Hello again and thanks for the early feedback! This is the re-worked patch of
the one I sent last week. It’s created against kernel 5.1.15 and already
depends on the preceding patch concerning the same code.
The nct6116 is the successor model of nct6106. Mainly, I’m unsure if certain
details of the spec are mapped correctly to the code. These details are:
- NCT6116_BEEP_BITS
- int cr24 (cr23 is new, and I’m unsure if the code has to get modified
therefore)
- NCT6116_REG_FAN_PULSES
- NCT6116_FAN_PULSE_SHIFT
- NCT6116_ALARM_BITS
With the nct6116 wired on my mainboard, the sensors command seems to work as I
would expect.
Signed-off-by: Bjoern Gerhart <gerh...@posteo.de>
---
--- nct6775-5.1.15-1.el7.elrepo.x86_64-bugfixed/nct6775.c 2019-07-10
17:08:30.710690605 +0200
+++ nct6775/nct6775.c 2019-07-10 17:30:38.012416414 +0200
@@ -34,6 +34,7 @@
*
* Chip #vin #fan #pwm #temp chip IDs man ID
* nct6106d 9 3 3 6+3 0xc450 0xc1 0x5ca3
+ * nct6116d 9 5 5 3+3 0xd280 0xc1 0x5ca3
* nct6775f 9 4 3 6+3 0xb470 0xc1 0x5ca3
* nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
@@ -72,12 +73,13 @@
#define USE_ALTERNATE
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
- nct6795, nct6796, nct6797, nct6798 };
+enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
+ nct6793, nct6795, nct6796, nct6797, nct6798 };
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
"nct6106",
+ "nct6116",
"nct6775",
"nct6776",
"nct6779",
@@ -92,6 +94,7 @@
static const char * const nct6775_sio_names[] __initconst = {
"NCT6106D",
+ "NCT6116D",
"NCT6775F",
"NCT6776D/F",
"NCT6779D",
@@ -129,6 +132,7 @@
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_NCT6106_ID 0xc450
+#define SIO_NCT6116_ID 0xd280
#define SIO_NCT6775_ID 0xb470
#define SIO_NCT6776_ID 0xc330
#define SIO_NCT6779_ID 0xc560
@@ -910,6 +914,119 @@
[12] = 0x205,
};
+/* NCT6112D/NCT6114D/NCT6116D specific data */
+
+#define NCT6116_REG_VBAT 0x318
+#define NCT6116_REG_DIODE 0x319
+#define NCT6116_DIODE_MASK 0x01
+
+static const u16 NCT6116_REG_IN_MAX[] = {
+ 0x90, 0x92, 0x94, 0x96, 0x98, 0x9a, 0x9e, 0xa0, 0xa2 };
+static const u16 NCT6116_REG_IN_MIN[] = {
+ 0x91, 0x93, 0x95, 0x97, 0x99, 0x9b, 0x9f, 0xa1, 0xa3 };
+static const u16 NCT6116_REG_IN[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x07, 0x08, 0x09 };
+
+static const u16 NCT6116_REG_TEMP[] = { 0x10, 0x11, 0x12 };
+static const u16 NCT6116_REG_TEMP_MON[] = { 0x18, 0x19, 0x1a };
+static const u16 NCT6116_REG_TEMP_HYST[] = { 0xc3, 0xc7, 0xcb };
+static const u16 NCT6116_REG_TEMP_OVER[] = { 0xc2, 0xc6, 0xca };
+static const u16 NCT6116_REG_TEMP_CRIT_L[] = { 0xc0, 0xc4, 0xc8 };
+static const u16 NCT6116_REG_TEMP_CRIT_H[] = { 0xc1, 0xc5, 0xc9 };
+static const u16 NCT6116_REG_TEMP_OFFSET[] = { 0x311, 0x312, 0x313 };
+static const u16 NCT6116_REG_TEMP_CONFIG[] = { 0xb7, 0xb8, 0xb9 };
+
+static const u16 NCT6116_REG_FAN[] = { 0x20, 0x22, 0x24, 0x26, 0x28 };
+static const u16 NCT6116_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4, 0xe6, 0xe8 };
+static const u16 NCT6116_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6, 0xf6, 0xf5 };
+static const u16 NCT6116_FAN_PULSE_SHIFT[] = { 0, 2, 4, 6, 6 };
+
+static const u8 NCT6116_REG_PWM_MODE[] = { 0xf3, 0xf3, 0xf3 };
+static const u8 NCT6116_PWM_MODE_MASK[] = { 0x01, 0x02, 0x04 };
+static const u16 NCT6116_REG_PWM[] = { 0x119, 0x129, 0x139, 0x199, 0x1a9 };
+static const u16 NCT6116_REG_PWM_READ[] = { 0x4a, 0x4b, 0x4c };
+static const u16 NCT6116_REG_FAN_MODE[] = { 0x113, 0x123, 0x133, 0x193, 0x1a3
};
+static const u16 NCT6116_REG_TEMP_SEL[] = { 0x110, 0x120, 0x130, 0x190, 0x1a0
};
+static const u16 NCT6116_REG_TEMP_SOURCE[] = { 0xb0, 0xb1, 0xb2 };
+
+static const u16 NCT6116_REG_CRITICAL_TEMP[] = {
+ 0x11a, 0x12a, 0x13a, 0x19a, 0x1aa };
+static const u16 NCT6116_REG_CRITICAL_TEMP_TOLERANCE[] = {
+ 0x11b, 0x12b, 0x13b, 0x19b, 0x1ab };
+
+static const u16 NCT6116_REG_CRITICAL_PWM_ENABLE[] = {
+ 0x11c, 0x12c, 0x13c, 0x19c, 0x1ac };
+#define NCT6116_CRITICAL_PWM_ENABLE_MASK 0x10
+static const u16 NCT6116_REG_CRITICAL_PWM[] = {
+ 0x11d, 0x12d, 0x13d, 0x19d, 0x1ad };
+
+static const u16 NCT6116_REG_FAN_STEP_UP_TIME[] = {
+ 0x114, 0x124, 0x134, 0x194, 0x1a4 };
+static const u16 NCT6116_REG_FAN_STEP_DOWN_TIME[] = {
+ 0x115, 0x125, 0x135, 0x195, 0x1a5 };
+static const u16 NCT6116_REG_FAN_STOP_OUTPUT[] = {
+ 0x116, 0x126, 0x136, 0x196, 0x1a6 };
+static const u16 NCT6116_REG_FAN_START_OUTPUT[] = {
+ 0x117, 0x127, 0x137, 0x197, 0x1a7 };
+static const u16 NCT6116_REG_FAN_STOP_TIME[] = {
+ 0x118, 0x128, 0x138, 0x198, 0x1a8 };
+static const u16 NCT6116_REG_TOLERANCE_H[] = {
+ 0x112, 0x122, 0x132, 0x192, 0x1a2 };
+
+static const u16 NCT6116_REG_TARGET[] = {
+ 0x111, 0x121, 0x131, 0x191, 0x1a1 };
+
+static const u16 NCT6116_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188 };
+static const u16 NCT6116_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189 };
+static const u16 NCT6116_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a };
+static const u16 NCT6116_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b };
+static const u16 NCT6116_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c };
+static const u16 NCT6116_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d };
+
+static const u16 NCT6116_REG_AUTO_TEMP[] = {
+ 0x160, 0x170, 0x180, 0x1d0, 0x1e0 };
+static const u16 NCT6116_REG_AUTO_PWM[] = {
+ 0x164, 0x174, 0x184, 0x1d4, 0x1e4 };
+
+static const u16 NCT6116_REG_ALARM[NUM_REG_ALARM] = {
+ 0x77, 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d };
+
+static const s8 NCT6116_ALARM_BITS[] = {
+ 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */
+ 9, -1, -1, -1, -1, -1, -1, /* in8..in9 */
+ -1, /* unused */
+ 32, 33, 34, 35, 36, /* fan1..fan5 */
+ -1, -1, -1, /* unused */
+ 16, 17, 18, -1, -1, -1, /* temp1..temp6 */
+ 48, -1 /* intrusion0, intrusion1 */
+};
+
+static const u16 NCT6116_REG_BEEP[NUM_REG_BEEP] = {
+ 0x3c0, 0x3c1, 0x3c2, 0x3c3, 0x3c4 };
+
+static const s8 NCT6116_BEEP_BITS[] = {
+ 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */
+ 9, 10, 11, 12, -1, -1, -1, /* in8..in14 */
+ 32, /* global beep enable */
+ 24, 25, 26, 27, 28, /* fan1..fan5 */
+ -1, -1, -1, /* unused */
+ 16, 17, 18, -1, -1, -1, /* temp1..temp6 */
+ 34, -1 /* intrusion0, intrusion1 */
+};
+
+static const u16 NCT6116_REG_TEMP_ALTERNATE[32] = {
+ [14] = 0x51,
+ [15] = 0x52,
+ [16] = 0x54,
+};
+
+static const u16 NCT6116_REG_TEMP_CRIT[32] = {
+ [11] = 0x204,
+ [12] = 0x205,
+};
+
+
+
static enum pwm_enable reg_to_pwm_enable(int pwm, int mode)
{
if (mode == 0 && pwm == 255)
@@ -1308,6 +1425,11 @@
return reg == 0x20 || reg == 0x22 || reg == 0x24 ||
reg == 0xe0 || reg == 0xe2 || reg == 0xe4 ||
reg == 0x111 || reg == 0x121 || reg == 0x131;
+ case nct6116:
+ return reg == 0x20 || reg == 0x22 || reg == 0x24 ||
+ reg == 0x26 || reg == 0x28 || reg == 0xe0 || reg == 0xe2 ||
+ reg == 0xe4 || reg == 0xe6 || reg == 0xe8 || reg == 0x111 ||
+ reg == 0x121 || reg == 0x131 || reg == 0x191 || reg == 0x1a1;
case nct6775:
return (((reg & 0xff00) == 0x100 ||
(reg & 0xff00) == 0x200) &&
@@ -1687,6 +1809,7 @@
data->auto_pwm[i][data->auto_pwm_num] = 0xff;
break;
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -3123,6 +3246,7 @@
case nct6776:
break; /* always enabled, nothing to do */
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -3544,7 +3668,7 @@
fan4min = fan4pin;
pwm3pin = fan3pin;
- } else if (data->kind == nct6106) {
+ } else if ((data->kind == nct6106) || (data->kind == nct6116)) {
int cr24 = superio_inb(sioreg, 0x24);
fan3pin = !(cr24 & 0x80);
@@ -3821,6 +3945,79 @@
reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H;
break;
+ case nct6116:
+ data->in_num = 9;
+ data->pwm_num = 3;
+ data->auto_pwm_num = 4;
+ data->temp_fixed_num = 3;
+ data->num_temp_alarms = 3;
+ data->num_temp_beeps = 3;
+
+ data->fan_from_reg = fan_from_reg13;
+ data->fan_from_reg_min = fan_from_reg13;
+
+ data->temp_label = nct6776_temp_label;
+ data->temp_mask = NCT6776_TEMP_MASK;
+ data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK;
+
+ data->REG_VBAT = NCT6116_REG_VBAT;
+ data->REG_DIODE = NCT6116_REG_DIODE;
+ data->DIODE_MASK = NCT6116_DIODE_MASK;
+ data->REG_VIN = NCT6116_REG_IN;
+ data->REG_IN_MINMAX[0] = NCT6116_REG_IN_MIN;
+ data->REG_IN_MINMAX[1] = NCT6116_REG_IN_MAX;
+ data->REG_TARGET = NCT6116_REG_TARGET;
+ data->REG_FAN = NCT6116_REG_FAN;
+ data->REG_FAN_MODE = NCT6116_REG_FAN_MODE;
+ data->REG_FAN_MIN = NCT6116_REG_FAN_MIN;
+ data->REG_FAN_PULSES = NCT6116_REG_FAN_PULSES;
+ data->FAN_PULSE_SHIFT = NCT6116_FAN_PULSE_SHIFT;
+ data->REG_FAN_TIME[0] = NCT6116_REG_FAN_STOP_TIME;
+ data->REG_FAN_TIME[1] = NCT6116_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6116_REG_FAN_STEP_DOWN_TIME;
+ data->REG_TOLERANCE_H = NCT6116_REG_TOLERANCE_H;
+ data->REG_PWM[0] = NCT6116_REG_PWM;
+ data->REG_PWM[1] = NCT6116_REG_FAN_START_OUTPUT;
+ data->REG_PWM[2] = NCT6116_REG_FAN_STOP_OUTPUT;
+ data->REG_PWM[5] = NCT6116_REG_WEIGHT_DUTY_STEP;
+ data->REG_PWM[6] = NCT6116_REG_WEIGHT_DUTY_BASE;
+ data->REG_PWM_READ = NCT6116_REG_PWM_READ;
+ data->REG_PWM_MODE = NCT6116_REG_PWM_MODE;
+ data->PWM_MODE_MASK = NCT6116_PWM_MODE_MASK;
+ data->REG_AUTO_TEMP = NCT6116_REG_AUTO_TEMP;
+ data->REG_AUTO_PWM = NCT6116_REG_AUTO_PWM;
+ data->REG_CRITICAL_TEMP = NCT6116_REG_CRITICAL_TEMP;
+ data->REG_CRITICAL_TEMP_TOLERANCE
+ = NCT6116_REG_CRITICAL_TEMP_TOLERANCE;
+ data->REG_CRITICAL_PWM_ENABLE = NCT6116_REG_CRITICAL_PWM_ENABLE;
+ data->CRITICAL_PWM_ENABLE_MASK
+ = NCT6116_CRITICAL_PWM_ENABLE_MASK;
+ data->REG_CRITICAL_PWM = NCT6116_REG_CRITICAL_PWM;
+ data->REG_TEMP_OFFSET = NCT6116_REG_TEMP_OFFSET;
+ data->REG_TEMP_SOURCE = NCT6116_REG_TEMP_SOURCE;
+ data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL;
+ data->REG_WEIGHT_TEMP_SEL = NCT6116_REG_WEIGHT_TEMP_SEL;
+ data->REG_WEIGHT_TEMP[0] = NCT6116_REG_WEIGHT_TEMP_STEP;
+ data->REG_WEIGHT_TEMP[1] = NCT6116_REG_WEIGHT_TEMP_STEP_TOL;
+ data->REG_WEIGHT_TEMP[2] = NCT6116_REG_WEIGHT_TEMP_BASE;
+ data->REG_ALARM = NCT6116_REG_ALARM;
+ data->ALARM_BITS = NCT6116_ALARM_BITS;
+ data->REG_BEEP = NCT6116_REG_BEEP;
+ data->BEEP_BITS = NCT6116_BEEP_BITS;
+
+ reg_temp = NCT6116_REG_TEMP;
+ reg_temp_mon = NCT6116_REG_TEMP_MON;
+ num_reg_temp = ARRAY_SIZE(NCT6116_REG_TEMP);
+ num_reg_temp_mon = ARRAY_SIZE(NCT6116_REG_TEMP_MON);
+ reg_temp_over = NCT6116_REG_TEMP_OVER;
+ reg_temp_hyst = NCT6116_REG_TEMP_HYST;
+ reg_temp_config = NCT6116_REG_TEMP_CONFIG;
+ reg_temp_alternate = NCT6116_REG_TEMP_ALTERNATE;
+ reg_temp_crit = NCT6116_REG_TEMP_CRIT;
+ reg_temp_crit_l = NCT6116_REG_TEMP_CRIT_L;
+ reg_temp_crit_h = NCT6116_REG_TEMP_CRIT_H;
+
+ break;
case nct6775:
data->in_num = 9;
data->pwm_num = 3;
@@ -4366,6 +4563,7 @@
data->have_vid = (cr2a & 0x60) == 0x40;
break;
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -4397,6 +4595,9 @@
case nct6106:
tmp |= 0xe0;
break;
+ case nct6116:
+ tmp |= 0xe0;
+ break;
case nct6775:
tmp |= 0x1e;
break;
@@ -4590,6 +4791,9 @@
case SIO_NCT6106_ID:
sio_data->kind = nct6106;
break;
+ case SIO_NCT6116_ID:
+ sio_data->kind = nct6116;
+ break;
case SIO_NCT6775_ID:
sio_data->kind = nct6775;
break;
