On Mon, Oct 17, 2016 at 06:38:53PM +1030, Joel Stanley wrote:
> From: Yi Li <adaml...@msn.com>
> 
> The adm1278 can optionally monitor the VOUT pin. This functioanltiy is
> not enabled at reset, so PMON_CONFIG needs to be modified in order to
> enable it.
> 
> Signed-off-by: Yi Li <adaml...@msn.com>
> Signed-off-by: Joel Stanley <j...@jms.id.au>

Applied to -next, after s/functioanltiy/functionality/

Thanks,
Guenter

> ---
> v2:
>  Return an error when unable to enable VOUT monitoring as suggestd by Guenter
> 
>  drivers/hwmon/pmbus/adm1275.c | 20 ++++++++++++++++----
>  1 file changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> index 3baa4f4a8c5e..9940849351a1 100644
> --- a/drivers/hwmon/pmbus/adm1275.c
> +++ b/drivers/hwmon/pmbus/adm1275.c
> @@ -499,15 +499,27 @@ static int adm1275_probe(struct i2c_client *client,
>               pindex = 2;
>               tindex = 3;
>  
> -             info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT;
> +             info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> +                     PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> +
> +             /* By default when reset VOUT is not enabled */

I also rephrased the comment a bit to make it easier to understand.

> +             if (!(config & ADM1278_VOUT_EN)) {
> +                     config |= ADM1278_VOUT_EN;
> +                     ret = i2c_smbus_write_byte_data(client,
> +                                                     ADM1275_PMON_CONFIG,
> +                                                     config);
> +                     if (ret < 0) {
> +                             dev_err(&client->dev,
> +                                     "Failed to enable VOUT monitoring\n");
> +                             return -ENODEV;
> +                     }
> +             }
> +
>               if (config & ADM1278_TEMP1_EN)
>                       info->func[0] |=
>                               PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>               if (config & ADM1278_VIN_EN)
>                       info->func[0] |= PMBUS_HAVE_VIN;
> -             if (config & ADM1278_VOUT_EN)
> -                     info->func[0] |=
> -                             PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
>               break;
>       case adm1293:
>       case adm1294:
> -- 
> 2.9.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to