Linux-Hardware Digest #561, Volume #13 Mon, 11 Sep 00 21:13:08 EDT
Contents:
Re: Ethernet Really Slow in Linux (Hal Burgiss)
Re: Scanner/Printer (Andrey Vlasov)
un-eject a CD? Too far to walk over to shove it back in ("Dan Jacobson")
Re: UPS, 9-hole port just for show, Taiwan anonymous manufacturers ("Dan Jacobson")
Re: Zip 100 Parallel Port Drive (Peter Rodriguez)
Re: MODEM (Dean Plude)
Re: MODEM ([EMAIL PROTECTED])
Re: Should I upgrade my system or buy new? ([EMAIL PROTECTED])
Re: High Speed Modem ("Bartek Kostrzewa")
Re: Serial port problem (John Todd)
Re: High Speed Modem ("Bartek Kostrzewa")
Re: BIOS setup on an old 386 (Tom Massey)
Re: Multi-session CD's without -eject (cdrecord) ([EMAIL PROTECTED])
Re: Memory questions, Device questions; Remove LILO on RH6.2 ("Bartek Kostrzewa")
boot/root disks not finding hard drive on Thinkpad 720 ([EMAIL PROTECTED])
Re: BIOS setup on an old 386 (Yves Bellefeuille)
Re: BIOS setup on an old 386 (Yves Bellefeuille)
Linux won't boot with Thunderbird! ("Frank T. Allotta")
Re: HELP! how do i setup linux to use my Seagate 4/8GB Travan Tape Drive?
(bullwinkle)
Add CD to old 486 (Mike Fourcher)
Re: What about Rockwell HCF 56k Data fax speakerphone PCI modem (Mike Fourcher)
Re: Linux on a really old machine with no CD-ROM (Mike Fourcher)
Re: BIOS setup on an old 386 (Mike Fourcher)
----------------------------------------------------------------------------
From: [EMAIL PROTECTED] (Hal Burgiss)
Subject: Re: Ethernet Really Slow in Linux
Reply-To: Hal Burgiss <[EMAIL PROTECTED]>
Date: Mon, 11 Sep 2000 21:38:26 GMT
On Mon, 11 Sep 2000 15:58:20 -0500, Doubt <[EMAIL PROTECTED]> wrote:
>I think you nailed it .. the "Buffered disk read test" benchmark was maxing
>at about 2.3meg/sec which was what I was downloading at. Unfortunately by
>messing with options I've only got it up to 2.67meg/sec ... I think I need
>to recompile kernel to support ultradma, think that will dramatically
>improve performance? Also, when i formated the drive I just did "mke2fs
>/dev/hdc1" .. so I guess it did the default 1024 block size ... somewhere I
>read reformatting it with 4096 will improve performance by reducing number
>of seeks? Anyone know how accurate that is, it will require alot of file
>moving to get that reformated. Thanks again.
You get the biggest performance boost with 'hdparm -d1 /dev/hdc'. This
may get you over 10M/s without any recompiling. I would read the hdparm
first for warnings about certain drives. Also, don't know your distro,
but RH for one is now defaulting to blocksize of 4096 IIRC: tune2fs -l
/dev/hdc1.
--
Hal B
[EMAIL PROTECTED]
[EMAIL PROTECTED]
--
------------------------------
From: Andrey Vlasov <[EMAIL PROTECTED]>
Subject: Re: Scanner/Printer
Date: Mon, 11 Sep 2000 14:52:57 -0700
Hi there,
just today on http://freshmeat.net was anounsement which could be
intresting for you, which point to next website
http://hpoj.sourceforge.net/
these probably what are you looking for
http://hpoj.sourceforge.net/suplist.shtml
but I'd like remark - If scanner broke down you need repair it and you
loose printer as well. I'd not recommend unified devices in critical
envirovment as a lot depends on the device and if it out of order you
will lost a big piece of functional hardware.
NOTE: I have Epson Stylus Color 860 and UMAX scanner 2400S (SCSI) - all
works almost perfect.
Andrey
[EMAIL PROTECTED] wrote:
> I'm looking to buy a scanner and printer. I had
> first set my eye on the
> Officejet G55 but it seems that there are some
> problems with it and Linux.
>
> Can anyone recommend me a good scanner
> (flatbed/color) and printer (color)
> with which I should have no problems in Linux?
>
> Thanks.
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.
------------------------------
From: "Dan Jacobson" <[EMAIL PROTECTED]>
Crossposted-To: alt.horror.video,alt.movies.monster,comp.os.linux.misc
Subject: un-eject a CD? Too far to walk over to shove it back in
Date: Mon, 11 Sep 2000 19:42:14 +0800
> >appears from the examples that multi-session uses the -eject option to
> >cause the CD to be ejected along the way. I'm assuming that this is so
By the way, I just thought of a script for a horror movie: user gets
remotely hacked and suddenly his two CD drives start alternatively opening
[ejecting] and closing just like the dresser drawers in legacy horror
movies.
By the way#2. I remember in windows, many programs would gratuitously
eject the CD after finishing, with no command available to push it back
in, causing me to have to walk over to the PC 10 meters away and shove it
back in. Surely in Linux there's a [shell?] command to shove a CD back
in? Folowups-to: comp.os.linux.misc
--
www.geocities.com/jidanni E-mail: restore ".com." �n����
Tel:+886-4-5854780; starting in year 2001: +886-4-25854780
------------------------------
From: "Dan Jacobson" <[EMAIL PROTECTED]>
Crossposted-To: sci.engr.electrical.sys-protection,soc.culture.taiwan
Subject: Re: UPS, 9-hole port just for show, Taiwan anonymous manufacturers
Date: Mon, 11 Sep 2000 18:28:16 +0800
"Roger Kristiansen" <[EMAIL PROTECTED]> ���g��l��
news:8obcik$fac$[EMAIL PROTECTED]...
> I'm setting up a linux server that I need a UPS and some backup-system
on.
> Now, are the any special manufacturers I should buy from?
I bought a UPS made by www.cellpower.com.tw , "P-600R".
It seems to work OK, but I have some comments:
First, when I grew up in the USA, I was used to companies proudly putting
their contact information on their products. Often here in Taiwan, due
to resale agreements or whatever, it's often real hard to find traces of
who made the product from the labels! The way I found out for the above
product was from reconstructing a street address I found on a picture of a
trophy on the box!
Second, when I succeeded in finally contacting the above company, the man
admitted that the 9-hole port is really just for show, and I'd be better
off not trying to get software to try to control the UPS!
--
www.geocities.com/jidanni E-mail: restore ".com." �n����
Tel:+886-4-5854780; starting in year 2001: +886-4-25854780
------------------------------
Date: Tue, 12 Sep 2000 09:22:37 +1200
From: Peter Rodriguez <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc,comp.os.linux.development.system
Subject: Re: Zip 100 Parallel Port Drive
This has become quite an interesting thread.
As it happens, from my point of view, the PnP switch was irrelevant. The
Parallel Port option I chose was the important thing, and all I know is
that it worked :-)
--
Peter Rodriguez
136, Kolmar Road, Papatoetoe LINUX RULES
Auckland, NEW ZEALAND
------------------------------
From: Dean Plude <[EMAIL PROTECTED]>
Subject: Re: MODEM
Date: Mon, 11 Sep 2000 22:27:42 GMT
I think that it has a dos mode Should work look for ttySXX other than MB ports
or
try turning them off in bios and see what happens???
"Patricio M�tteri" wrote:
> Is there ANY way I can make a winmodem work on Linux?
> ANY?
> I have the Diamond Supra Express V. 90 fax voice something and I can't make
> it work. i don't think it's a winmodem but that's the only thing I can think
> of
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: MODEM
Date: Mon, 11 Sep 2000 22:33:26 GMT
No....Winmodems use the OS to do some of the work. Saving the cost of
some chips in the process. You will have to do one of the following:
1. purchase a "hardware" modem. A 56K "hardware" model will set you
back between $50-$90 USD. You can find 33K used ones cheaper on E-Bay
Most NON-USB models will work as hardware modems. I am not sure on USB
models. I suggest surfing over to SuSE's website - www.suse.com, and
looking at the excellent hardware database they have for supported
models. My friend actually found an internal 33K used internal for $5
at the flea market!
2. do your downloads through Windows, and mount the Windows partition
to access your downloaded files
On Mon, 11 Sep 2000 17:37:17 -0300, "Patricio M�tteri"
<[EMAIL PROTECTED]> wrote:
>Is there ANY way I can make a winmodem work on Linux?
>ANY?
>I have the Diamond Supra Express V. 90 fax voice something and I can't make
>it work. i don't think it's a winmodem but that's the only thing I can think
>of
>
>
>
>
>
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: Should I upgrade my system or buy new?
Date: Mon, 11 Sep 2000 22:39:32 GMT
I suggest either buying a new system, or if you love the case that
much, gutting it and buying new internals. You can probably save the
video card. I have seen new systems w/ a 366mhz chip as low a $400,
sans monitor. You can easily spend that much on upgrading your
internals. Additionally, if you buy new, you can set the old machine
up as a file server, or web server.
On Mon, 11 Sep 2000 16:22:22 GMT, [EMAIL PROTECTED] wrote:
>Here is my situation. I have been running (albeit slowly) Redhat 6.1 on
>the following system.
>
>Intel Pentium 166mhz
>I430VX MB with intel chipset
>128MB EDO RAM (4 72pin SIMMS)
>Diamond Stealth 64 Video Card
>
>I dream someday of KDE 2, koffice, etc as my main system (no more dual
>boot). It runs pretty slowly now, and I can imagine it will run slower
>in the future as software bloats.
>
>
>I am fairly proficient with things technical, so installing new
>components myself wouldn't scare me. So questions I have are:
>
>1. Is the motherboard worth keeping? Would a faster CPU help at all? I
>suppose that if I get a new motherboard (and, consequently CPU), I'll
>have to get new RAM as well (but maybe not?).
>
>2. Should I scrap the whole motherboard/CPU/RAM/(and videocard?) combo
>and go new? I like the case (full tower 6 x 5.25" drive bays). The
>hard drives are solid, as is the network card.
>
>Any suggestions would be much appreciated.
>
>Thanks
>JPK
>
>
>Sent via Deja.com http://www.deja.com/
>Before you buy.
------------------------------
From: "Bartek Kostrzewa" <[EMAIL PROTECTED]>
Subject: Re: High Speed Modem
Date: Tue, 12 Sep 2000 00:49:08 +0200
check out the linux documentation project, they have lotsa good dsl howto's
www.linuxdoc.org
As you are using an Ethernet combo bets are very good that it will work just
fine.
--
Bartek Kostrzewa - [EMAIL PROTECTED]
<<< http://technoage.web.lu >>>
Vladimir Laserman <[EMAIL PROTECTED]> schrieb in im Newsbeitrag:
mPav5.6694$[EMAIL PROTECTED]
> How can I configure my high speed modem in linux?
> I live in Canada, and have Sympatico High Speed Modem Edition (DSL), it's
> include High speed modem and Ethernet Network card. High speed modem
> connected to phone line and to Ethernet card. I don't know how to connect
to
> the Internet by using this hardware in Linux, please HELP !!!
>
>
------------------------------
From: [EMAIL PROTECTED] (John Todd)
Crossposted-To: comp.os.linux,comp.os.linux.setup
Subject: Re: Serial port problem
Date: 11 Sep 2000 21:55:21 GMT
Reply-To: [EMAIL PROTECTED]
In redhat 6.0, my attempts to use irq10 (for IDE2)
met with a message that irq 10 was reserved in linux, tho
it didn't say what for. I used 11 OK.
On Mon, 11 Sep 2000 04:34:08 +0200, Slava Shklyar
<[EMAIL PROTECTED]> wrote:
>Hi,
>I have USR 56k Internal PCI modem under Redhat 6.1.
>
>/etc/rc.d/*rc.serial:
>
>setserial /dev/ttyS1 port 0xe800 irq 10 baud_base 115200 uart 16550A
>autoconfig spd_vhi
>stty -ixon crtscts line 115200 < /dev/modem
>
>So, after startup i can connect, but get only 19200 bps, when under
>another OS (win98/NT) i able to connect on 45333 bps.
>
>Maybe i have any mistake in rc.serial ? Or maybe it's not serial port
>problem and something asle ?
>
>Thank you,
>Slava Shklyar.
>
>
>
--
_____________________
The lap of Linuxury
|<de in RH6
------------------------------
From: "Bartek Kostrzewa" <[EMAIL PROTECTED]>
Subject: Re: High Speed Modem
Date: Tue, 12 Sep 2000 00:51:03 +0200
oh, here's the exact adress, so nobody thinks that I'm too lazy to check :)
http://www.linuxdoc.org/HOWTO/DSL-HOWTO/index.html
It was updated not long ago by a guy who posted in comp.os.linux.networking,
it's great at my opinion.
--
Bartek Kostrzewa - [EMAIL PROTECTED]
<<< http://technoage.web.lu >>>
Vladimir Laserman <[EMAIL PROTECTED]> schrieb in im Newsbeitrag:
mPav5.6694$[EMAIL PROTECTED]
> How can I configure my high speed modem in linux?
> I live in Canada, and have Sympatico High Speed Modem Edition (DSL), it's
> include High speed modem and Ethernet Network card. High speed modem
> connected to phone line and to Ethernet card. I don't know how to connect
to
> the Internet by using this hardware in Linux, please HELP !!!
>
>
------------------------------
From: Tom Massey <[EMAIL PROTECTED]>
Subject: Re: BIOS setup on an old 386
Date: Tue, 12 Sep 2000 09:56:44 +1100
I was afraid it was something like this. And since the companies that
made the machine, and its BIOS have both gone out of business, it's
going to be pretty hard to get the right disk. Ah well. Next step is to
pull all the bits out and stick them in an even older 286 board I've got
and see what'll happen then.
Thanks to all,
Tom
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: Multi-session CD's without -eject (cdrecord)
Crossposted-To: comp.os.linux.misc
Date: 11 Sep 2000 18:55:05 -0400
In comp.os.linux.hardware Dances With Crows <[EMAIL PROTECTED]> wrote:
> it seems as though most CD-R(W)s can retract the
> tray automatically when the drive is accessed. Try ejecting the tray,
> then issuing a "mount" command--for most drives, the tray will slide in.
See if you have an "eject" programme in your distribution.
If so, try the manual page on "eject".
eject -t
is the CD-ROM close tray command.
------------------------------
From: "Bartek Kostrzewa" <[EMAIL PROTECTED]>
Crossposted-To:
comp.os.linux.help,comp.os.linux.questions,comp.os.linux.redhat,linux.redhat.misc
Subject: Re: Memory questions, Device questions; Remove LILO on RH6.2
Date: Tue, 12 Sep 2000 01:06:10 +0200
Simple Simon <[EMAIL PROTECTED]> schrieb in im Newsbeitrag:
ME9v5.1142$[EMAIL PROTECTED]
> Hi!
>
> Forgive the crossposing but I'm not sure where to start with this.
>
[snip
>
> Linux starts up on the KDE desktop. 1024x768 at 16 bit colour.
>
> KDE on this computer is slower than my 486 running Win95 with 16meg of
> ram!!! Checking my memory usage in Linux shows that I have a whopping 13
meg
> of ram to work with, not the 192 meg I would expect. How can I speed up
the
> computer? I assume that Linux is not seeing all 192 meg of ram that I
have.
add append = "mem=192MB" to your /etc/lilo.conf > run /sbin/lilo to enable
changes
Also check for the memory hole Eric mentioned.
for more info about lilo try
man lilo
man lilo.conf
>
> Also, The MX300 soundcard is based on Aureal chips. Is there any way I can
> get this working in RH6.2?
Well, there is an ALSA driver as much as I know, although I'll agree with
Eric here, get another soundcard (my tip: Creative SB 128 PCI, works with
everything)
>
> The HP8100 is an IDE ReWriter. Is it a simple task to get this working in
> RH6.2?
You can get it to run relatively simply as a writer, not as a rewriter
unfortunately. You'll have to set SCSI emulation in the kernel blah blah
(http://www.linuxdoc.org/HOWTO/CD-Writing-HOWTO.html) :) [tired of writing
all this again and again :)]
I suggest using XRoast, I like it a lot. (GUI for cdrecord and mkisofs)
>
> Finally, I have the Windows 2000 boot menu choosing between Win2k and
RH6.2.
> How can I get rid of the LILO prompt when I choose LINUX? Are there any
> reasons to keep LILO since the Win2k menu works? LILO is not on the MBR -
> it's at the beginning of the LINUX partition (hda2).
LILO is used to load the kernel, so you need it. Just as Eric said, set the
timeout to a small or zero value. (in lilo.conf, again, don't forget to run
lilo after doing changes)
>
> Thanks for any info that you can provide!
Hope I could help.
>
> SS
Ok, it means simple simon, but it's kinda strange to read ;)
>
>
------------------------------
From: [EMAIL PROTECTED]
Subject: boot/root disks not finding hard drive on Thinkpad 720
Date: Mon, 11 Sep 2000 23:30:56 GMT
Hi,
I am trying to install Linux on a Thinkpad 720,
which is an old 486SL2 based laptop. When I boot
up with bare.i and color.gz, the system fails
to find a hard drive and none show up in /etc.
I tried mknod but I don't know the major/minor
numbers. Can anyone assist?
Thanks
Sent via Deja.com http://www.deja.com/
Before you buy.
------------------------------
From: [EMAIL PROTECTED] (Yves Bellefeuille)
Subject: Re: BIOS setup on an old 386
Date: Mon, 11 Sep 2000 20:15:02 -0400
Reply-To: Yves Bellefeuille <[EMAIL PROTECTED]>
On Mon, 11 Sep 2000, [EMAIL PROTECTED] (Brett C. Cammack) wrote:
> I suspect that it doesn't really want a DOS boot disk, but one with a
> particular bootstrap loader unique to that motherboard which loads the
> CMOS configurator into executable memory. This may be a bitch to
> accomplish unless you can find an exact binary drive image and a
> method to put it to diskette.
If you can find out that precise BIOS it's using (either from whatever
message appears when you boot or by looking at the motherboard), perhaps
someone has the program you need.
--
Yves Bellefeuille <[EMAIL PROTECTED]>, Ottawa, Canada
Francais / English / Esperanto
Fight Spam! Join CAUCE cost-free: http://www.cauce.org/
------------------------------
From: [EMAIL PROTECTED] (Yves Bellefeuille)
Subject: Re: BIOS setup on an old 386
Date: Mon, 11 Sep 2000 20:19:23 -0400
Reply-To: Yves Bellefeuille <[EMAIL PROTECTED]>
On Tue, 12 Sep 2000, Tom Massey <[EMAIL PROTECTED]> wrote:
> Next step is to pull all the bits out and stick them in an even older
> 286 board I've got and see what'll happen then.
You do know that Linux needs a 386 or better, right? It won't run at all
on a 286.
--
Yves Bellefeuille <[EMAIL PROTECTED]>, Ottawa, Canada
Francais / English / Esperanto
Fight Spam! Join CAUCE cost-free: http://www.cauce.org/
------------------------------
From: "Frank T. Allotta" <[EMAIL PROTECTED]>
Subject: Linux won't boot with Thunderbird!
Date: Mon, 11 Sep 2000 19:27:37 -0500
Hi,
I am running an Abit KT7-RAID motherboard with an AMD 750 Thunderbird.
I just installed them the other day. I installed Linux 6.2 and everything
went great during the install. Now when Linux tries to boot up, it gives an
error. It gets to a point where it says "Disabling Athlon Serial Number"
and then it gives a "General Protection Fault!" Then it it just locks up at
another error about "Not Syncing." What the heck is this? I had Linux
running on the same hard drive with a different mb and processor earlier in
the week. That is the only thing that has changed. Is this some sort of
BIOS setting problem? Give me a hand here!
Frank
You can email me directly if you like. Thanks!
------------------------------
From: bullwinkle <[EMAIL PROTECTED]>
Subject: Re: HELP! how do i setup linux to use my Seagate 4/8GB Travan Tape Drive?
Date: Tue, 12 Sep 2000 00:28:46 GMT
niko wrote:
>
> I have just purchased and installed the above tape drive into my system.
I am
> running Slackware 4. I have compiled the tape drivers into the kernel and
am now
> wondering HOW to backup data to it............
>
> ANY help/pointers would be GREATLY appreciated.
>
> Thanks in advance
>
> Nicolas
>
Is the drive SCSI or IDE?
>
> --
> The reply to is a spam trap.
> Please reply to
> niko at ar dot com dot au
>
>
>
--
Posted via CNET Help.com
http://www.help.com/
------------------------------
From: Mike Fourcher <[EMAIL PROTECTED]>
Subject: Add CD to old 486
Date: Mon, 11 Sep 2000 20:35:28 -0400
I've got an '93 vintage 486 that I'd like to add a CD to so I can
install linux. Trouble is, the BIOS is too old to allow automatic
recognition of the CD on the controller. So, I need an independent
controller card.
Can anyone recommend a controller card that has linux drivers? I tried
Siig, but they only support Win 9X/NT.
------------------------------
From: Mike Fourcher <[EMAIL PROTECTED]>
Subject: Re: What about Rockwell HCF 56k Data fax speakerphone PCI modem
Date: Mon, 11 Sep 2000 20:44:40 -0400
Here's where you really ought to go:
http://www.o2.net/~gromitkc/winmodem.html
It has a complete database of modem chipsets and whether or not they are
usable.
ino wrote:
>
> Will this work on Linux?
> i got Red Hat 6.0
> it's on com3 (/dev/ttyS2)
------------------------------
From: Mike Fourcher <[EMAIL PROTECTED]>
Subject: Re: Linux on a really old machine with no CD-ROM
Date: Mon, 11 Sep 2000 20:55:33 -0400
I'm not sure the CD install will necessarily work. I've got an old
Gateway 486 ('93 vintage) with a BIOS that does not recognize CD's on
the ISA controller. Lots of machines (especially if you have an Intel
motherboard, which I have) will require a separate ISA controller for
the CD. Unfortunately, I'm having trouble with finding an ISA card with
Linux drivers
Now to figure out the NFS install...
Stanislaw Flatto wrote:
>
> Stefan Viljoen wrote:
> >
> > Hi!
>
> Read your sad story;-((
> Not many weeks ago faced similar situation.
> After asking, looking and reading, took No 2 Phillips screwdriver,
> yanked the CD from mine "normal" box, connected it as slave on the ISA
> 16 bit controller card and saved time.
> Installation on 256M hard drive with 8M Ram went without hitch.
> OK I gave the poor OS 16M swap.
> As I was installing Slackware 7.1 I could limit the amount of programs
> to the basic a series and few "nice" utilities from ap
> series and of course n (networking).
> It works.
>
> >
> > Thanks!
> >
> > Stefan Viljoen
> > --
> > Starwars Forever!!!
>
> Have fun...
> --
> Stanislaw on Slak 7.1
> Registered on Linux counter No.162760.
> Even put Ulladulla on their database.
------------------------------
From: Mike Fourcher <[EMAIL PROTECTED]>
Subject: Re: BIOS setup on an old 386
Date: Mon, 11 Sep 2000 21:08:17 -0400
No! Don't do that. It sounds to me that you just have a bad floppy
drive. Simply _get_a_new_floppy_drive_ There's got to be a computer
fair somewhere nearby where someone will sell you one for US$10 or so.
In the states these things seem to be advertised every other weekend in
the local paper. If not that, then just get someone else's old computer
and use that floppy drive.
As for getting the BIOS program, that's easy. Just hop over to
www.phoenix.com to find the correct BIOS update program. Look for the
correct chipset number (it's displayed when you boot up) and d/l the
self-executable program.
Good luck and enjoy the Olympics!
Yves Bellefeuille wrote:
>
> On Tue, 12 Sep 2000, Tom Massey <[EMAIL PROTECTED]> wrote:
>
> > Next step is to pull all the bits out and stick them in an even older
> > 286 board I've got and see what'll happen then.
>
> You do know that Linux needs a 386 or better, right? It won't run at all
> on a 286.
>
> --
> Yves Bellefeuille <[EMAIL PROTECTED]>, Ottawa, Canada
> Francais / English / Esperanto
> Fight Spam! Join CAUCE cost-free: http://www.cauce.org/
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
