On Thu, Nov 29, 2018 at 08:09:14PM +0000, Corentin Labbe wrote: > This patch fix a typo where build is used instead of built. > > Signed-off-by: Corentin Labbe <[email protected]>
Applied to hwmon-next. Thanks, Guenter > --- > drivers/hwmon/Kconfig | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 532a0532d01b..100b7fce1412 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -179,7 +179,7 @@ config SENSORS_ADT7X10 > This module contains common code shared by the ADT7310/ADT7320 and > ADT7410/ADT7420 temperature monitoring chip drivers. > > - If build as a module, the module will be called adt7x10. > + If built as a module, the module will be called adt7x10. > > config SENSORS_ADT7310 > tristate "Analog Devices ADT7310/ADT7320" > @@ -242,7 +242,7 @@ config SENSORS_ADT7475 > ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring > chips. > > - This driver can also be build as a module. If so, the module > + This driver can also be built as a module. If so, the module > will be called adt7475. > > config SENSORS_ASC7621 > @@ -666,7 +666,7 @@ config SENSORS_JZ4740 > If you say yes here you get support for reading adc values from the > ADCIN > pin on Ingenic JZ4740 SoC based boards. > > - This driver can also be build as a module. If so, the module will be > + This driver can also be built as a module. If so, the module will be > called jz4740-hwmon. > > config SENSORS_JC42 > @@ -1594,7 +1594,7 @@ config SENSORS_AMC6821 > If you say yes here you get support for the Texas Instruments > AMC6821 hardware monitoring chips. > > - This driver can also be build as a module. If so, the module > + This driver can also be built as a module. If so, the module > will be called amc6821. > > config SENSORS_INA209
