On Thu, Feb 26, 2009 at 02:24:06PM +0100, Daniel Mack wrote: > This adds empty directories and the neccessary entries to Makefiles and > Kconfigs in order to provide a place for hardware sensors which are not > meant to be based in drivers/hwmon. > > Signed-off-by: Daniel Mack <[email protected]> > --- > How about this approach? Take it as RFC ...
Any oppinion on this, anyone? I'm currently writing a driver for an accelerometer and will have the same uncertainty of where to put it in the end. Daniel > > arch/arm/Kconfig | 2 ++ > drivers/Kconfig | 2 ++ > drivers/Makefile | 1 + > drivers/sensors/Kconfig | 20 ++++++++++++++++++++ > drivers/sensors/Makefile | 4 ++++ > 5 files changed, 29 insertions(+), 0 deletions(-) > create mode 100644 drivers/sensors/Kconfig > create mode 100644 drivers/sensors/Makefile > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index dbfdf87..91a6c55 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -1283,6 +1283,8 @@ source "drivers/power/Kconfig" > > source "drivers/hwmon/Kconfig" > > +source "drivers/sensors/Kconfig" > + > source "drivers/thermal/Kconfig" > > source "drivers/watchdog/Kconfig" > diff --git a/drivers/Kconfig b/drivers/Kconfig > index 00cf955..57a9578 100644 > --- a/drivers/Kconfig > +++ b/drivers/Kconfig > @@ -60,6 +60,8 @@ source "drivers/power/Kconfig" > > source "drivers/hwmon/Kconfig" > > +source "drivers/sensors/Kconfig" > + > source "drivers/thermal/Kconfig" > > source "drivers/watchdog/Kconfig" > diff --git a/drivers/Makefile b/drivers/Makefile > index c1bf417..207a0d5 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -74,6 +74,7 @@ obj-y += i2c/ > obj-$(CONFIG_W1) += w1/ > obj-$(CONFIG_POWER_SUPPLY) += power/ > obj-$(CONFIG_HWMON) += hwmon/ > +obj-$(CONFIG_SENSORS) += sensors/ > obj-$(CONFIG_THERMAL) += thermal/ > obj-$(CONFIG_WATCHDOG) += watchdog/ > obj-$(CONFIG_PHONE) += telephony/ > diff --git a/drivers/sensors/Kconfig b/drivers/sensors/Kconfig > new file mode 100644 > index 0000000..bc85c90 > --- /dev/null > +++ b/drivers/sensors/Kconfig > @@ -0,0 +1,20 @@ > +# > +# Sensor drivers > +# > + > +menuconfig SENSORS > + tristate "Sensor drivers" > + depends on HAS_IOMEM > + default n > + help > + Sensor drivers are for special purpose devices that can monitor > + ambient light, motion, temperature and the like. > + > + Check file:Documentation/sensors to see which devices are > + currently supported. > + > + > +if SENSORS > + > +endif # SENSORS > + > diff --git a/drivers/sensors/Makefile b/drivers/sensors/Makefile > new file mode 100644 > index 0000000..4c629c2 > --- /dev/null > +++ b/drivers/sensors/Makefile > @@ -0,0 +1,4 @@ > +# > +# Makefile for sensor chip drivers. > +# > + > -- > 1.6.1.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-i2c" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
