Linux-Hardware Digest #479, Volume #12 Tue, 14 Mar 00 18:13:06 EST
Contents:
Re: which cheap bubble-jet printer for linux? (Grant Taylor)
Problem with graphic card (Gemma)
Re: BIOS drive info != Linux drive info (Robie Basak)
Re: Please help (M. Buchenrieder)
Re: No printing available. ([EMAIL PROTECTED])
Weird CRC Error! ([EMAIL PROTECTED])
Re: 3-button serial mouse (James Silverton)
IDE via PCI not working (Allan Poindexter)
Re: No printing available. ([EMAIL PROTECTED])
Re: How to build a parallel port tester? ("Charles W. Shults III")
Re: sm56 isa or rockwell hcf pci modems and linux ("A-Tuin �")
ABIT BP6 [was: Re: SMP / Adaptec 2940 problems] (Dimitri Papadopoulos)
Ricoh CD-R/RW mp7060s ("Michael")
Re: 3-button serial mouse (C. Newport)
Re: linux in notebook ("maqish")
----------------------------------------------------------------------------
From: Grant Taylor <[EMAIL PROTECTED]>
Subject: Re: which cheap bubble-jet printer for linux?
Date: Tue, 14 Mar 2000 21:14:25 GMT
John Schamus <[EMAIL PROTECTED]> writes:
> A friend of mine recommended the Lexmark Optra 40 inkjet printer. It's
> postscript and Buy.com has it for $98.50 with free shipping in the
> clearance listing.
Yup, this is indeed a nice little hassle-free printer for use with
Linux; I've been recommending it for some time. It's also available
in an auction scheme at egghead.com for $79, although you pay for
shipping.
Note that you will need to add memory for it to be useful; it takes a
single 72 pin FPM or EDO SIMM. 16MB is sufficient, or you can add 32
or 64 if you've got that. This is 486-era memory, so you should be
able to find some on an old computer some somewhere.
You can find a little more information from this printers' database
entry at the Printing HOWTO home page; URL below.
--
Grant Taylor - gtaylor@picante<dot>com - http://www.picante.com/~gtaylor/
Linux Printing HOWTO: http://www.picante.com/~gtaylor/pht/
------------------------------
From: Gemma <[EMAIL PROTECTED]>
Subject: Problem with graphic card
Date: Tue, 14 Mar 2000 10:20:35 +0100
I have a very stupid problem to install Corel Linux. It doesn't accept
my graphic card inside my portable. Have anybody a tip how I can make it
working.
It is a LCD screen with a Trident display adapter. That's all I know
about it.
I hope anybody can help.
Nice greetings from
Gemma
mailto:[EMAIL PROTECTED]
------------------------------
From: [EMAIL PROTECTED] (Robie Basak)
Subject: Re: BIOS drive info != Linux drive info
Reply-To: [EMAIL PROTECTED]
Date: 15 Mar 2000 05:24:55 GMT
On Tue, 14 Mar 2000 13:05:23 GMT, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> I just bought a 20 GIG drive and am having a devil of a time getting it
>installed on my Redhat 6.1 system. I updated the BIOS for LBA support
>and it sees the drive as being 20523 kBytes, 2495 cylinders, 255 heads,
>LANDZ=39769, 63 sectors. When Redhat boots though, checking dmesg shows
>the drive is detected as:
>
>hdd: WDC WD205BA, 8063MB w/2048 kB Cache, CHS=16383/16/63.
>
>I've tried using the LILO boot prompt hack of "linux hdd=1024/16/63" as
>suggested in a USENET post, but to no avail.
>
>Any ideas would be met with much thanks,
>
>Michael Czeiszperger
>Raleigh, NC
>
>
>Sent via Deja.com http://www.deja.com/
>Before you buy.
Linux always sees the real drive geometry - unless you are dual
booting with an inferior OS (in this respect anyway), the only need
for the BIOS setting is to get LILO to boot.
I found that the easiest way to do this is to set the BIOS to any
mode (but stick to it), and create a small partition at the beginning
of the drive to mount into /boot, where I keep the kernel (the more
cylinders in the BIOS, the smaller the partition, 15M on my machine).
This way, LILO can find it, and then Linux doesn't need the BIOS
geometries any more.
Robie.
--
------------------------------
Crossposted-To: alt.linux
From: [EMAIL PROTECTED] (M. Buchenrieder)
Subject: Re: Please help
Date: Tue, 14 Mar 2000 16:59:39 GMT
"Buchacher" <[EMAIL PROTECTED]> writes:
>>Did you make a link /dev/mouse to /dev/psaux ? Most apps default to
>>using /dev/mouse which is linked to the appropriate device for your
>>system.
>I thought /dev/mouse is only used for bus-mice and mice connected to the
>serial port.
Nope. /dev/mouse is just a link to the correct device file, nothing
more. What it is actually pointing to depends from your local setup
(and skills).
>When I tried to connect my mouse to the PS/2 port I also used
>/dev/psaux in XF86Config
ln -sf /dev/psaux /dev/mouse
though there's not much sense in using it, other than for convenience
reasons.
Michael
--
Michael Buchenrieder * [EMAIL PROTECTED] * http://www.muc.de/~mibu
Lumber Cartel Unit #456 (TINLC) & Official Netscum
Note: If you want me to send you email, don't munge your address.
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: No printing available.
Date: Tue, 14 Mar 2000 21:18:44 GMT
In article <[EMAIL PROTECTED]>,
Matt Starnes <[EMAIL PROTECTED]> wrote:
> Goofy wrote:
>
> > I have tried everything that I can think of to get this stupid
printer to
> > print.
> > I currently have an ASUS P2B motherboard. I have tried to install
the
> > printer from gnome and when it does an autodetection of /dev/lp0 or
/dev/lp1
> > ....etc I get an error message saying devices not found.... I tried
doing a
> > simple print fromm the terminal .... echo "hello, world" > /dev/lp0
and got
> > an error message saying device not found.... how can I install the
printer
> > ports... printing works fine in windows.... Help please
> >
> > Goofy.
>
> Check in your kernel configuration (make menuconfig in console, or
make xconfig
> in x) and make sure you have all the relevant parallel port items
turned on,
> especially auto-probe.
>
> Matt
The same problem with my machine: ASUS P3B-F mother board, HP2100
printer working on NT but not under linux... I think that the parallel
port doesn't work well on this board. I've compiled a new kernel with
all parallel options turned on, I've tried all configs for parallel port
(Normal, EPP, ECP, EPP+ECP) but nothing. Another afternoon loosed. Any
help or hint is welcomed.
dim ([EMAIL PROTECTED])
Some context infos:
===========================
RH6.1 with updates
===========================
[root@pc-dmarinca /root]# lsmod
Module Size Used by
parport_probe 2980 0 (autoclean) (unused)
lp 5692 0 (autoclean) (unused)
parport 7060 0 (autoclean) [parport_probe lp]
lockd 31304 1 (autoclean)
sunrpc 52580 1 (autoclean) [lockd]
3c59x 18664 1 (autoclean)
nls_iso8859-1 2020 2 (autoclean)
nls_cp437 3548 2 (autoclean)
vfat 9084 2 (autoclean)
fat 30208 2 (autoclean) [vfat]
es1371 25152 0
soundcore 2404 4 [es1371]
===========================================
[root@pc-dmarinca /root]# cat fis.txt >/dev/parport0
bash: /dev/parport0: Aucun p�riph�rique de ce type
[root@pc-dmarinca /root]# cat fis.txt >/dev/parport1
bash: /dev/parport1: Aucun p�riph�rique de ce type
[root@pc-dmarinca /root]# cat fis.txt >/dev/parport2
bash: /dev/parport2: Aucun p�riph�rique de ce type
[root@pc-dmarinca /root]# cat fis.txt >/dev/lp0
bash: /dev/lp0: Aucun p�riph�rique de ce type
[root@pc-dmarinca /root]# cat fis.txt >/dev/lp1
bash: /dev/lp1: Aucun p�riph�rique de ce type
[root@pc-dmarinca /root]# cat fis.txt >/dev/lp2
bash: /dev/lp2: Aucun p�riph�rique de ce type
=====================================
[root@pc-dmarinca /root]# ls -l /dev/lp* /dev/parport*
crw-rw---- 1 root daemon 6, 0 May 5 1998 /dev/lp0
crw-rw---- 1 root daemon 6, 1 May 5 1998 /dev/lp1
crw-rw---- 1 root daemon 6, 2 May 5 1998 /dev/lp2
crw-rw---- 1 root daemon 99, 0 Apr 17 1999 /dev/parport0
crw-rw---- 1 root daemon 99, 1 Apr 17 1999 /dev/parport1
crw-rw---- 1 root daemon 99, 2 Apr 17 1999 /dev/parport2
[root@pc-dmarinca /root]#
======================================
[root@pc-dmarinca /root]# lpq
waiting for lp to become ready (offline ?)
Rank Owner Job Files Total Size
1st root 21 ... 16624 bytes
[root@pc-dmarinca /root]# lpc
lpc> status
lp:
queuing is enabled
printing is enabled
1 entry in spool area
waiting for lp to become ready (offline ?)
lpc> quit
==========================================================
Distribution : Red Hat Linux
Syst�me d'exploitation : Linux
Version de la distribution : Red Hat Linux release 6.1 (Cartman)
Version du syst�me d'exploitation : #3 mar mar 14 20:43:30 CET 2000
Sous-version du syst�me d'exploitation : 2.2.12-20
Type de processeur : i686 (PentiumIII)
=====================================
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: [EMAIL PROTECTED]
Subject: Weird CRC Error!
Date: Tue, 14 Mar 2000 21:20:33 GMT
I tried to install RedHat 6.1 on a newly bought Dell Dimension XPS
T750r. After doing the routine installation, I can boot the system with
floppy. When I boot from the hard disk(LILO), I encountered a problem of
CRC error. The attached is the message I got when booting. I don't know
which part of the hardware has problem or some configuration goes wrong.
It has bothered me for one week, can anybody help me out of this?
Thanks,
Yong
Boot msg:
=======================================================================
Linux version 2.2.12-20 ([EMAIL PROTECTED]) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Fri Mar 10 16:05:01
EST 2000
Detected 748289295 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 747.11 BogoMIPS
Memory: 516864k/524224k available (1076k kernel code, 416k reserved,
5524k data, 64k init)
DENTRY hash table entries: 262144 (order: 9, 2097152 bytes)
Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium III (Coppermine) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfd993
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.20
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:pio, hdd:DMA
PDC20262: IDE controller on PCI bus 00 dev 78
PDC20262: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x1880-0x1887, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x1888-0x188f, BIOS settings: hdg:pio, hdh:pio
hdc: SAMSUNG DVD-ROM SD-608, ATAPI CDROM drive
hdd: SONY CD-RW CRX140E, ATAPI CDROM drive
hde: IBM-DPTA-372730, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x1c38-0x1c3f,0x1c2e on irq 3
hde: IBM-DPTA-372730, 26105MB w/1961kB Cache, CHS=53040/16/63
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.56
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 1662.684 MB/sec
p5_mmx : 1746.504 MB/sec
8regs : 1285.494 MB/sec
32regs : 730.758 MB/sec
using fastest function: p5_mmx (1746.504 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hde: [PTBL] [3328/255/63] hde1 hde2 < hde5 hde6 hde7 hde8 hde9 >
RAMDISK: Compressed image found at block 0
**************************************************
*crc error<6>autodetecting RAID arrays *
**************************************************
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 64k freed
Adding Swap: 136512k swap-space (priority -1)
Welcome to Red Hat linux
......
****************************************************
*Checking root filesystem *
* /dev/hde1 is mounted. Cannot continue, aborting.*
****************************************************
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: James Silverton <[EMAIL PROTECTED]>
Crossposted-To: uk.comp.os.linux
Subject: Re: 3-button serial mouse
Date: Tue, 14 Mar 2000 16:44:54 -0500
Jonathan Buzzard wrote:
>
> In article <[EMAIL PROTECTED]>,
> Simon Brooke <[EMAIL PROTECTED]> writes:
>
> [SNIP]
> >
> > The mice themselves were solidly made, comfortable in the hand, had
> > nice, big buttons, and just worked - I didn't get interested in mouse
> > quality until I moved onto things like Suns and PCs with inferior
> > mice. But a good optical mouse beats a good mechanical mouse any day.
>
> I can't avoid butting in here. You have obviously *never* used a mouse
> that uses the Honeywell motion sensing mechanism. To anyone who has
> they are simply the best way of sensing the motion of a mouse and it's
> mechanical. They don't need a mouse mat and never need cleaning. One day
> when the patent runs out all mice will be made like this.
>
> Basically they method is to use two axially inclined disks. These are
> sealed so no dirt can get inside. The only maintanence is to occasionaly
> scrape the muck of the glide pads and disks (refered to as feet).
>
> It would appear that Honeywell have sold the patent on to KeyTronic
> and is avaliable as the LifeTime mouse in North America or the KT Mouse
> in Europe. For details see
It may be heresy to mention it but Microsoft makes an optical mouse
without rollers that works very well. It has a scroll wheel and can be
set up as a three button mouse.
Jim.
James V. Silverton
Potomac, Maryland.
------------------------------
From: Allan Poindexter <[EMAIL PROTECTED]>
Subject: IDE via PCI not working
Date: 14 Mar 2000 14:58:07 -0700
I have a user who is using IDE on both his motherboard and on a PCI card. The
docs seem to indicate that the IDE drive automatically probes PCI IDE cards
for disks. Linux sees the motherboard IDEs but does not seem to probe the PCI
card. Is there any sort of boot parameter voodoo I can use to encourage the
drive to probe?
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: No printing available.
Date: Tue, 14 Mar 2000 22:08:48 GMT
In article <8amabd$aft$[EMAIL PROTECTED]>,
[EMAIL PROTECTED] wrote:
> In article <[EMAIL PROTECTED]>,
> Matt Starnes <[EMAIL PROTECTED]> wrote:
> > Goofy wrote:
> >
> > > I have tried everything that I can think of to get this stupid
> printer to
> > > print.
> > > I currently have an ASUS P2B motherboard. I have tried to install
> the
> > > printer from gnome and when it does an autodetection of /dev/lp0
or
> /dev/lp1
> > > ....etc I get an error message saying devices not found.... I
tried
> doing a
> > > simple print fromm the terminal .... echo "hello, world" >
/dev/lp0
> and got
> > > an error message saying device not found.... how can I install the
> printer
> > > ports... printing works fine in windows.... Help please
> > >
> > > Goofy.
> >
> > Check in your kernel configuration (make menuconfig in console, or
> make xconfig
> > in x) and make sure you have all the relevant parallel port items
> turned on,
> > especially auto-probe.
> >
> > Matt
>
> The same problem with my machine: ASUS P3B-F mother board, HP2100
> printer working on NT but not under linux... I think that the parallel
> port doesn't work well on this board. I've compiled a new kernel with
> all parallel options turned on, I've tried all configs for parallel
port
> (Normal, EPP, ECP, EPP+ECP) but nothing. Another afternoon loosed. Any
> help or hint is welcomed.
>
> dim ([EMAIL PROTECTED])
Well... not really loosed afternoon;
(First) Solution in my case:
# rmmod lp
# rmmod parport_probe
# modprobe parport_pc
# printtool
Now I have a parallel port, I used printtool after that. for my hp2100 I
used HPlj3/4/5 without Postscript support driver.
but how can I use its 1200dpi support???? It's another question...
hope that works also for you,
dim
=================
root@pc-dmarinca /root]# lsmod
Module Size Used by
lp 5692 0 (autoclean)
parport_pc 5588 1
parport 7060 1 (autoclean) [lp parport_pc]
lockd 31304 1 (autoclean)
sunrpc 52580 1 (autoclean) [lockd]
3c59x 18664 1 (autoclean)
nls_iso8859-1 2020 2 (autoclean)
nls_cp437 3548 2 (autoclean)
vfat 9084 2 (autoclean)
fat 30208 2 (autoclean) [vfat]
es1371 25152 0
soundcore 2404 4 [es1371]
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: "Charles W. Shults III" <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.setup,comp.os.linux.questions,sci.electronics.components,sci.electronics.misc,sci.electronics.design,sci.electronics.basics
Subject: Re: How to build a parallel port tester?
Date: Tue, 14 Mar 2000 17:17:13 -0500
Hi, Timo.
Your machine is expecting a couple of logic levels on the "printer ready" and
"on line" inputs. There are five lines that act as direct inputs to the port.
One serves as an interrupt, the others are direct bits that can be read through
simple software. Your printer driver expects to see some of those lines at
specific levels, but I am not sure without looking them up what to set them
to. Get the pinout and look it over. I'll get mine in case you can't find
one.
Cheers!
Chip Shults
SPAM free Email - [EMAIL PROTECTED] but remove the .baryon
PGP \\ 8B27 CFD5 AAD5 67EA BF00
Key // 7529 9CF6 C3D7 233C D4D9
------------------------------
From: "A-Tuin �" <[EMAIL PROTECTED]>
Subject: Re: sm56 isa or rockwell hcf pci modems and linux
Date: Tue, 14 Mar 2000 22:27:46 -0000
If you ever find a solution to this please let me know, coz mine's sat
gathering dust.TIA
--
Send reply emails to [EMAIL PROTECTED]
ICQ# 40372896
ICQpage me @ http://wwp.icq.com/40372896
quick message to [EMAIL PROTECTED]
SMS +44 (0) 7715 565 785
Plain Text message to [EMAIL PROTECTED]
Get paid to surf @ http://alladvantage.com/go.asp?refid=GPI186
<[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED]...
> i have heard it is possible to get certain winmodems working on linux and
> even read a request in driverforum about the hcf 56k pci modem wich i only
> recently foun out was a winmodem saying if you a certain init string and
> set it on /dev/stddl1 it should work but my version of linux mandrake
> running xwindows and kde doesn't seem to list that mnt so i was wondering
> if someone could help me get linux to detect and run either of these
> modems thanks all
>
> --
> Posted via CNET Help.com
> http://www.help.com/
------------------------------
From: Dimitri Papadopoulos <[EMAIL PROTECTED]>
Subject: ABIT BP6 [was: Re: SMP / Adaptec 2940 problems]
Date: Wed, 15 Mar 2000 23:38:20 +0100
LhD Administrator wrote:
>
> As for Adaptec 2940xx, the recent drivers all seem to work well for most
> people, SMP or UP.
Hi,
It seems that my problems have nothing to due with the Linux
kernel, only with the poor quality of the ABIT BP6 motherboard.
I strongly discourage the use of BP6 motherboards for "heavy" use
like using Adaptec SCSI hosts.
I moved my Adaptec AHA-2940UA and AHA-2940-U2W hosts around,
changing PCI slots. I found that:
- One slot won't work at all with either Adaptec host (SCSI
devices attached to the host are not found while the SCSI BIOS
scans the SCSI bus).
- Another slot seems to make it, but SMP-kernels hang later on
with this message:
scsi : aborting command due to timeout : pid 16, scsi1,
channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
- Probably by mere miracle, I've found two PCI slots that work
with my Adaptec hosts and SMP-kernel - for now. I intend to
return the motherboard anyway and buy some other brand: I fear
all this could well cause problems later on - mysterious timeouts
and so on...
Note that:
- The Adaptec SCSI hosts work fine with other motherboards.
- This is the second BP6 motherboard I test. The first one was
even worse. I couldn't find a working pair of PCI slots for
my Adaptec hosts. Note that I wasn't able to test all
combinations. I had to return the motherboard because it died
while I was moving the SCSI hosts around. I was wearing a wrist
strap and operating with power off / computer case unplugged
in case you were wondering.
- The overall quality seems very poor. For example the BIOS has
this ridiculous bug that it won't display the bottom pixels of
a letter while booting, e.g. it will display:
*
**
*
*
*
*
*
* *
* *
instead of:
*
**
*
*
*
*
*
* *
* *
***
Dimitri Papadopoulos
------------------------------
From: "Michael" <michael!nospam!(at)pldi.net>
Subject: Ricoh CD-R/RW mp7060s
Date: Tue, 14 Mar 2000 16:34:07 -0600
I am considering purchasing this for a system using windows and linux. If
anyone has had any experience at all with it I would appreciate your input.
Michael
------------------------------
From: [EMAIL PROTECTED] (C. Newport)
Crossposted-To: uk.comp.os.linux
Subject: Re: 3-button serial mouse
Date: 14 Mar 2000 22:11:08 -0000
Peter T. Breuer ([EMAIL PROTECTED]) wrote:
: Matthew Malthouse <[EMAIL PROTECTED]> wrote:
: : In article <894lsv$2cl$[EMAIL PROTECTED]>,
: : [EMAIL PROTECTED] (C. Newport) wrote:
: : Eek! I've had to use them from the days when they were the only option for
: : Suns and I HATE them, truely and utterly detest. The wipe clean notion
: : would be fine if they worked in any reasonable manner even when pristine.
: I've never understood this. I've used both types of mice for years and
: I love the optical mice and hate the roller mice. Rollers clog up and
: need cleaning or just plain stop working. Optical mice always work just
: perfect.
Someone has buggered up the attributions. I didnt say that.
I suggested the Sun optical mice as a solution for dusty environments
which clog up the common ball type, and a whole herd of ex-students
piled in with how much they hated them at uni.
I still use the modern ones when appropriate. Sun still sells them
as an optional extra.
------------------------------
From: "maqish" <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.help,comp.os.linux.networking,comp.os.linux.questions,comp.os.linux.security,comp.os.linux.setup,comp.os.linux.x,comp.security.firewalls,linux.redhat,linux.redhat.install,linux.redhat.misc
Subject: Re: linux in notebook
Date: Wed, 15 Mar 2000 00:04:03 +0100
not really, i have it installed on a Dell inspirion 3500
works great
Marc Maqish Bannink
Bass���v <[EMAIL PROTECTED]> schreef in berichtnieuws
8alqi5$[EMAIL PROTECTED]
> is there anything need to pay attention when install linux in notebook ?
> for excmple touchpad etc....
>
>
> --
> Bass said :
> I'm here ....... why....?....
> I'm "WAITING" ...... here
> For what ?
> I'm waiing ..... for you ..... so
> If You Come Here ......
> you can play me
> I promise. ( woo !I'm coming !! )
>
>
> PS : Hope Everybody LOVE "Bass" !!!!!
>
>
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
