Dear Torsten Fleischer, > Hi Marek, > > > > > + > > > > + /* Check NAK here ? */ > > > > > > checking for the NAK at this point is really necessary. > > > > > > I've tested the patches by writing to the EEPROM using the at24 driver. > > > If the data to write cross the EEPROM's page boundary then the at24 > > > driver splits the I2C write commands. > > > > > > After the first I2C write command is done the at24 driver immediately > > > tries > > > to send the next I2C write command. Normally the EEPROM signals a NAK, > > > because the previous write operation is internally still in progress. > > > The NAK will be handled by the at24 driver. It later retries the I2C > > > write command. > > > > > > But if the the EEPROM signals a NAK and the I2C write command has more > > > than > > > 3 and less than 7 bytes then the error "PIO: Failed to finish WRITE > > > cmd!" appears, because the loop is not exited due to the NAK. > > > > Ok, so we check > > > > HW_I2C_STAT :: GOT_A_NAK bit at the end of the loop and if it's set, we > > "goto cleanup" with ret = -ENXIO . How does it sound to you? > > this sounds good to me.
Does it fix your EEPROM issue then ? Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
