This adds empty directories and the neccessary entries to Makefiles and
Kconfigs in order to provide a place for hardware sensors which are not
meant to be based in drivers/hwmon.

Signed-off-by: Daniel Mack <[email protected]>
---
 How about this approach? Take it as RFC ...

 arch/arm/Kconfig         |    2 ++
 drivers/Kconfig          |    2 ++
 drivers/Makefile         |    1 +
 drivers/sensors/Kconfig  |   20 ++++++++++++++++++++
 drivers/sensors/Makefile |    4 ++++
 5 files changed, 29 insertions(+), 0 deletions(-)
 create mode 100644 drivers/sensors/Kconfig
 create mode 100644 drivers/sensors/Makefile

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbfdf87..91a6c55 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1283,6 +1283,8 @@ source "drivers/power/Kconfig"
 
 source "drivers/hwmon/Kconfig"
 
+source "drivers/sensors/Kconfig"
+
 source "drivers/thermal/Kconfig"
 
 source "drivers/watchdog/Kconfig"
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 00cf955..57a9578 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -60,6 +60,8 @@ source "drivers/power/Kconfig"
 
 source "drivers/hwmon/Kconfig"
 
+source "drivers/sensors/Kconfig"
+
 source "drivers/thermal/Kconfig"
 
 source "drivers/watchdog/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index c1bf417..207a0d5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -74,6 +74,7 @@ obj-y                         += i2c/
 obj-$(CONFIG_W1)               += w1/
 obj-$(CONFIG_POWER_SUPPLY)     += power/
 obj-$(CONFIG_HWMON)            += hwmon/
+obj-$(CONFIG_SENSORS)          += sensors/
 obj-$(CONFIG_THERMAL)          += thermal/
 obj-$(CONFIG_WATCHDOG)         += watchdog/
 obj-$(CONFIG_PHONE)            += telephony/
diff --git a/drivers/sensors/Kconfig b/drivers/sensors/Kconfig
new file mode 100644
index 0000000..bc85c90
--- /dev/null
+++ b/drivers/sensors/Kconfig
@@ -0,0 +1,20 @@
+#
+# Sensor drivers
+#
+
+menuconfig SENSORS
+       tristate "Sensor drivers"
+       depends on HAS_IOMEM
+       default n
+       help
+         Sensor drivers are for special purpose devices that can monitor
+         ambient light, motion, temperature and the like.
+
+         Check file:Documentation/sensors to see which devices are
+         currently supported.
+
+
+if SENSORS
+
+endif # SENSORS
+
diff --git a/drivers/sensors/Makefile b/drivers/sensors/Makefile
new file mode 100644
index 0000000..4c629c2
--- /dev/null
+++ b/drivers/sensors/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for sensor chip drivers.
+#
+
-- 
1.6.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to