Woke up to this, this morning. This is yesterdays 2.6.11-rc4 BK + libata BK + libata-dev BK It was in the middle of a RAID-6 rebuild (scheduled to take about 740 minutes)
Regards, Brad
Feb 16 07:32:17 storage1 kernel: ata15: command timeout
Feb 16 07:32:17 storage1 kernel: Assertion failed! qc->flags & ATA_QCFLAG_ACTIVE,drivers/scsi/libata-core.c,ata_qc_complete,line=2703
Feb 16 07:32:17 storage1 kernel: ata15: status=0x51 { DriveReady SeekComplete Error }
Feb 16 07:32:17 storage1 kernel: ata15: called with no error (51)!
Feb 16 07:32:17 storage1 kernel: ------------[ cut here ]------------
Feb 16 07:32:17 storage1 kernel: kernel BUG at drivers/scsi/scsi.c:299!
Feb 16 07:32:17 storage1 kernel: invalid operand: 0000 [#1]
Feb 16 07:32:17 storage1 kernel: CPU: 0
Feb 16 07:32:17 storage1 kernel: EIP: 0060:[<c0257a0b>] Not tainted VLI
Feb 16 07:32:17 storage1 kernel: EFLAGS: 00010046 (2.6.11-rc4)
Feb 16 07:32:17 storage1 kernel: EIP is at scsi_put_command+0x8b/0xa0
Feb 16 07:32:17 storage1 kernel: eax: df99cb80 ebx: df99cb80 ecx: df99cb90 edx: df99cb90
Feb 16 07:32:17 storage1 kernel: esi: dfc70000 edi: 00000292 ebp: dfc66400 esp: dfcabe7c
Feb 16 07:32:17 storage1 kernel: ds: 007b es: 007b ss: 0068
Feb 16 07:32:17 storage1 kernel: Process scsi_eh_14 (pid: 799, threadinfo=dfcaa000 task=dfc73a20)
Feb 16 07:32:17 storage1 kernel: Stack: dfc7d3c8 dfcc6200 dfc65a28 df99cb80 00000296 dfc65a28 c025c859 df99cb80
Feb 16 07:32:17 storage1 kernel: dfc7d3c8 c025c97f df99cb80 00000001 00000000 df99cb80 df99cb80 00000004
Feb 16 07:32:17 storage1 kernel: df99cc3c c025ccfe df99cb80 00000001 00000000 00000000 000057b3 000057b3
Feb 16 07:32:17 storage1 kernel: Call Trace:
Feb 16 07:32:17 storage1 kernel: [<c025c859>] scsi_next_command+0x19/0x30
Feb 16 07:32:17 storage1 kernel: [<c025c97f>] scsi_end_request+0xbf/0xe0
Feb 16 07:32:17 storage1 kernel: [<c025ccfe>] scsi_io_completion+0x1ae/0x490
Feb 16 07:32:17 storage1 kernel: [<c026927b>] sd_rw_intr+0xcb/0x280
Feb 16 07:32:17 storage1 kernel: [<c02580ea>] scsi_finish_command+0x7a/0xc0
Feb 16 07:32:17 storage1 kernel: [<c0266ad9>] ata_scsi_qc_complete+0x39/0x70
Feb 16 07:32:17 storage1 kernel: [<c026460a>] ata_qc_complete+0x3a/0xc0
Feb 16 07:32:17 storage1 kernel: [<c0267e30>] pdc_eng_timeout+0x90/0x120
Feb 16 07:32:17 storage1 kernel: [<c026663a>] ata_scsi_error+0x1a/0x30
Feb 16 07:32:17 storage1 kernel: [<c025bd4e>] scsi_error_handler+0x9e/0xe0
Feb 16 07:32:17 storage1 kernel: [<c025bcb0>] scsi_error_handler+0x0/0xe0
Feb 16 07:32:17 storage1 kernel: [<c0100831>] kernel_thread_helper+0x5/0x14
Feb 16 07:32:17 storage1 kernel: Code: 5c 24 08 8b 74 24 0c 89 44 24 1c 8b 7c 24 10 8b 6c 24 14 83 c4 18 e9 e5 15 fd ff 89 43 10 89 48 04 31 db 89 51 04 89 4e 0c eb b7 <0f> 0b 2b 01 e7 1a 32 c0 eb 95 8d 74 26 00 8d bc 27
00 00 00 00
Feb 16 07:32:19 storage1 kernel: <1>Unable to handle kernel NULL pointer dereference at virtual address 00000004
Feb 16 07:32:19 storage1 kernel: printing eip:
Feb 16 07:32:19 storage1 kernel: c01333c3
Feb 16 07:32:19 storage1 kernel: *pde = 00000000
Feb 16 07:32:19 storage1 kernel: Oops: 0000 [#2]
Feb 16 07:32:19 storage1 kernel: CPU: 0
Feb 16 07:32:19 storage1 kernel: EIP: 0060:[<c01333c3>] Not tainted VLI
Feb 16 07:32:19 storage1 kernel: EFLAGS: 00010016 (2.6.11-rc4)
Feb 16 07:32:19 storage1 kernel: EIP is at free_block+0x43/0xd0
Feb 16 07:32:19 storage1 kernel: eax: 00800000 ebx: 00000000 ecx: 00000000 edx: c1000000
Feb 16 07:32:19 storage1 kernel: esi: c1506d60 edi: 00000000 ebp: c1506d6c esp: c14e9ef0
Feb 16 07:32:19 storage1 kernel: ds: 007b es: 007b ss: 0068
Feb 16 07:32:19 storage1 kernel: Process events/0 (pid: 3, threadinfo=c14e8000 task=c14da020)
Feb 16 07:32:19 storage1 kernel: Stack: c0132601 00000014 c1506d7c dff08b70 dff08b60 00000001 c1506d60 c0133a0a
Feb 16 07:32:19 storage1 kernel: c1506d60 dff08b70 00000001 c1506d60 00000003 c1506dd0 c1506cfc c0133aaa
Feb 16 07:32:19 storage1 kernel: c1506d60 dff08b60 00000000 c14da170 00000293 00000000 c051fca4 c0133a50
Feb 16 07:32:19 storage1 kernel: Call Trace:
Feb 16 07:32:19 storage1 kernel: [<c0132601>] kmem_freepages+0x81/0xa0
Feb 16 07:32:19 storage1 kernel: [<c0133a0a>] drain_array_locked+0x7a/0xc0
Feb 16 07:32:19 storage1 kernel: [<c0133aaa>] cache_reap+0x5a/0x150
Feb 16 07:32:19 storage1 kernel: [<c0133a50>] cache_reap+0x0/0x150
Feb 16 07:32:19 storage1 kernel: [<c012326e>] worker_thread+0x19e/0x240
Feb 16 07:32:19 storage1 kernel: [<c0111b50>] default_wake_function+0x0/0x20
Feb 16 07:32:19 storage1 kernel: [<c0111b50>] default_wake_function+0x0/0x20
Feb 16 07:32:19 storage1 kernel: [<c01230d0>] worker_thread+0x0/0x240
Feb 16 07:32:19 storage1 kernel: [<c0126ae5>] kthread+0xa5/0xb0
Feb 16 07:32:19 storage1 kernel: [<c0126a40>] kthread+0x0/0xb0
Feb 16 07:32:19 storage1 kernel: [<c0100831>] kernel_thread_helper+0x5/0x14
Feb 16 07:32:19 storage1 kernel: Code: 83 00 00 00 8d 46 1c 8d 6e 0c 89 44 24 08 8b 44 24 24 8b 15 b0 fd 51 c0 8b 0c b8 8d 81 00 00 00 40 c1 e8 0c c1 e0 05 8b 5c 02 1c <8b> 53 04 8b 03 89 50 04 89 02 c7 43 04 00 02 20 00
2b 4b 0c c7
storage1:/home/brad# lspci -vv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
Subsystem: Asustek Computer, Inc. A7V8X motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8,x@
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e6000000-e7dfffff
Prefetchable memory behind bridge: e7f00000-efffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
0000:00:0b.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 0x90 (576 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at d400 [size=64]
Region 1: I/O ports at d000 [size=16]
Region 2: I/O ports at b800 [size=128]
Region 3: Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at e4800000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0d.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 0x90 (576 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b400 [size=64]
Region 1: I/O ports at b000 [size=16]
Region 2: I/O ports at a800 [size=128]
Region 3: Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at e3800000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0e.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at a400 [size=64]
Region 1: I/O ports at a000 [size=16]
Region 2: I/O ports at 9800 [size=128]
Region 3: Memory at e3000000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at e2800000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 9400 [size=8]
Region 1: I/O ports at 9000 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8400 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: I/O ports at 7800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 14
Region 4: I/O ports at 7400 [disabled] [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 7000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 6800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 6400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 6000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin C routed to IRQ 0
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:13.0 Unknown mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02)
Subsystem: Promise Technology, Inc. PDC20318 (SATA150 TX4)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 5800 [size=64]
Region 1: I/O ports at 5400 [size=16]
Region 2: I/O ports at 5000 [size=128]
Region 3: Memory at e1800000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at e1000000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) (prog-if 00 [VGA])
Subsystem: Unknown device 1682:201a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at e7fe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 CONFIG_X86_PC=y CONFIG_MK7=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_NOHIGHMEM=y CONFIG_MTRR=y CONFIG_PM=y CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_BLACKLIST_YEAR=0 CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_PCI=y CONFIG_PCI_GOBIOS=y CONFIG_PCI_BIOS=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_BINFMT_ELF=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_INITRAMFS_SOURCE="" CONFIG_LBD=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SATA=y CONFIG_SCSI_SATA_PROMISE=y CONFIG_SCSI_QLA2XXX=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_RAID6=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETDEVICES=y CONFIG_SK98LIN=y CONFIG_INPUT=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_LIBPS2=y CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_RTC=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ISA=y CONFIG_I2C_SENSOR=y CONFIG_SENSORS_IT87=y CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_EXT3_FS=y CONFIG_JBD=y CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_DEVFS_FS=y CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_EARLY_PRINTK=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_CRYPTO=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_DES=y CONFIG_CRC32=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y
storage1:/home/brad# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi3 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi5 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi7 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi8 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi9 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi10 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi11 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi12 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi13 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi14 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05
storage1:/home/brad# cat /proc/meminfo
MemTotal: 514824 kB
MemFree: 453212 kB
Buffers: 772 kB
Cached: 27820 kB
SwapCached: 0 kB
Active: 12788 kB
Inactive: 20320 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 514824 kB
LowFree: 453212 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
Mapped: 9480 kB
Slab: 11148 kB
CommitLimit: 257412 kB
Committed_AS: 12824 kB
PageTables: 424 kB
VmallocTotal: 516024 kB
VmallocUsed: 96 kB
VmallocChunk: 515920 kB
storage1:/home/brad# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 8
model name : AMD Sempron(TM) 2600+
stepping : 1
cpu MHz : 0.000
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse pni syscall mp mmxext 3dnowext 3dnow
bogomips : 1828.45
storage1:/home/brad# cat /proc/devices Character devices: 1 mem 2 pty 3 ttyp 4 /dev/vc/0 4 tty 4 ttyS 5 /dev/tty 5 /dev/console 5 /dev/ptmx 7 vcs 10 misc 13 input 89 i2c 128 ptm 136 pts 254 devfs
Block devices:
8 sd
9 md
65 sd
66 sd
67 sd
68 sd
69 sd
70 sd
71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
254 mdp
storage1:/home/brad# cat /proc/interrupts
CPU0
0: 234810 IO-APIC-edge timer
1: 74 IO-APIC-edge i8042
8: 4 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
16: 237783 IO-APIC-level libata
17: 234690 IO-APIC-level libata
18: 322433 IO-APIC-level SysKonnect SK-98xx, libata
19: 214411 IO-APIC-level libata
NMI: 0
LOC: 235733
ERR: 0
MIS: 0-- "Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so." -- Douglas Adams - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
