This patch fix a typo where build is used instead of built.
Signed-off-by: Corentin Labbe <[email protected]>
---
drivers/hwmon/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 532a0532d01b..100b7fce1412 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -179,7 +179,7 @@ config SENSORS_ADT7X10
This module contains common code shared by the ADT7310/ADT7320 and
ADT7410/ADT7420 temperature monitoring chip drivers.
- If build as a module, the module will be called adt7x10.
+ If built as a module, the module will be called adt7x10.
config SENSORS_ADT7310
tristate "Analog Devices ADT7310/ADT7320"
@@ -242,7 +242,7 @@ config SENSORS_ADT7475
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
chips.
- This driver can also be build as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adt7475.
config SENSORS_ASC7621
@@ -666,7 +666,7 @@ config SENSORS_JZ4740
If you say yes here you get support for reading adc values from the
ADCIN
pin on Ingenic JZ4740 SoC based boards.
- This driver can also be build as a module. If so, the module will be
+ This driver can also be built as a module. If so, the module will be
called jz4740-hwmon.
config SENSORS_JC42
@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
If you say yes here you get support for the Texas Instruments
AMC6821 hardware monitoring chips.
- This driver can also be build as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called amc6821.
config SENSORS_INA209
--
2.18.1
