On Sat, Nov 14, 2026 at 05:43:06PM +0000, Michael Kelley wrote: > From: Hamza Mahfooz <[email protected]> Sent: Friday, November > 13, 2026 1:59 PM > > > > I was doing a deep dive into the host spec and noticed some gaps. So, > > I went ahead and hacked together the patches in this series for items > > that seemed worthwhile to address. > > Are you (or someone on the Microsoft side) testing these changes > in a Generation 1 VM, as well as on back revs of the Hyper-V host?
Ya, I have smoke tested all of these patches on WS2016 (both gen1 and gen2). Also, I have it on good authority that they should be good at least as far back as VMBus v3.0, so it should cover everything that is currently supported. > Testing should go back to Windows Server 2016/Windows 10 for > both Gen1 and Gen2. > > Same questions apply to your earlier cursor plane support. I just > did basic smoke testing of the cursor plane support on both Gen1 > and Gen2 VMs using vmconnect.exe on an up-to-date Windows 11 > host -- no obvious problems. But I don't have access to older hosts > like WS2016/Win10 to do the back rev testing. > > There are multiple frame buffer differences in Gen1 and Gen2 VMs, > but most (or all?) are in the lowest layer in how the frame buffer is > allocated and mapped. Hopefully these higher-level changes you are > making are agnostic of the VM generation, but thoroughness would > dictate testing both. > > I'm less sure about what might have changed in current Hyper-V > versions and WS2016 from 10 years ago. My general impression is > that very little, if anything, has changed in the Hyper-V frame buffer > support, but again it would be better to not get a bad surprise after > the code has gone in. > > Michael > > > > > Hamza Mahfooz (2): > > drm/hyperv: add modes for all resolutions offered by the host > > drm/hyperv: batch dirty rectangles > > > > drivers/gpu/drm/hyperv/hyperv_drm.h | 15 ++++ > > drivers/gpu/drm/hyperv/hyperv_drm_drv.c | 4 ++ > > drivers/gpu/drm/hyperv/hyperv_drm_modeset.c | 32 ++++++++- > > drivers/gpu/drm/hyperv/hyperv_drm_proto.c | 79 ++++++++++++++++----- > > 4 files changed, 110 insertions(+), 20 deletions(-) > > > > -- > > 2.56.0
