etc/termcap
/misc/mo/etc/nsswitch.conf
/misc/mo/etc/profile
/misc/mo/etc/ld.so.cache
/misc/mo/etc/mtab
/misc/mo/etc/issue
/misc/mo/etc/ioctl.save
/misc/mo/etc/inputrc
/misc/mo/etc/syslog.conf
/misc/mo/etc/services
/misc/mo/etc/nsswitch.conf.old
/misc/mo/etc/resolv.conf
/misc/mo/etc/hosts
/misc/mo/etc/securetty
/misc/mo/etc/mime-magic
/misc/mo/etc/mime-magic.dat
/misc/mo/bin/tar
/misc/mo/bin/gzip
/misc/mo/bin/bash
/misc/mo/bin/ash.static
/misc/mo/bin/sync
/misc/mo/bin/mount
/misc/mo/bin/umount
/misc/mo/bin/chmod
/misc/mo/bin/chown
/misc/mo/bin/mkdir
/misc/mo/bin/df
/misc/mo/bin/dd
/misc/mo/bin/cpio
/misc/mo/bin/mv
/misc/mo/bin/sh
/misc/mo/bin/cp
/misc/mo/bin/cat
/misc/mo/bin/ex
/misc/mo/bin/rvi
/misc/mo/bin/rview
/misc/mo/bin/vi
/misc/mo/bin/view
/misc/mo/bin/mt
/misc/mo/bin/ls
/misc/mo/bin/hostname
/misc/mo/bin/uname
/misc/mo/bin/rm
/misc/mo/bin/rmdir
/misc/mo/bin/ln
/misc/mo/bin/gawk
/misc/mo/bin/dmesg
/misc/mo/bin/less
/misc/mo/bin/grep
/misc/mo/bin/ps
/misc/mo/bin/login
/misc/mo/bin/touch
/misc/mo/bin/sed
/misc/mo/bin/ed
/misc/mo/bin/gunzip
/misc/mo/bin/loadkeys
/misc/mo/bin/mktemp
/misc/mo/bin/ping
/misc/mo/bin/more
/misc/mo/sbin/depmod
/misc/mo/sbin/genksyms
/misc/mo/sbin/insmod
/misc/mo/sbin/insmod_ksymoops_clean
/misc/mo/sbin/insmod.static
/misc/mo/sbin/kallsyms
/misc/mo/sbin/kernelversion
/misc/mo/sbin/ksyms
/misc/mo/sbin/lsmod
/misc/mo/sbin/modprobe
/misc/mo/sbin/modinfo
/misc/mo/sbin/rmmod
/misc/mo/sbin/e2fsck
/misc/mo/sbin/e2label
/misc/mo/sbin/ldconfig
/misc/mo/sbin/lilo
/misc/mo/sbin/shutdown
/misc/mo/sbin/reboot
/misc/mo/sbin/halt
/misc/mo/sbin/cfdisk
/misc/mo/sbin/fdisk
/misc/mo/sbin/mkbootdisk
/misc/mo/sbin/sfdisk
/misc/mo/sbin/dumpe2fs
/misc/mo/sbin/mke2fs
/misc/mo/sbin/tune2fs
/misc/mo/sbin/losetup
/misc/mo/sbin/telinit
/misc/mo/sbin/mingetty
/misc/mo/sbin/init
/misc/mo/sbin/syslogd
/misc/mo/sbin/klogd
/misc/mo/sbin/ifconfig
/misc/mo/sbin/hdparm
/misc/mo/sbin/route
/misc/mo/usr/bin/cut
/misc/mo/usr/bin/id
/misc/mo/usr/bin/head
/misc/mo/usr/bin/tail
/misc/mo/usr/bin/find
/misc/mo/usr/bin/vim
/misc/mo/usr/bin/strings
/misc/mo/usr/bin/mesg
/misc/mo/usr/bin/file
/misc/mo/usr/bin/host
/misc/mo/usr/bin/afio
/misc/mo/usr/sbin/gpm
/misc/mo/usr/sbin/chroot
/misc/mo/usr/sbin/killall
/misc/mo/usr/sbin/lsof
/misc/mo/usr/lib/libncurses.so.4
/misc/mo/usr/lib/libgpm.so.1
/misc/mo/usr/lib/libbfd-2.9.5.0.22.so
/misc/mo/usr/share/magic
/misc/mo/usr/man/man1/afio.1
/misc/mo/dev/MAKEDEV
/misc/mo/tmp/bootdisk
/misc/mo/var/log/secure
/misc/mo/var/log/boot.log
/misc/mo/var/log/messages
/misc/mo/var/run/syslogd.pid
/misc/mo/var/run/utmp.
/misc/mo/var/run/gpmF7Bifv
/misc/mo/var/run/gpmorioyA
/misc/mo/var/run/gpm.pid
/misc/mo/var/run/klogd.pid
/misc/mo/var/utmp
/misc/mo/.bash_history
/misc/mo/.bash_logout
/misc/mo/.bash_profile
/misc/mo/.bashrc
/misc/mo/root/.bash_history
/misc/mo/root/bin/stop
/misc/mo/root/bin/rc
You will want to add logging and maybe nfs client (so you can get files from
the network). I suggest installing the drive in another machine until it works;
you will need to adjust its fstab (unless you use labelled partitions) when you
put it in its final place.
--
------------------------------
From: Casey Henderson <[EMAIL PROTECTED]>
Subject: Help setting up printer.
Date: Sat, 14 Oct 2000 22:41:21 -0400
Hello all,
I'm a new Debian user. I switched to Debian after having used Redhat
for a long time. I love Debian so far,
but I am having a lot of trouble setting up my printer. I have an HP
Deskjet 710C. In Redhat, I was able to use the printtool
and the rhs-filters to set up the printer. I just used printtool to add
the printer, selected the Deskjet 710 filter, and everything worked
great. But I'm having trouble doing this in Debian. I downloaded and
installed the printtool (did an apt-get install printtool), and it said
that
/dev/lp0 was detected. I chose the filter for HP Deskjet 710 (same as
I did in) RedHat. But when I tried to print a test page, nothing
happened. I checked the bootup messages using dmesg, and it containted
the following lines
parport0: PC-style at 0x378 [SPP,PS2]
parport_probe: succeeded
parport0: Printer, HEWLETT-PACKARD DESKJET 710C
lp0: using parport0 (polling).ppa: Version 2.03 (for Linux 2.2.x)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Found device at ID 6, Attempting to use PS/2
ppa: Communication established with ID 6 using PS/2
This would seem to indicate that the parallel port modules is being
loaded. I also did a
modprobe -la | more
and found the lp.0 module listed. Also, my printer is connected to a
zip drive which is connected to the parallel port
and the zip drive works fine. Has anybody gotten this printer to work
under Debian, and if so, could you help me out? Thanks.
Casey
------------------------------
From: [EMAIL PROTECTED] (Igor)
Crossposted-To: rec.video.desktop,comp.os.linux.misc
Subject: Re: TV Tuner/Video Capture cards that support Win2K or Linux?
Date: 15 Oct 2000 02:56:56 GMT
Reply-To: [EMAIL PROTECTED]
Thanks. Sounds like the Happauge WinTV card is the winner.
igor
Lou Abney <[EMAIL PROTECTED]> wrote:
* I bought an ATI Wonder VE and it has a bt848 chip which bttv knows.
* The tuner works and the video input works after I fiddled with the module.conf
* file. But no sound yet. Search www.freshmeat.net for bttv and xawtv and then
* find their supported card lists.
*
* [EMAIL PROTECTED] wrote:
*
* > Jem Berkes <[EMAIL PROTECTED]> writes:
* >
* > > > If you know of any decent TV/Video Capture card that supports EITHER
* > > > Win2k or Linux, please let me know. (I expect that most people would not
* > > > know a card that supports both just because they do not deal with the
* > > > two operating systems. So please let me know the cards that support
* > > > one of them).
* >
* > > Check out
* > > http://www.ati.com/na/pages/resource_centre/dev_rel/linux.html
* >
* > Stay away from ATI. The "ATI-TV Wonder" is the single worst expansion
* > card I have _ever_ used. There were no Windows 2000 or NT drivers;
* > the Windows 95/98 drivers were literally buggy to the point of being
* > unusable; the "fixed drivers" ATI released over a year and a half
* > later were actually _worse_; for some inexplicable reason, the Linux
* > bt848 (or whatever) drivers don't work with the card, even though it
* > actually is a bt848.
* >
* > That dismal experience has guaranteed that I will never, ever buy
* > another ATI product. I sold the card for $50, and the only good thing
* > I can say about the card is that it has pretty good resale value.
* >
* > --
* > Eric McCoy <[EMAIL PROTECTED]>
*
--
***********************************************************************
Do your algebra homework at http://www.algebra.com
Solve: x^2+4x+3=0 Plot: y=3*sin(x^2) Ask Questions Word Problems
http://www.algebra.com
***********************************************************************
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
