Hi Guenter,
I reworked the code after studying the details of the spec.
Changes:
- patch created against the tree of the kernel sources base dir
- only define the different registers in contrast to nct6106
- fixed details of the fan configuration
Signed-off-by: Bjoern Gerhart <gerh...@posteo.de>
---
diff -Naur a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
--- a/drivers/hwmon/nct6775.c 2019-07-19 15:29:34.960278982 +0200
+++ b/drivers/hwmon/nct6775.c 2019-07-19 15:29:47.332805721 +0200
@@ -34,6 +34,7 @@
*
* Chip #vin #fan #pwm #temp chip IDs man ID
* nct6106d 9 3 3 6+3 0xc450 0xc1 0x5ca3
+ * nct6116d 9 5 5 3+3 0xd280 0xc1 0x5ca3
* nct6775f 9 4 3 6+3 0xb470 0xc1 0x5ca3
* nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
@@ -72,12 +73,13 @@
#define USE_ALTERNATE
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
- nct6795, nct6796, nct6797, nct6798 };
+enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
+ nct6793, nct6795, nct6796, nct6797, nct6798 };
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
"nct6106",
+ "nct6116",
"nct6775",
"nct6776",
"nct6779",
@@ -92,6 +94,7 @@
static const char * const nct6775_sio_names[] __initconst = {
"NCT6106D",
+ "NCT6116D",
"NCT6775F",
"NCT6776D/F",
"NCT6779D",
@@ -129,6 +132,7 @@
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_NCT6106_ID 0xc450
+#define SIO_NCT6116_ID 0xd280
#define SIO_NCT6775_ID 0xb470
#define SIO_NCT6776_ID 0xc330
#define SIO_NCT6779_ID 0xc560
@@ -910,6 +914,78 @@
[12] = 0x205,
};
+/* NCT6112D/NCT6114D/NCT6116D specific data */
+
+static const u16 NCT6116_REG_TEMP[] = { 0x10, 0x11, 0x12 };
+static const u16 NCT6116_REG_TEMP_HYST[] = { 0xc3, 0xc7, 0xcb };
+static const u16 NCT6116_REG_TEMP_OVER[] = { 0xc2, 0xc6, 0xca };
+static const u16 NCT6116_REG_TEMP_CRIT_L[] = { 0xc0, 0xc4, 0xc8 };
+static const u16 NCT6116_REG_TEMP_CRIT_H[] = { 0xc1, 0xc5, 0xc9 };
+static const u16 NCT6116_REG_TEMP_CONFIG[] = { 0xb7, 0xb8, 0xb9 };
+
+static const u16 NCT6116_REG_FAN[] = { 0x20, 0x22, 0x24, 0x26, 0x28 };
+static const u16 NCT6116_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4, 0xe6, 0xe8 };
+static const u16 NCT6116_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6, 0xf6, 0xf5 };
+static const u16 NCT6116_FAN_PULSE_SHIFT[] = { 0, 2, 4, 6, 6 };
+
+static const u8 NCT6116_REG_PWM_MODE[] = { 0xf3, 0xf3, 0xf3 };
+static const u8 NCT6116_PWM_MODE_MASK[] = { 0x01, 0x02, 0x04 };
+static const u16 NCT6116_REG_PWM[] = { 0x119, 0x129, 0x139, 0x199, 0x1a9 };
+static const u16 NCT6116_REG_FAN_MODE[] = { 0x113, 0x123, 0x133, 0x193, 0x1a3
};
+static const u16 NCT6116_REG_TEMP_SEL[] = { 0x110, 0x120, 0x130, 0x190, 0x1a0
};
+static const u16 NCT6116_REG_TEMP_SOURCE[] = { 0xb0, 0xb1, 0xb2 };
+
+static const u16 NCT6116_REG_CRITICAL_TEMP[] = {
+ 0x11a, 0x12a, 0x13a, 0x19a, 0x1aa };
+static const u16 NCT6116_REG_CRITICAL_TEMP_TOLERANCE[] = {
+ 0x11b, 0x12b, 0x13b, 0x19b, 0x1ab };
+
+static const u16 NCT6116_REG_CRITICAL_PWM_ENABLE[] = {
+ 0x11c, 0x12c, 0x13c, 0x19c, 0x1ac };
+static const u16 NCT6116_REG_CRITICAL_PWM[] = {
+ 0x11d, 0x12d, 0x13d, 0x19d, 0x1ad };
+
+static const u16 NCT6116_REG_FAN_STEP_UP_TIME[] = {
+ 0x114, 0x124, 0x134, 0x194, 0x1a4 };
+static const u16 NCT6116_REG_FAN_STEP_DOWN_TIME[] = {
+ 0x115, 0x125, 0x135, 0x195, 0x1a5 };
+static const u16 NCT6116_REG_FAN_STOP_OUTPUT[] = {
+ 0x116, 0x126, 0x136, 0x196, 0x1a6 };
+static const u16 NCT6116_REG_FAN_START_OUTPUT[] = {
+ 0x117, 0x127, 0x137, 0x197, 0x1a7 };
+static const u16 NCT6116_REG_FAN_STOP_TIME[] = {
+ 0x118, 0x128, 0x138, 0x198, 0x1a8 };
+static const u16 NCT6116_REG_TOLERANCE_H[] = {
+ 0x112, 0x122, 0x132, 0x192, 0x1a2 };
+
+static const u16 NCT6116_REG_TARGET[] = {
+ 0x111, 0x121, 0x131, 0x191, 0x1a1 };
+
+static const u16 NCT6116_REG_AUTO_TEMP[] = {
+ 0x160, 0x170, 0x180, 0x1d0, 0x1e0 };
+static const u16 NCT6116_REG_AUTO_PWM[] = {
+ 0x164, 0x174, 0x184, 0x1d4, 0x1e4 };
+
+static const s8 NCT6116_ALARM_BITS[] = {
+ 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */
+ 9, -1, -1, -1, -1, -1, -1, /* in8..in9 */
+ -1, /* unused */
+ 32, 33, 34, 35, 36, /* fan1..fan5 */
+ -1, -1, -1, /* unused */
+ 16, 17, 18, -1, -1, -1, /* temp1..temp6 */
+ 48, -1 /* intrusion0, intrusion1 */
+};
+
+static const s8 NCT6116_BEEP_BITS[] = {
+ 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */
+ 9, 10, 11, 12, -1, -1, -1, /* in8..in14 */
+ 32, /* global beep enable */
+ 24, 25, 26, 27, 28, /* fan1..fan5 */
+ -1, -1, -1, /* unused */
+ 16, 17, 18, -1, -1, -1, /* temp1..temp6 */
+ 34, -1 /* intrusion0, intrusion1 */
+};
+
static enum pwm_enable reg_to_pwm_enable(int pwm, int mode)
{
if (mode == 0 && pwm == 255)
@@ -1308,6 +1384,11 @@
return reg == 0x20 || reg == 0x22 || reg == 0x24 ||
reg == 0xe0 || reg == 0xe2 || reg == 0xe4 ||
reg == 0x111 || reg == 0x121 || reg == 0x131;
+ case nct6116:
+ return reg == 0x20 || reg == 0x22 || reg == 0x24 ||
+ reg == 0x26 || reg == 0x28 || reg == 0xe0 || reg == 0xe2 ||
+ reg == 0xe4 || reg == 0xe6 || reg == 0xe8 || reg == 0x111 ||
+ reg == 0x121 || reg == 0x131 || reg == 0x191 || reg == 0x1a1;
case nct6775:
return (((reg & 0xff00) == 0x100 ||
(reg & 0xff00) == 0x200) &&
@@ -1687,6 +1768,7 @@
data->auto_pwm[i][data->auto_pwm_num] = 0xff;
break;
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -3123,6 +3205,7 @@
case nct6776:
break; /* always enabled, nothing to do */
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -3549,6 +3632,28 @@
fan3pin = !(cr24 & 0x80);
pwm3pin = cr24 & 0x08;
+ } else if (data->kind == nct6116) {
+ int cr1a = superio_inb(sioreg, 0x1a);
+ int cr1b = superio_inb(sioreg, 0x1b);
+ int cr24 = superio_inb(sioreg, 0x24);
+ int cr2a = superio_inb(sioreg, 0x2a);
+ int cr2b = superio_inb(sioreg, 0x2b);
+ int cr2f = superio_inb(sioreg, 0x2f);
+
+ fan3pin = !(cr2b & 0x10);
+ if (!(cr2f & 0x10))
+ fan4pin = cr1a & 0x04;
+ else
+ fan4pin = 0;
+
+ if (!(cr1b & 0x03))
+ fan5pin = cr2a & 0x02;
+ else
+ fan5pin = cr2b & 0x80;
+
+ pwm3pin = cr24 & 0x08;
+ pwm4pin = cr2b & 0x80;
+ pwm5pin = pwm4pin;
} else {
/*
* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
@@ -3821,6 +3926,79 @@
reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H;
break;
+ case nct6116:
+ data->in_num = 9;
+ data->pwm_num = 3;
+ data->auto_pwm_num = 4;
+ data->temp_fixed_num = 3;
+ data->num_temp_alarms = 3;
+ data->num_temp_beeps = 3;
+
+ data->fan_from_reg = fan_from_reg13;
+ data->fan_from_reg_min = fan_from_reg13;
+
+ data->temp_label = nct6776_temp_label;
+ data->temp_mask = NCT6776_TEMP_MASK;
+ data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK;
+
+ data->REG_VBAT = NCT6106_REG_VBAT;
+ data->REG_DIODE = NCT6106_REG_DIODE;
+ data->DIODE_MASK = NCT6106_DIODE_MASK;
+ data->REG_VIN = NCT6106_REG_IN;
+ data->REG_IN_MINMAX[0] = NCT6106_REG_IN_MIN;
+ data->REG_IN_MINMAX[1] = NCT6106_REG_IN_MAX;
+ data->REG_TARGET = NCT6116_REG_TARGET;
+ data->REG_FAN = NCT6116_REG_FAN;
+ data->REG_FAN_MODE = NCT6116_REG_FAN_MODE;
+ data->REG_FAN_MIN = NCT6116_REG_FAN_MIN;
+ data->REG_FAN_PULSES = NCT6116_REG_FAN_PULSES;
+ data->FAN_PULSE_SHIFT = NCT6116_FAN_PULSE_SHIFT;
+ data->REG_FAN_TIME[0] = NCT6116_REG_FAN_STOP_TIME;
+ data->REG_FAN_TIME[1] = NCT6116_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6116_REG_FAN_STEP_DOWN_TIME;
+ data->REG_TOLERANCE_H = NCT6116_REG_TOLERANCE_H;
+ data->REG_PWM[0] = NCT6116_REG_PWM;
+ data->REG_PWM[1] = NCT6116_REG_FAN_START_OUTPUT;
+ data->REG_PWM[2] = NCT6116_REG_FAN_STOP_OUTPUT;
+ data->REG_PWM[5] = NCT6106_REG_WEIGHT_DUTY_STEP;
+ data->REG_PWM[6] = NCT6106_REG_WEIGHT_DUTY_BASE;
+ data->REG_PWM_READ = NCT6106_REG_PWM_READ;
+ data->REG_PWM_MODE = NCT6116_REG_PWM_MODE;
+ data->PWM_MODE_MASK = NCT6116_PWM_MODE_MASK;
+ data->REG_AUTO_TEMP = NCT6116_REG_AUTO_TEMP;
+ data->REG_AUTO_PWM = NCT6116_REG_AUTO_PWM;
+ data->REG_CRITICAL_TEMP = NCT6116_REG_CRITICAL_TEMP;
+ data->REG_CRITICAL_TEMP_TOLERANCE
+ = NCT6116_REG_CRITICAL_TEMP_TOLERANCE;
+ data->REG_CRITICAL_PWM_ENABLE = NCT6116_REG_CRITICAL_PWM_ENABLE;
+ data->CRITICAL_PWM_ENABLE_MASK
+ = NCT6106_CRITICAL_PWM_ENABLE_MASK;
+ data->REG_CRITICAL_PWM = NCT6116_REG_CRITICAL_PWM;
+ data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET;
+ data->REG_TEMP_SOURCE = NCT6116_REG_TEMP_SOURCE;
+ data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL;
+ data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL;
+ data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP;
+ data->REG_WEIGHT_TEMP[1] = NCT6106_REG_WEIGHT_TEMP_STEP_TOL;
+ data->REG_WEIGHT_TEMP[2] = NCT6106_REG_WEIGHT_TEMP_BASE;
+ data->REG_ALARM = NCT6106_REG_ALARM;
+ data->ALARM_BITS = NCT6116_ALARM_BITS;
+ data->REG_BEEP = NCT6106_REG_BEEP;
+ data->BEEP_BITS = NCT6116_BEEP_BITS;
+
+ reg_temp = NCT6116_REG_TEMP;
+ reg_temp_mon = NCT6106_REG_TEMP_MON;
+ num_reg_temp = ARRAY_SIZE(NCT6116_REG_TEMP);
+ num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON);
+ reg_temp_over = NCT6116_REG_TEMP_OVER;
+ reg_temp_hyst = NCT6116_REG_TEMP_HYST;
+ reg_temp_config = NCT6116_REG_TEMP_CONFIG;
+ reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE;
+ reg_temp_crit = NCT6106_REG_TEMP_CRIT;
+ reg_temp_crit_l = NCT6116_REG_TEMP_CRIT_L;
+ reg_temp_crit_h = NCT6116_REG_TEMP_CRIT_H;
+
+ break;
case nct6775:
data->in_num = 9;
data->pwm_num = 3;
@@ -4366,6 +4544,7 @@
data->have_vid = (cr2a & 0x60) == 0x40;
break;
case nct6106:
+ case nct6116:
case nct6779:
case nct6791:
case nct6792:
@@ -4397,6 +4576,9 @@
case nct6106:
tmp |= 0xe0;
break;
+ case nct6116:
+ tmp |= 0xe0;
+ break;
case nct6775:
tmp |= 0x1e;
break;
@@ -4590,6 +4772,9 @@
case SIO_NCT6106_ID:
sio_data->kind = nct6106;
break;
+ case SIO_NCT6116_ID:
+ sio_data->kind = nct6116;
+ break;
case SIO_NCT6775_ID:
sio_data->kind = nct6775;
break;
