Previously the VIN, IIN and PIN parameters were marked as non-paged, however on the IRPS5401 these parameters are present on multiple pages. Add the paged flag for these parameters so they can be detected properly on such chips.
Signed-off-by: Robert Hancock <[email protected]> --- drivers/hwmon/pmbus/pmbus_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index ef7ee90..6e3aaf1 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -1395,6 +1395,7 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client, .reg = PMBUS_READ_VIN, .class = PSC_VOLTAGE_IN, .label = "vin", + .paged = true, .func = PMBUS_HAVE_VIN, .sfunc = PMBUS_HAVE_STATUS_INPUT, .sbase = PB_STATUS_INPUT_BASE, @@ -1499,6 +1500,7 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client, .reg = PMBUS_READ_IIN, .class = PSC_CURRENT_IN, .label = "iin", + .paged = true, .func = PMBUS_HAVE_IIN, .sfunc = PMBUS_HAVE_STATUS_INPUT, .sbase = PB_STATUS_INPUT_BASE, @@ -1584,6 +1586,7 @@ static int pmbus_add_sensor_attrs(struct i2c_client *client, .reg = PMBUS_READ_PIN, .class = PSC_POWER, .label = "pin", + .paged = true, .func = PMBUS_HAVE_PIN, .sfunc = PMBUS_HAVE_STATUS_INPUT, .sbase = PB_STATUS_INPUT_BASE, -- 1.8.3.1
