Linux-Hardware Digest #180, Volume #14 Mon, 15 Jan 01 06:13:04 EST
Contents:
Re: no joysticks in kernel 2.4.0 (Dances With Crows)
allocating more RAM to Graphics (Jeff Strunk)
can't get hard drive to work ([EMAIL PROTECTED])
Logitec Trackman Marble FX (Keith Dombrowski)
aha-1522a scsi host timeouts ("Corey Wirun")
Setting up my CDWriter ("Quintin Roux")
Re: Modem is "busy" - PCI IRQ Sharing problem - SOLVED!!! (Nader)
Printer Not Working ("mpierce")
Re: Linux on ABIT BX133-RAID motherboard (Geoff)
Re: Setting up my CDWriter ("mpierce")
Re: SB Live IRQ problem (Chris Elvidge)
Re: Setting up my CDWriter (Sven Bovin)
Re: no sound or network, need higher resolution ([EMAIL PROTECTED])
QIC-80 (Marcus Greferath)
Compaq Proliant/Embedded SCSI controller ("Kristofor Jacobson")
Re: SB Live IRQ problem (Craig Barel)
----------------------------------------------------------------------------
From: [EMAIL PROTECTED] (Dances With Crows)
Crossposted-To: comp.os.linux.setup,comp.os.linux
Subject: Re: no joysticks in kernel 2.4.0
Date: 15 Jan 2001 05:12:52 GMT
Reply-To: [EMAIL PROTECTED]
On Mon, 15 Jan 2001 00:25:47 +0000, ken pile staggered into the Black
Sun and said:
>I have downloaded kernel 2.4.0 for one reason, for the joystick support
>on the soundblaster live! soundcard. However, when I came to select the
>joystick in xconfig, they were all blanked out. Can anyone guide me on
>this please?
Read the documentation, perhaps? You need to enable another couple of
options to get joystick support working. "Input core support" and
"Joystick Support" under that need to be Y or M, then the Character
Devices->ns558 gameports option needs to be selected. Make sure you
also enable support for the specific joystick model you have, and take
note of the name changes/module loading order differences. Funny, when
I ran "make menuconfig", there was a screen somewhere that told me what
I needed to do about that.
Some typos seem to have crept into the documentation as well. Joysticks
have major number 15, not 13 as several places in the docs say! (Info
from /usr/src/linux-2.4.0/include/linux/major.h )
--
Matt G|There is no Darkness in Eternity/But only Light too dim for us to see
Brainbench MVP for Linux Admin / Workin' in a code mine, hittin' Ctrl-Alt
http://www.brainbench.com / Workin' in a code mine, whoops!
=============================/ I hit a seg fault....
------------------------------
Subject: allocating more RAM to Graphics
From: Jeff Strunk <[EMAIL PROTECTED]>
Date: 14 Jan 2001 23:28:33 -0600
I am pretty sure this is would be a stupid(more like useless) thank to do, but
how would one go about allocating some of the systems memory to the graphics
card or some other peripheral?
What gave me this idea is that some PCs have on board graphics controllers that
use a portion of the main RAM. I was thinking that perhaps i could allocate
more RAM to my graphics card and have better graphics.
Just an idea,
Jeff
------------------------------
From: [EMAIL PROTECTED]
Subject: can't get hard drive to work
Date: Mon, 15 Jan 2001 05:28:55 GMT
I just bought a second hard drive (SEAGATE X15, 18GB). I installed it
into computer, no problem. It is a SCSI drive. The adaptec BIOS sees
drive during boot up. But, when the linux OS is ready to boot, it just
stops after the kernel is loaded. It doesn't even start the boot up
process.
I know that Lilo is working at some level because I can startup windows
which is stored on a 2nd partition on the bootup hard drive. Furthermore
because windows can start and read/examine the drive, I know that the
problem must be on the linux side.
The boot drive is at SCSI 0, and the new 2nd drive is at SCSI 1. there
are not SCSI ID conflicts. I have checked all that.
Can anyone provide any assistance?
Here is my lilo.conf file:
#
# /etc/lilo.conf - generated by Lizard
#
# target
boot = /dev/sda2
install = /boot/boot.b
# options
prompt
delay = 50
timeout = 50
message = /boot/message
default = linux
image = /boot/vmlinuz-pc97-2.2.10-modular
label = linux
root = /dev/sda2
vga = 274
read-only
append = "debug=2 noapic nosmp"
initrd = /boot/initrd-2.2.10.gz
image = /boot/vmlinuz-pc97-2.2.10-modular
label = linux2
root = /dev/sda2
vga = 274
read-only
append = "hdc=ide-scsi"
append = "debug=2 noapic nosmp"
initrd = /boot/initrd-2.2.10.gz
image = /boot/vmlinuzJ
label = cruft4296
root = /dev/sda2
vga = 274
read-only
append = "debug=2 noapic nosmp"
initrd = /boot/initrd-2.2.10.gz
other = /dev/sda1
label = windowsNT
table = /dev/sda
Sent via Deja.com
http://www.deja.com/
------------------------------
From: [EMAIL PROTECTED] (Keith Dombrowski)
Subject: Logitec Trackman Marble FX
Date: Mon, 15 Jan 2001 05:50:42 GMT
Has anybody gotten a Logitec Trackman Marble FX for work under Red Hat
7 (Kernel 2.2.18, PS/2 mouse support compiled in)? X-windows just
doesn't seem to recognize that mine is even there, no matter what
settings I choose.
Keith
------------------------------
From: "Corey Wirun" <[EMAIL PROTECTED]>
Subject: aha-1522a scsi host timeouts
Date: Wed, 10 Jan 2001 09:33:47 -0700
Hi All,
I've got an AHA-1522a SCSI card in my RH6.2 box. When the card is in there
by itself,
I can successfully 'modprobe' the aha152x module and it loads okay. But,
when I added a
QIC tape drive (scsi id#1), I get the following.
Using /lib/modules/2.2.16-21/scsi/aha152x.o
aha152x: detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x140, IRQ=11, SCSI ID=7, reconnect=enabled,
parity=enabled, synchronous=disabled, delay=100, extende
d translation=disabled
aha152x: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi : 1 host.
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun0
Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun0
Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun0
Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 1, lun0
Test Unit Ready 00 00 00 00 00
scsi : aborting command due to timeout : pid 3, scsi0, channel 0, id 3, lun0
Test Unit Ready 00 00 00 00 00
etc, etc...
I got exactly the same symptoms when I used an old aha-1510a, thats
why I thought I would try the 1522a.
If anyone get point me to where the problem is, that would be appreciated.
Thanks in Advance!
Corey.
------------------------------
From: "Quintin Roux" <[EMAIL PROTECTED]>
Subject: Setting up my CDWriter
Date: Mon, 15 Jan 2001 08:49:44 +0200
Corel Linux 1st Edition
I Have an HP 8250i IDE CD-Writer. When linux boots up it detects my
CD-WRiter as a CDROM. I need to set it up so that Linux knows it is a
CD-Writer as well?
(Wishing to use cdwrite, cdrecord) on this machine but each time it displays
that /dev/hdd (on which my cdwriter is connected) is read-only. How do I
resolve this?
Thanks,
Quintin Roux
------------------------------
From: Nader <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.setup
Subject: Re: Modem is "busy" - PCI IRQ Sharing problem - SOLVED!!!
Date: Sun, 14 Jan 2001 23:07:31 -0800
Thanks to your advice, Julie, my problem has finally been solved. I've
learned a lot along the way (e.g., building kernels), but am glad that I
can move on to other things.
What worked for me was to patch 2.2.16 with the HPT366 update (uses
ide.c version 6.30) and serial 5.05. Now I can also boot directly from
my UDMA66 HD!!!
Nader
Nader wrote:
> Here's a shout! 2.2.18 has been built.
>
> Julie Brandon wrote:
>
>> On Tue, 02 Jan 2001 19:43:28 -0800, Nader ([EMAIL PROTECTED])
>> said:
>>
>>> What kernel version did you use?
>>
>>
>>
>> v2.2.17 & v2.2.18
>>
>> (serial v5.05 needs a very tiny patch to compile on v2.2.18, give me a
>> shout
>> if you want the patch)
------------------------------
From: "mpierce" <[EMAIL PROTECTED]>
Subject: Printer Not Working
Date: Mon, 15 Jan 2001 07:24:33 GMT
System Mandrake 7.2, kernel 2.4.0, cups1.1.4-7.1
Printer is not printing because the kernel is not ready
[mpierce@localhost mpierce]$ /usr/sbin/lpc status
lp:
printer is on device 'parallel' speed -1
queuing is disabled
printing is disabled
no entries
daemon present
[mpierce@localhost mpierce]$
Does anyone know how to make the daemon restart?
Marvin
------------------------------
From: Geoff <[EMAIL PROTECTED]>
Subject: Re: Linux on ABIT BX133-RAID motherboard
Date: Mon, 15 Jan 2001 18:56:51 +1100
ABIT are a funny lot. I have the BE6II-v1.2 which is not promoted as a
raid board. However the only apparent difference between this board and
the
BE6II-v2 is the bios as people are flashing their v1.2's with the bios
for the v2 and running raid on them. Haven't tried it yet.
Be interested to know how you go with 2.2.18, if you go ahead with it.
[EMAIL PROTECTED] wrote:
>
> I've been trying to setup RAID on an ABIT
> BX133-RAID motherboard-based system. The following
> are my impressions/problems with the mobo. I
> welcome hearing from other Linux users who have
> different impressions of the mobo - especially
> Linux users who may have had more success with the
> mobo than I have.
>
> If you are considering RAID, don't believe the
> ABIT or Highpoint product literature. The "RAID"
> provided by the Highpoint 370 controller on the
> BX133-RAID mobo is implemented only partially in
> hardware. The 370 controller does *not* make a
> disk array appear as a single device interface.
> Some RAID functions are performed in software!
> This means that ABIT BX133-RAID Linux users will
> have to configure Linux for software RAID in order
> to take advantage of *all* drives in each RAID
> array.
>
> Fortunately, Andre (the Linux IDE guy) produced a
> device driver that capable of *seeing* the drives
> behind the 370. I installed a patch he prepared.
> Now that Linux (2.2.18) can see the drives when I
> boot from a floppy, I can try to use the Linux
> built-in RAID level 0 and 1 driver (/dev/md) to
> setup software RAID.
>
> Doing RAID in software wouldn't bother me too much
> if ABIT did not advertise the BX133-RAID as a RAID
> motherboard which included a Gentus (Redhat) Linux
> port for the motherboard. Though Gentus Linux does
> see the RAID array, it only performs I/O with the
> *first* device in the array. Except for appearing
> in a graphical device list, all other devices in
> the array are ignored (e.g. their resources are
> ignored), making Gentus Linux no more useful
> with the BX133-RAID than any other Linux
> distribution.
>
> - Bernie
>
> Sent via Deja.com
> http://www.deja.com/
------------------------------
From: "mpierce" <[EMAIL PROTECTED]>
Subject: Re: Setting up my CDWriter
Date: Mon, 15 Jan 2001 08:23:01 GMT
Whether or not you can do this depends on the kernel you are using.
I've had one hell of a time doing exactly what you want to do with an HP
CDRW 8210e. It can be done but you will need a 2.4.0 kernel and you'll
have to compile in support to do this and then, install usbmgr.
If you want to do it, drop me an email and I'll post you how I did it.
Marvin
In article <3a629d40$0$[EMAIL PROTECTED]>, "Quintin Roux"
<[EMAIL PROTECTED]> wrote:
> Corel Linux 1st Edition
>
> I Have an HP 8250i IDE CD-Writer. When linux boots up it detects my
> CD-WRiter as a CDROM. I need to set it up so that Linux knows it is a
> CD-Writer as well?
>
> (Wishing to use cdwrite, cdrecord) on this machine but each time it
> displays
> that /dev/hdd (on which my cdwriter is connected) is read-only. How do I
> resolve this?
>
> Thanks, Quintin Roux
>
>
------------------------------
From: Chris Elvidge <[EMAIL PROTECTED]>
Subject: Re: SB Live IRQ problem
Date: Mon, 15 Jan 2001 12:14:59 +0400
Gareth Randall wrote:
>
> Thought:
>
> Basically, I wonder whether the IRQ usage map is different under Linux.
>
> e.g. under Windows you may have two devices sharing say IRQ 11.
> Under Linux these don't share and consume IRQ 10 before your soundcard
> comes to initialise. (Your error message is what you'd expect if this
> occurred.)
>
> Repost with contents of /proc/interrupts, /proc/ioports, and some hardware
> details and someone may be able to identify shareable devices and tell you
> how to do it.
>
> [Sorry, Netscape crashed and lost my longer first reply. Shit code ... I
> could do better myself if I only had the time...]
>
> Yours,
>
> ======= Gareth Randall =======
My box shares interrupts (11)
lintas_www!(pts):~# cat /proc/interrupts
CPU0
0: 59203277 XT-PIC timer
1: 89011 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 3635160 XT-PIC serial
11: 5096082 XT-PIC aic7xxx, es1371, TLAN, TLAN
12: 1250732 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 793294 XT-PIC ide0
15: 10988 XT-PIC ide1
NMI: 0
That's scsi, sound and two network cards.
Chris
------------------------------
From: Sven Bovin <[EMAIL PROTECTED]>
Subject: Re: Setting up my CDWriter
Date: Mon, 15 Jan 2001 09:25:33 +0100
Quintin Roux wrote:
>
> Corel Linux 1st Edition
>
> I Have an HP 8250i IDE CD-Writer. When linux boots up it detects my
> CD-WRiter as a CDROM. I need to set it up so that Linux knows it is a
> CD-Writer as well?
>
> (Wishing to use cdwrite, cdrecord) on this machine but each time it
> displays
> that /dev/hdd (on which my cdwriter is connected) is read-only. How
> do I
> resolve this?
You have to have IDE SCSI emulation enabled in your kernel.
Don't know the details (have never done it myself), but it
is explained very well in the CD-Writing-HOWTO.
HTH
Sven
--
===========================================================
sven dot bovin at chem dot kuleuven dot ac dot be
===========================================================
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: comp.os.linux.misc,comp.os.linux.setup
Subject: Re: no sound or network, need higher resolution
Date: Mon, 15 Jan 2001 08:57:05 GMT
Fu,
I recently fixed a problem I was having with both the sound card and
network card on my new linux box and you may be having the same
trouble. It could be a problem with IRQs not being assigned properly.
Take a peek at the file /proc/pci This tells you the IRQs and I/Os etc
of your pci devices. If this is the case, you are in good shape,
because you can tell whether there is an IRQ conflict or if one is being
assigned at all. If there is not one listed, it is probably not being
assigned. If this is the case, wander into the bios and look for a
setting for PnP OS support. If you have (had) Windows, this is probably
set to Yes, set it to No. Don't worry, if this is a dual boot, it won't
screw up Windows, it should work just fine, and if not, you can always
change it back. Hope this helps. If it is an IRQ conflict, here is the
page that helped me figure out the problem and fix it:
http://www.scyld.com/expert/irq-conflict.com
Jason
In article <93touj$m53$[EMAIL PROTECTED]>,
"Fu Muma" <[EMAIL PROTECTED]> wrote:
> running linux 2.2.15, redhat 6.2
>
> i'm new on the linux scene.
>
> i have a sb16 pci sound card, and a edimax ( read generic ) nic. i
can't get
> them to work.
> my monitor which can display up to1024x768 in win2k, can only display
> 640x480 in linux. i'm using a nvidia tnt2 m64 display adapter with a
komodo
> plug n play monitor.
>
> i am open to any and all suggestions. make assumptions that i did not
try
> your idea ( because i probably don't know how to : ).
>
> thanks for you help in advance.
> --
> know Jesus, know peace... no Jesus, no peace.
>
> fu
>
>
Sent via Deja.com
http://www.deja.com/
------------------------------
From: Marcus Greferath <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc
Subject: QIC-80
Date: Mon, 15 Jan 2001 10:39:47 +0100
anyone aware of where to get these old QIC-80 tapes, used or new?
i found a streamer in my collection of old stuff and would like
to play with it.
thanks in advance. marcus.
--
Marcus Greferath
Dept. of Mathematics
University of Duisburg Phone: ++49-203-379-2674
47048 Duisburg, Germany Fax: ++49-203-379-3139
cellular: ++49-179-285-3993
------------------------------
From: "Kristofor Jacobson" <[EMAIL PROTECTED]>
Subject: Compaq Proliant/Embedded SCSI controller
Date: Mon, 15 Jan 2001 02:28:20 -0800
Hello all,
I'm having problems installing RH6.0 on my Compaq Proliant 4500. The
Compaq is a 4-way Pentium 100 with an embedded SCSI fast/wide controller
that doesn't appear to be recognized by the install. I put in an older
Adaptec 1542 and cabled it to the CDROM but not the SCSI backplane (which
remained cabled to the embedded SCSI controller). Of course, now I can get
to the CDROM, but I can't get to the hard drives because they're still on
the embedded controller.
When I connect the backplane to the Adaptec controller and uncable it
from the Compaq controller, the system display's a cabling error at startup
and won't boot up. If I connect the backplane to BOTH the Adaptec and the
Compaq controller, it boots fine but then locks up when attempting to read
from the CDROM. Any advice? It would be greatly appreciated... I don't
know what I'm doing wrong. It doesn't help that I'm not familiar with
SCSI...
TIA,
Kristofor Jacobson
------------------------------
From: Craig Barel <[EMAIL PROTECTED]>
Subject: Re: SB Live IRQ problem
Date: Mon, 15 Jan 2001 20:44:48 +1000
> mmmh... when you are in terminal, type : lspci -vv
> what does it say?
> Are you sure you assigned the irq legacy to your slots in the bios?
> Btw, what motherboard do you have?
A few other people advised me to do cat /proc/pci and cat /proc/interrupts
so I am throwing it all in together here to forward to them also.
The output from cat /proc/pci was:
<snip>
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems 530 Host (rev 2).
Medium devsel. Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xf8000000 [0xf8000000].
Bus 0, device 0, function 1:
IDE interface: Silicon Integrated Systems 85C5513 IDE (rev 208).
Fast devsel. Master Capable. Latency=64.
I/O at 0x1f0 [0x1f1].
I/O at 0x3f4 [0x3f5].
I/O at 0x170 [0x171].
I/O at 0x374 [0x375].
I/O at 0x1000 [0x1001].
Bus 0, device 1, function 0:
ISA bridge: Silicon Integrated Systems 85C503 (rev 177).
Medium devsel. Master Capable. No bursts.
Bus 0, device 1, function 1:
Hot Swap Controller: Silicon Integrated Systems ACPI (rev 0).
Medium devsel.
Bus 0, device 1, function 2:
USB Controller: Silicon Integrated Systems 7001 USB (rev 17).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
Max Lat=80.
Non-prefetchable 32 bit memory at 0xfc000000 [0xfc000000].
Bus 0, device 2, function 0:
PCI bridge: Silicon Integrated Systems 5591/5592 AGP (rev 0).
Fast devsel. Master Capable. No bursts. Min Gnt=12.
Bus 0, device 11, function 0:
Multimedia audio controller: Unknown vendor Unknown device (rev 8).
Vendor id=1102. Device id=2.
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
Min Gnt=2.Max Lat=20.
I/O at 0x1020 [0x1021].
Bus 0, device 11, function 1:
Input device controller: Unknown vendor Unknown device (rev 8).
Vendor id=1102. Device id=7002.
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
I/O at 0x1010 [0x1011].
Bus 1, device 0, function 0:
VGA compatible controller: Silicon Integrated Systems 3D-AGP 6306 VGA
(rev 162).
Medium devsel. IRQ 9. Master Capable. Latency=64. Min Gnt=2.
Prefetchable 32 bit memory at 0xfc800000 [0xfc800008].
Non-prefetchable 32 bit memory at 0xfc100000 [0xfc100000].
I/O at 0x9000 [0x9001].
and the output from cat /proc/interrupts was:
<snip>
CPU0
0: 66919 XT-PIC timer
1: 326 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 2471 XT-PIC serial
8: 1 XT-PIC rtc
12: 27598 XT-PIC PS/2 Mouse
13: 0 XT-PIC fpu
14: 6403 XT-PIC ide0
15: 5 XT-PIC ide1
NMI: 0
and the output from lspci -vv was:
<snip>
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 530 Host (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at f8000000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
(prog-if 8a [Master SecP PriP])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller
(A,B step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 01f0
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170
Region 3: I/O ports at 0374
Region 4: I/O ports at 1000
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev b1)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 Class ff00: Silicon Integrated Systems [SiS] ACPI
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 11)
(prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at fc000000 (32-bit, non-prefetchable)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fc100000-fc1fffff
Prefetchable memory behind bridge: fc800000-fcffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev
08)
Subsystem: Creative Labs CT4832 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1020
Capabilities: <available only to root>
00:0b.1 Input device controller: Creative Labs SB Live! (rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 1010
Capabilities: <available only to root>
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 6306
3D-AGP
(rev a2) (prog-if 00 [VGA])
Subsystem: Silicon Integrated Systems [SiS] SiS530,620 GUI
Accelerator+3D
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fc800000 (32-bit, prefetchable)
Region 1: Memory at fc100000 (32-bit, non-prefetchable)
Region 2: I/O ports at 9000
Capabilities: <available only to root>
I don't actually know what type of motherboard I have. I didn't get a
manual about it when I bought the computer. I took a look but couldn't see
any brand logos or anything. I have written an email to hp asking them what
they gave me - who knows when/if they will reply. All I do know is that the
chipset is SiS530 if that is of any use.
As far as the bios goes I took a look (didn't touch anything!) and it
showed the following:
"hope the spacing works ok :)"
Selection Description
========= ===========
Advanced
> PCI Configuration Additional setup
menus to configure PCI devices
> PCI Device, #2 "card here" Setup items for
configuring the specific
PCI device
> Option Rom scan [Enabled] Initialize device
expansion rom
Enable Master [Disabled] Enable selected
device as a PCI bus master
Latency Timer [0040h] Minimum guaranteed
time slice allotted for bus
master in untis of
PCI bus clocks
> PCI/PNP ISA IRQ Resource exclusion Reserve specific
IRQ's for use by
legacy ISA devices
> IRQ 3: [Available]
IRQ 4: [Available]
IRQ 5: [Reserved]
IRQ 7: [Available]
IRQ 9: [Available]
IRQ 10: [Available]
IRQ 11: [Available]
Any further advice greatly appreciated,
Craig.
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list by posting to comp.os.linux.hardware.
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
