From: Hamza Mahfooz <[email protected]> Sent: Monday, November 
16, 2026 7:02 AM
> 
> On Sat, Nov 14, 2026 at 05:43:06PM +0000, Michael Kelley wrote:
> > From: Hamza Mahfooz <[email protected]> Sent: Friday,
> November 13, 2026 1:59 PM
> > >
> > > I was doing a deep dive into the host spec and noticed some gaps. So,
> > > I went ahead and hacked together the patches in this series for items
> > > that seemed worthwhile to address.
> >
> > Are you (or someone on the Microsoft side) testing these changes
> > in a Generation 1 VM, as well as on back revs of the Hyper-V host?
> 
> Ya, I have smoke tested all of these patches on WS2016 (both gen1 and
> gen2). Also, I have it on good authority that they should be good at
> least as far back as VMBus v3.0, so it should cover everything that
> is currently supported.

Excellent.  Thanks.

Michael

> 
> > Testing should go back to Windows Server 2016/Windows 10 for
> > both Gen1 and Gen2.
> >
> > Same questions apply to your earlier cursor plane support. I just
> > did basic smoke testing of the cursor plane support on both Gen1
> > and Gen2 VMs using vmconnect.exe on an up-to-date Windows 11
> > host -- no obvious problems. But I don't have access to older hosts
> > like WS2016/Win10 to do the back rev testing.
> >
> > There are multiple frame buffer differences in Gen1 and Gen2 VMs,
> > but most (or all?) are in the lowest layer in how the frame buffer is
> > allocated and mapped. Hopefully these higher-level changes you are
> > making are agnostic of the VM generation, but thoroughness would
> > dictate testing both.
> >
> > I'm less sure about what might have changed in current Hyper-V
> > versions and WS2016 from 10 years ago. My general impression is
> > that very little, if anything, has changed in the Hyper-V frame buffer
> > support, but again it would be better to not get a bad surprise after
> > the code has gone in.
> >
> > Michael
> >
> > >
> > > Hamza Mahfooz (2):
> > >   drm/hyperv: add modes for all resolutions offered by the host
> > >   drm/hyperv: batch dirty rectangles
> > >
> > >  drivers/gpu/drm/hyperv/hyperv_drm.h         | 15 ++++
> > >  drivers/gpu/drm/hyperv/hyperv_drm_drv.c     |  4 ++
> > >  drivers/gpu/drm/hyperv/hyperv_drm_modeset.c | 32 ++++++++-
> > >  drivers/gpu/drm/hyperv/hyperv_drm_proto.c   | 79 ++++++++++++++++-----
> > >  4 files changed, 110 insertions(+), 20 deletions(-)
> > >
> > > --
> > > 2.56.0

Reply via email to