I replaced 80 wire flat cable with another 40 wire cable. In this way I have no errors but now UDMA mode is set to 2 value. I'm sure that MOTHERBOARD supports UDMA ATA/33/66/100 BUS IDE ports. What do you think ?
>-- Messaggio Originale -- >Subject: Re: DriveStatusError BadCRC >From: Erik Slagter <[EMAIL PROTECTED]> >To: [email protected] >Date: Mon, 08 Aug 2005 11:54:17 +0200 > > >On Sun, 2005-08-07 at 08:38 -0600, Eric D. Mudama wrote: >> 51/84 indicates the crc failed on the incoming write data from your >> system. These failures should be very rare (on PATA), but the bummer >> is they don't have anything to do with bad blocks on the media or >> degrading heads... >> >> What is the temperature like inside your case? What host adapter are >> you using? How many drives in the system? > >I'd suggest trying another cable... And also a lower UDMA setting. > >Allegato: signature.asc > __________________________________________________________________ TISCALI ADSL 1.25 MEGA Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone Telecom a partire da 19,95 Euro/mese. Attivala entro il 31 agosto, il primo MESE รจ GRATIS! CLICCA QUI. http://abbonati.tiscali.it/adsl/sa/1e25flat_tc/ - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
