Hi Jean, On Tue, Dec 13, 2016 at 10:48:29AM +0100, Jean Delvare wrote: > Hi Guenter, > > On Sun, 4 Dec 2016 20:55:39 -0800, Guenter Roeck wrote: > > Writes into limit attributes can overflow due to additions and > > multiplications with unchecked parameters. > > > > Signed-off-by: Guenter Roeck <[email protected]> > > --- > > drivers/hwmon/gl518sm.c | 10 +++++----- > > 1 file changed, 5 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c > > index 0212c8317bca..0a11a550c2a2 100644 > > --- a/drivers/hwmon/gl518sm.c > > +++ b/drivers/hwmon/gl518sm.c > > @@ -86,9 +86,8 @@ enum chips { gl518sm_r00, gl518sm_r80 }; > > #define BOOL_FROM_REG(val) ((val) ? 0 : 1) > > #define BOOL_TO_REG(val) ((val) ? 0 : 1) > > > > -#define TEMP_TO_REG(val) clamp_val(((((val) < 0 ? \ > > - (val) - 500 : \ > > - (val) + 500) / 1000) + 119), 0, 255) > > +#define TEMP_TO_REG(val) (DIV_ROUND_CLOSEST(clamp_val(val, -119000, > > 136000), \ > > + 1000) + 119) > > #define TEMP_FROM_REG(val) (((val) - 119) * 1000) > > > > static inline u8 FAN_TO_REG(long rpm, int div) > > @@ -101,10 +100,11 @@ static inline u8 FAN_TO_REG(long rpm, int div) > > } > > #define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * > > (div)))) > > > > -#define IN_TO_REG(val) clamp_val((((val) + 9) / 19), 0, 255) > > +#define IN_TO_REG(val) DIV_ROUND_CLOSEST(clamp_val(val, 0, 255 * 19), > > 19) > > #define IN_FROM_REG(val) ((val) * 19) > > > > -#define VDD_TO_REG(val) clamp_val((((val) * 4 + 47) / 95), 0, > > 255) > > +#define VDD_TO_REG(val) \ > > + DIV_ROUND_CLOSEST(clamp_val(val, 0, 255 * 95 / 4) * 4, 95) > > #define VDD_FROM_REG(val) (((val) * 95 + 2) / 4) > > > > #define DIV_FROM_REG(val) (1 << (val)) > > Code looks good. Alignment is a bit clumsy though. Also it feels > strange now that you are using DIV_ROUND_CLOSEST for VDD_TO_REG but not > VDD_FROM_REG. > I cleaned up the alignment, and added DIV_ROUND_CLOSEST() to VDD_TO_REG(). I'll resend an updated version.
Thanks, Guenter > Reviewed-by: Jean Delvare <[email protected]> > > -- > Jean Delvare > SUSE L3 Support -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
