Linux-Hardware Digest #658, Volume #12 Tue, 11 Apr 00 02:13:06 EDT
Contents:
eth0 failed (Mark Bratcher)
Re: eth0 failed (Lucky)
Cable Modem Tweaks In Linux? (Lucky)
Re: Rockwell Modem ("Shane Jones")
Re: Creative 128PCI problem ([EMAIL PROTECTED])
Re: Netscape Problem ....SLOW (Iceman)
laptop cdrom: DriveReady SeekComplete Error ([EMAIL PROTECTED])
Re: Print in Linux with HP Deskjet 820Cxi... is it possible? ("Levoz")
Re: Print in Linux with HP Deskjet 820Cxi... is it possible? ("Levoz")
Re: XFree 4.0 and Logitech Mouse ("David ..")
Re: high altitude modern systems performance ("M. Smith")
Re: Rockwell Modem ("David St.Clair")
Re: Printer makes 1/2 size pages (John McKown)
HELP: getting SB16 & OPTI931 to cooperate under Linux
Re: Sound Driver problems CMedia (Edward Lee)
810 chipset & Red Hat Installation ([EMAIL PROTECTED])
Re: harddisk tragedy ("Igor T.")
Re: harddisk tragedy (Mark Hahn)
Dataswitch? ([EMAIL PROTECTED])
XFree4.0: Imwheel Doesn't Work Now (Lucky)
HELP: getting SB16 & OPTI931 to cooperate under Linux
Can't access DAT Drive. (Vincent)
Re: harddisk tragedy ("John Smith")
----------------------------------------------------------------------------
From: Mark Bratcher <[EMAIL PROTECTED]>
Subject: eth0 failed
Date: Mon, 10 Apr 2000 22:10:16 -0400
Hi.
I have kernel 2.2.14, RH6.2, and a 3Com 3c59x card. Using DHCP (no fixed
IP for the host I'm installing on).
When I had kernel 2.0.36 and RH5.2 running, it all installed and came up
fine. I'm using DHCP (the DHCP server is another machine on the net).
However, installing RH6.2 with 2.2.14 fails to initialize the eth0
service, although the network card has been recognized and driver
initialized (according to /var/log/messages). (I ran into this same
problem simply trying to upgrade the kernel under RH5.2.)
So, my question is: why does the eth0 service fail? The scenario was
described in Ethernet-HOWTO and I checked what they said about it, but
it didn't fix my problem.
Any help appreciated.
Mark
------------------------------
Subject: Re: eth0 failed
From: Lucky <[EMAIL PROTECTED]>
Date: Mon, 10 Apr 2000 19:23:49 -0700
In article <[EMAIL PROTECTED]>, Mark Bratcher
<[EMAIL PROTECTED]> wrote:
>Hi.
>
>I have kernel 2.2.14, RH6.2, and a 3Com 3c59x card. Using DHCP
(no fixed
>IP for the host I'm installing on).
>
>When I had kernel 2.0.36 and RH5.2 running, it all installed and
came up
>fine. I'm using DHCP (the DHCP server is another machine on the
net).
>However, installing RH6.2 with 2.2.14 fails to initialize the
eth0
>service, although the network card has been recognized and
driver
>initialized (according to /var/log/messages). (I ran into this
same
>problem simply trying to upgrade the kernel under RH5.2.)
>
>So, my question is: why does the eth0 service fail? The scenario
was
>described in Ethernet-HOWTO and I checked what they said about
it, but
>it didn't fix my problem.
>
>Any help appreciated.
>
>Mark
>
>
You usually get one if the cards module is not getting installed
at bootup.
* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!
------------------------------
Subject: Cable Modem Tweaks In Linux?
From: Lucky <[EMAIL PROTECTED]>
Date: Mon, 10 Apr 2000 19:26:11 -0700
I see all sorts of tweaks for Windows to tweak your download
speeds when using a cable modem. Are there any tweaks for Linux?
* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!
------------------------------
From: "Shane Jones" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc,comp.os.linux.setup
Subject: Re: Rockwell Modem
Date: Tue, 11 Apr 2000 12:29:55 +1000
Have a read of these.
http://linuxmodem.org
http://serial.sourceforge.net/
http://www.o2.net/~gromitkc/winmodem.html
Shane
Gioel Calabrese <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Hi,
> I have a Rockwell HCF 56K Data Fax PCI Modem. Will it work under Linux?
>
> Thank you,
> Gioel
>
>
>
------------------------------
Date: Mon, 10 Apr 2000 22:44:06 -0400
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Subject: Re: Creative 128PCI problem
Mathias Mildenberger wrote:
> I 've got the same sound card - a SoundBlaster 128 PCI - and it works
> perfectly with kernel support for ES1371 only - after I removed an old
Howd that happen??? I got an SB128 and I can`t get it to work outside of
the oss drivers. I would like to get it to work without the oss but so
far no dice!
------------------------------
From: Iceman <[EMAIL PROTECTED]>
Subject: Re: Netscape Problem ....SLOW
Date: Mon, 10 Apr 2000 18:55:02 -0700
Hi:
Try more memory. Netscape really sucks it up. I had the
same problem when I'd only 64 MB, but with 128 it's OK. I
assume you're running Gnome or KDE as well--and they also
suck it up.
Good luck!
* Sent from AltaVista http://www.altavista.com Where you can also find related Web
Pages, Images, Audios, Videos, News, and Shopping. Smart is Beautiful
------------------------------
From: [EMAIL PROTECTED]
Subject: laptop cdrom: DriveReady SeekComplete Error
Date: Tue, 11 Apr 2000 02:48:29 GMT
I have a question about a problem I'm having with my laptop's internal
CDROM drive, /dev/hdc:
hdc: CD-ROM CDR_U200, ATAPI CDROM drive
hdc: ATAPI 16X CD-ROM drive, 128kB Cache
The laptop is running Redhat 6.0 (kernel 2.2.5). The drive seems to
be working ok, but I get the following message quite frequently in
/var/log/messages when using cd-ripping software to dump CD audio
data into wav sound files:
kernel: hdc: packet command error: status=0x51 { DriveReadySeekComplete
Error }
kernel: hdc: packet command error: error=0x34
kernel: ATAPI device hdc:
kernel: Error: Medium error -- (Sense key=0x03)
kernel: No seek complete -- (asc=0x02, ascq=0x00)
kernel: The failed "<NULL>" packet command was:
kernel: "be 04 00 00 2c 4c 00 00 01 f8 00 00 "
What does this mean?
(Please CC: me on any followups)
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: "Levoz" <[EMAIL PROTECTED]>
Subject: Re: Print in Linux with HP Deskjet 820Cxi... is it possible?
Date: Mon, 10 Apr 2000 22:58:19 -0400
Thanx everyone... I'll try these solutions...
Levoz
"Levoz" <[EMAIL PROTECTED]> wrote in message
news:Vr2I4.598$[EMAIL PROTECTED]...
> Hi
>
> Have this little problem: Linux is detecting my HP printer as an HP
Deskjet
> 820C, which is correct (this is my windows driver) on /dev/lp0. There is
no
> specific drivers for this model included in Mandrake 7.02, but there is a
> Deskjet/Deskjet Plus driver, but it doesn't work... I tried almost every
HP
> drivers there, but nothing prints. I also tried different port like lp1
and
> lp2... same problem... So is it possible to print with this printer in
> Linux? (It is written on the printer's sticker: for Windows!!!)
>
> If nobody found a solution, how can I place it in my home network, if I
want
> to be able to print from any stations except the server?
>
> thanx
>
> Levoz
>
>
------------------------------
From: "Levoz" <[EMAIL PROTECTED]>
Subject: Re: Print in Linux with HP Deskjet 820Cxi... is it possible?
Date: Mon, 10 Apr 2000 22:58:19 -0400
Thanx everyone... I'll try these solutions...
Levoz
"Levoz" <[EMAIL PROTECTED]> wrote in message
news:Vr2I4.598$[EMAIL PROTECTED]...
> Hi
>
> Have this little problem: Linux is detecting my HP printer as an HP
Deskjet
> 820C, which is correct (this is my windows driver) on /dev/lp0. There is
no
> specific drivers for this model included in Mandrake 7.02, but there is a
> Deskjet/Deskjet Plus driver, but it doesn't work... I tried almost every
HP
> drivers there, but nothing prints. I also tried different port like lp1
and
> lp2... same problem... So is it possible to print with this printer in
> Linux? (It is written on the printer's sticker: for Windows!!!)
>
> If nobody found a solution, how can I place it in my home network, if I
want
> to be able to print from any stations except the server?
>
> thanx
>
> Levoz
>
>
------------------------------
From: "David .." <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.help
Subject: Re: XFree 4.0 and Logitech Mouse
Date: Mon, 10 Apr 2000 22:23:05 -0500
Roy Anger wrote:
>
> I have recently upgraded my system to the latest XFree 4.0, using the
> source. I have it up and running, with the proper video and resolution
> and colours, but I am having a problem with the mouse. I'm using the
> Logitech First Mouse, the mouse with two buttons and scroll wheel. When
> I start up X the mouse doesn't move at all.
>
> I've read through the README.mouse with the XFree and tried the info
> that is there. Nothing indicates there is a problem with the mouse or
> the Protocols that I have selected, except that the mouse doesn't move
> at all.
>
> I was wondering if anyone else has seen this problem, or is using this
> mouse and knows how to get it working.
>
> The mouse works at the console, it only fails in this version of XFree.
> As I said I'm using the tarballs for the latest X built on a Redhat 6.1
> distro.
>
> Any assistance would be helpful and appreciated. Feel free to email
> responses if you like.
>
> Thanks
> Roy
I don't use XFree 4.0 but do use a PS/2 logitech 3 button scroll wheel
mouse and to make it work I had to choose generic PS/2 and /dev/psaux
but as I said I don't use XFree 4.0
--
Registered with the Linux Counter. http://counter.li.org/
ID # 123538
------------------------------
From: "M. Smith" <smith_ml@swbell-dot-net>
Crossposted-To: comp.sys.ibm.pc.hardware.systems
Subject: Re: high altitude modern systems performance
Date: Mon, 10 Apr 2000 22:47:07 -0500
Kenneth Mankoff wrote:
>
> Hello everyone,
> I live at 10,000 feet and have had all systems newer than a 486DX33Mhz
> computer fail me. Since november, this is:
Anyone consider that the extremely low humidity at this altitude may be
greatly increasing the static shock hazard?
Hard to think this would cause repeated systems to fail, but living in humid
St. Louis, so what would I know about low humidity? I only read about it in
books. <g>
------------------------------
From: "David St.Clair" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc,comp.os.linux.setup
Subject: Re: Rockwell Modem
Date: Mon, 10 Apr 2000 16:18:35 -0400
Nope...sorry. I have that modem. It's a winmodem. If you really need a
modem for linux, buy an external or something that's not a Winmodem.
David St.Clair
Gioel Calabrese wrote:
> Hi,
> I have a Rockwell HCF 56K Data Fax PCI Modem. Will it work under Linux?
>
> Thank you,
> Gioel
------------------------------
From: [EMAIL PROTECTED] (John McKown)
Subject: Re: Printer makes 1/2 size pages
Date: Mon, 10 Apr 2000 20:31:27 -0500
On Mon, 10 Apr 2000 23:52:44 +0200, Torstein Finnbakk
<[EMAIL PROTECTED]> wrote:
>I have installed RedHat 6.1. My printer is an Canon BJ-30 (for ink)
>There is no option for this one in Printtool. When I use the driver for
>any of the other Canons, it works, but the pages are only 1/2 of the
>size of the A4 format.
You didn't say what printer setup that you did use. I assume that it was
another Canon. In the three that are list on my RedHat 6.0 system, all
had a paper size of A4 available. Did you set your paper size in printtool
to A4? Or did you leave it at the default of letter? If you did change it,
I have no idea why you are only getting A3 sized paper.
John
------------------------------
From: <[EMAIL PROTECTED]>
Subject: HELP: getting SB16 & OPTI931 to cooperate under Linux
Date: Tue, 11 Apr 2000 04:33:03 GMT
Hi,
I'm trying to add a soundblaster 16 to my system to complement the (crappy) OPTI931
already inthere. My intent is to use the OPTI as a playback device while the sb would
be used strictly as an input device.
The OPTI uses the MAD16 (OSSFree) driver while the SB uses a low level driver provided
with the 2.2.14 linux kernel.
The problem I get is that there seems to be irq conflicts between the two cards, I can
get both cards to work individualy but can't seem to get them to be happy together.
OPTI settings: IO=0x530 IRQ=9 DMA=0 DMA16=3 (second DMA if you prefer) (I turned MIDI
off)
SB16 settings: IO=0x220 IRQ=5 DMA=1 DMA16=5 (MIDI not used)
interrupts used without any of the sound drivers loaded: 0, 1, 2, 3, 4, 8, 13, 14, 15
DMA used without any of the sound drivers loaded: 4
NOTE1: The OPTI is PNP but the SB isn't and I sure as hell don't know how to jumper
it, so I'd rather fiddle with the OPTI's settings.
BTW1: These are both ISA cards.
BTW2: the symptoms I get are a grabled playback along with the typical "IRQ/DRQ config
error, DMA request timed out." kernel message.
I'd be really grateful if you could give me any hint about how to get the SB and opti
to be happier together.
many thanks in advance,
S. M.
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
From: Edward Lee <[EMAIL PROTECTED]>
Subject: Re: Sound Driver problems CMedia
Date: Tue, 11 Apr 2000 10:04:47 -0700
You can get all the drivers at http://linnix.com. The 599LMR uses dm9102
(Lan), cmi8738 (Sound) and pct211 (modem). The HSP modem port is
/dev/ttyS15. I just got TCP over PPP with HSP, it's good enough for
occasional use. More importantly, it frees up the hardware modem for
other uses.
"Douglas E. Mitton" wrote:
> I also have the 599LMR (2 actually, they were so inexpensive I bought
> one for my kids).
>
> Kernel 2.2.14 has these drivers all included in the source ... as
> well, Mandrake 7 recognized everything and auto-magically configured
> sound, video and the NIC for me. Of course the WinModem is not
> working.
>
> If you find out how to get the modem running, please post as I'd like
> to experiment with that as well.
>
> The "patches" work fine too
>
> On 08 Apr 2000 14:29:35 -0500, [EMAIL PROTECTED] (Dragos A.
> Manolescu) wrote:
>
> >>>> Graham Wharton writes:
> >
> >gw> Hi all I've been trying to get my C-Media SoundPro HT8738A Onboard
> >gw> Sound to work in redhat.
> >
> >gw> Has anybody else had any luck sofar.
> >
> >[...]
> >
> >I have an m599lmr with the same chipset. I use Chen-Li Tien's CMedia
> >driver (http://www.cmedia.com.tw/8x38/linux/cmpci-2.41.tar.gz) with
> >kernel 2.2.14 (I didn't know that 2.2.14 already includes support for
> >CM8x38?). Just follow the directions in the README file and you'll get
> >(from cmpci.c):
> >
> > * /dev/dsp standard /dev/dsp device, (mostly) OSS compatible
> > * /dev/mixer standard /dev/mixer device, (mostly) OSS compatible
> > * /dev/midi simple MIDI UART interface, no ioctl
> >
> >Note that there's no /dev/sndstat.
> >
> >Everything that I've tried works just fine--mpg123, mixers, real
> >audio, esd, ksound, etc., except speak_freely. I also tried the
> >commercial OSS drivers and they work fine with speak_freely.
> >
> >If there are any other options for the CM8738 besides Chen-Li Tien's
> >and the commercial OSS, I'd also like to know.
> >
> >HTH,
> >
> >-Dragos
>
> ------------------------------------------------
> The FACTS are my Employers, OPINIONS are my own!
>
> Sorry: SPAM reduction project in progress:
> Remove the "x." from my domain to reply!
> ------------------------------------------------
------------------------------
From: [EMAIL PROTECTED]
Subject: 810 chipset & Red Hat Installation
Date: Tue, 11 Apr 2000 04:38:19 GMT
Bismillah
I recently upgraded from Intel ZX board to Intel 810 Board . I am unable
to install Red Hat and I get the message ":Probing Mouse Type" Then ,
"Unable to Probe Nouse Type. PLease choose one manually". Then
everything freezes.
Has anyone any idea of what the problem could be?
Regards
Dr Asif R Malik
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: "Igor T." <none@all>
Subject: Re: harddisk tragedy
Date: Mon, 10 Apr 2000 23:52:07 -0500
AFAIK modern SCSI drives have 5 year warranty for normal
operation (always on). IDE drives have 3 year and from my
experience bad sectors begin to appear on IDE drives just about
as warranty is over.
--
Best regards,
Igor.
[if replying by email please reply to itereshATuswestDOTnet]
"John Smith" <[EMAIL PROTECTED]> wrote in message
news:ZusI4.72466$[EMAIL PROTECTED]...
> My 4 year old Seagate 1.2GB harddrive is finally completely dead. I've
been
> using it in a linux server, mainly for file and internet sharing. My
> questions are: should I expect the same from any other ordinary drive, was
> it just too old, did I just get a bad one, or did I maybe do something
wrong
> with it?
> First I had random system crashes. When I rebooted, I had to fsck - it
found
> a bunch of errors, bad i-nodes, and who knows what - fixed them (0.7%
> non-contiguous) then the system ran again without problems. I had it
running
> 24 / 7 for quite a while until the whole crash procedure started repeating
> itself more frequently. The last few weeks a few programs started giving
> errors, and some didn't start at all. Finally I was unable to boot. Now I
> can boot up with a Win98 boot disk, run fdisk and it doesn't even see the
> hard drive. All I get is a "no fixed disks" message. So I guess it's
> actually dead now.
> So here's my question again - it that normal for a "older" hd? Does linux
> actually suck that much out of a harddrive when running 24/7? I find it
hard
> to believe when I think of all the computers at university with normal
> drives that are running all the time and with a lot more reading and
writing
> going on.
> I'm planing to buy a new drive soon - would a SCSI be worth it (i don't
> actually need to read/write that much from it - I've got a second drive
for
> that - and it's doing fine)?
> Please tell me a little about you experiences with older drives.
>
> Thanks
>
>
------------------------------
From: Mark Hahn <[EMAIL PROTECTED]>
Subject: Re: harddisk tragedy
Date: 11 Apr 2000 04:54:25 GMT
> My 4 year old Seagate 1.2GB harddrive is finally completely dead. I've been
there's a reason it probably had a 3-year warantee.
> questions are: should I expect the same from any other ordinary drive, was
> it just too old, did I just get a bad one, or did I maybe do something wrong
> with it?
it was just too old. it's silly to think that any hardware with moving
parts will last forever, and in this case, it's a good idea to plan on
incrementally upgrading your disk every couple of years.
> First I had random system crashes. When I rebooted, I had to fsck - it found
> a bunch of errors, bad i-nodes, and who knows what - fixed them (0.7%
with any Unix, including Linux, ANY such problems are a sign that you
should migrate off that hardware! it's sad that people have gotten so
accustomed to crappy software that they assume that cries of pain
from their hardware are just some software/OS bug.
> So here's my question again - it that normal for a "older" hd? Does linux
as another followup mentioned, you could have killed it with heat.
there's really no way to know, from your description.
> actually suck that much out of a harddrive when running 24/7? I find it hard
24/7 is NOT a stressor. in fact, start/stop cycles ARE, as is heat
physical shock and conceivably (distantly) certain repetitive operations.
> I'm planing to buy a new drive soon - would a SCSI be worth it (i don't
scsi drives usually offer a longer warantee period; this does NOT
translate to an expectation of greater reliability.
> Please tell me a little about you experiences with older drives.
old drives SUCK. SUCK, SUCK, SUCK. they're hot, noisy, small, slow.
how could they be any worse? seriously: don't get attached to hardware.
computers are not an investment.
------------------------------
From: [EMAIL PROTECTED]
Subject: Dataswitch?
Date: Tue, 11 Apr 2000 05:10:29 GMT
Not quite a LINUX hardware issues, but I have 2 LINUX boxes I would
like to control with 1 keyboard, 1 mouse, and 1 monitor. Can someone
recommends a good, reliable and cheap data switch box? I bought a
box, but the keyboard and the mouse would hang after a few switches,
and the monitor shows "waves"
Thanks for all help.
Helena
------------------------------
Subject: XFree4.0: Imwheel Doesn't Work Now
From: Lucky <[EMAIL PROTECTED]>
Date: Mon, 10 Apr 2000 22:30:07 -0700
If I try to edit the XF86Config to file to
relect "ZAxisMapping 4 5 " like I've been doing
for some time now, the X-sever won't start up.
It gives me an error saying these are not "valid
key words" I'm running Best Linux 2000. Anyone
know what this error is all about?
* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!
------------------------------
From: <[EMAIL PROTECTED]>
Subject: HELP: getting SB16 & OPTI931 to cooperate under Linux
Date: Tue, 11 Apr 2000 05:30:04 GMT
Hi,
I'm trying to add a soundblaster 16 to my system to complement the (crappy) OPTI931
already inthere. My intent is to use the OPTI as a playback device while the sb would
be used strictly as an input device.
The OPTI uses the MAD16 (OSSFree) driver while the SB uses a low level driver provided
with the 2.2.14 linux kernel.
The problem I get is that there seems to be irq conflicts between the two cards, I can
get both cards to work individualy but can't seem to get them to be happy together.
OPTI settings: IO=0x530 IRQ=9 DMA=0 DMA16=3 (second DMA if you prefer) (I turned MIDI
off)
SB16 settings: IO=0x220 IRQ=5 DMA=1 DMA16=5 (MIDI not used)
interrupts used without any of the sound drivers loaded: 0, 1, 2, 3, 4, 8, 13, 14, 15
DMA used without any of the sound drivers loaded: 4
NOTE1: The OPTI is PNP but the SB isn't and I sure as hell don't know how to jumper
it, so I'd rather fiddle with the OPTI's settings.
BTW1: These are both ISA cards.
BTW2: the symptoms I get are a grabled playback along with the typical "IRQ/DRQ config
error, DMA request timed out." kernel message.
I'd be really grateful if you could give me any hint about how to get the SB and opti
to be happier together.
many thanks in advance,
S. M.
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
From: Vincent <[EMAIL PROTECTED]>
Subject: Can't access DAT Drive.
Date: Tue, 11 Apr 2000 05:30:10 GMT
Dear all,
I have just buy the Seagate STD28000SB DDS-2 DAT Drive and Apdatec
2940W SCSI card and try to install it under Redhat Linux 6.1 automatically.
I don't know if I have installed it.How can I test it?
Brgds,
Vincent.
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
From: "John Smith" <[EMAIL PROTECTED]>
Subject: Re: harddisk tragedy
Date: Tue, 11 Apr 2000 05:40:56 GMT
I did have the computer in a closed closet. I didn't really think it would
matter much, since the temperature in the closet didn't get too high, and it
was opened at least once a day. Or is that enough to harm a drive?
Thanks for your reply,
Nathan
"Svend Garnaes" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> John Smith wrote:
>
> > So here's my question again - it that normal for a "older" hd? Does
linux
> > actually suck that much out of a harddrive when running 24/7? I find it
hard
> > to believe when I think of all the computers at university with normal
> > drives that are running all the time and with a lot more reading and
writing
> > going on.
>
> Normal i/o will likely not wear out your drive. Swapping may, though.
> Do you have sufficient memory installed for your purposes?
>
> Also, environmental factors (notably ambient temperature) have a
> profound
> influence on disk lifetime, and may well account for the observed
> differences.
>
> IDE or SCSI: Buy a hard disk _and_ an air conditioning unit :)
>
> --
>
> Svend
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
